DIASONIC MODEL DMP-200EN User’s Manual WARRANTY CARD INCLUDED Thank you for your purchasing the DIASONIC MP3 player! If you use DIASONIC MP3 player for the first time, please read this manual carefully before use.
Introduction Thank you for purchasing the DIASONIC MP3 player. Please read this manual carefully before use. When the device is broken or has a problem, please contact us or a dealer. Caution: ● Never attempt to repair, disassemble or modify the device by yourself.
Caution for safety Alarm ● Please keep the battery out of reach of small children as it is dangerous for them. If a child accidentally swallows the battery, seek medical advice immediately. ● Do not short, disassemble, apply heat or pressure and put the battery into a fire. It may cause leakage, heat emission, breakage, a fire, etc. ● If the battery leaks and fluid gets into your eyes, wipe out it with water and seek medical treatment immediately.
Index Caution …………………………………………………………… MP3 Player 1. Function and feature 2. Part name and LCD display 3. Battery use and its package contents 4. How to use 5. How to use button 6. How to control menu dial 7. Table of the menu in stop mode of audio and record mode 8. Description of items of each mode 9. How to connect the device to external devices 10. FM radio receiving function DIASONIC MP3 ExplorerⅡ 1. What is DIASONIC MP3 Explorer Ⅱ? 2. How to install DIASONIC MP3 Explorer Ⅱ 3.
Caution ● Do not drop or apply a strong impact. It may cause a malfunction. ● Be cautious not to put the device near magnetic card like cash card, transportation pass, etc, as it may cause the malfunction of the cards. ● Do not put it into the back pocket. LCD may be damaged. ● Escape from sunlight. Avoid from a heater or a hot place. ● Please use smooth cloth other than liquid solvent (thinner, benzene, etc.) or wet cloth for removing dust.
Function and feature ● As DIASONIC MP3 player is the high performance mobile digital audio player, it plays MP3 and WMA(64Kbps or more), which are compressed digital music files, into various modes, and it is the multi-functional mobile digital audio player of the next generation, allowing high quality voice recording and recording through an external device.
● Various equalizer mode(normal, classic, live, pop, rock) ● Auto power off function ● Control time of back-light on, scroll speed control function ● File deleting function(one, all) ● Firmware upgrade As you can upgrade the function of the device with firmware download function, you can enjoy the latest function.
Part name and LCD display 1) Part name USB JACK Menu REW/MENU/FF Volume control VOL+/VOL- REC Play speed control Mode Play/pause Stop External device Earphone Lock up 2) LCD display Lock up Volume Mode(RADIO/AUDIO/RECORDER) Battery level Repeat EQ REC, Playtime/Volume/Menu set mode
Battery use and its package contents 1. Open battery cover. Open 2. Load 1 ea of LR 03 type battery according to the guide of (+) (-) and close the cover. [Battery: LR 03 or compatible one (Size”AAA” or UM-4)] 3. After turning on power by pushing play/pause button for a few seconds, check the battery level. Battery level is high. Battery level is in middle. Battery level is low. It is time to replace the battery.
If you keep the device in a place for a long period loading the battery in it, the battery may be consumed. 4. Duration of battery Using battery Alkaline battery Size “AAA” LR03 Play through earphone (Vol.: middle ) About 7hours Recording (Record mode:32Kbps) About 7hours 5. Caution for battery ● When you do not use the device for a long time, as there may be a leakage, so, please store it after removing the battery. ● You must use alkaline battery.
How to use ● How to turn on/off power When you push play/pause button for more than 1 second, power is turned on. Then, pushing play/pause button for more than 1 second, power is turned off. If you do not any control after turning on power, power is automatically turned off. ● How to use hold switch When hold switch is set to hold on, switch control won’t be done. When you do not use the device or want to keep the current status, please set the switch to hold on.
each mode with mode button ● Play, pause and stop If you want to play in pause mode, push play/pause button, and if you push play/pause button in play mode, play is paused. If you push play/pause button at this moment, pause is cancelled and play starts again from then on. If you push stop button in play mode, it stops at the starting portion of the file being played.
※ Volume can be controlled with the range of 0~30 steps ※ Volume can be controlled when earphone is plugged, and when you plug out earphone, the device automatically sense “earphone plugged out” and volume is automatically returned to 20 level. ● Intro play This function is to check quickly what kinds of songs or voice files are in memory by playing front portion for just about 10 seconds.
signal from the external device through line in cable. If the line in cable is not plugged to the set, the built in microphone is automatically selected on recording, and if the line in cable is plugged to the set, line in is automatically selected on recording. Recording starts by pushing REC button in stop position. To stop the recording, push stop button, then MP3 file is made in audio mode and DMP file in record mode.
How to use button ● Audio mode (Short means pushing shortly and long more than 1 second) Button Key On stop In play mode In record mode Remain Time Remain Time PAUSE - INTRO play - operatio n MODE SHORT SHORT PALY/PAUSE LONG STOP MENU Converted to REC Mode Current track play starts Current track play starts SHORT - Stop play Stop recording LONG Power off Stop play Stop recording SHORT Menu display Menu display - SHORT Move to next track FF LONG Moving to next track auto incre
※ Ref.: Volume can be controlled only when earphone is plugged.
● FM radio mode Button Key FREQUENCY MODE PRESET MODE Convert to AUDIO Convert to AUDIO MODE MODE STATION mode operation MODE SHORT PALY/PAU SHORT STATION set up - Station set up SE LONG STATION set up - - SHORT - - Undo set up LONG Power off Power off Power off SHORT PRESET mode STOP MENU SHORT FF LONG SHORT REW LONG FM FREQ. fine increasing control FM AUTO SEEK + FM FREQ. fine decreasing control FM AUTO SEEK - FREQ. - mode - Convert to next PRESET CHANNEL UP CH.
How to control menu dial Menu dial moves (1) up and down, and 2 kinds of control are available by pushing it like (2). Please control it according to the guide as below; For searching menu, etc, follow (1), and then (2) for the next control. Thus, the relevant menu is set. (1) Move it up and down. FF (+TRACK) REW (-TRACK) (2) Push it.
Menu table on stop position in audio and record mode ① Menu table on stop position in audio mode : : MENU : : REPEAT 1. NORMAL 2. ONE 3. ALL 4. RANDOM EQ 1. NORMAL 2. CLASSIC 3. LIVE 4. POP 5. ROCK SCROLL 1. 1.0 Sec 2. 0.7 Sec 3. 0.5 Sec 4. 0.3 Sec ID3 TAG 1. OFF 2. ON SYNC 1. SYNC OFF 2. 1 SYNC 3.
BITRATE 1. 64 Kbps 2. 96 Kbps 3. 128 Kbps 4. 192 Kbps 5. 224 Kbps BACKLIT 1. OFF 2. 1 Sec 3. 2 Sec 4. 3 Sec 5. 4 Sec 6. 5 Sec LCD CONT. CONT.: 0~20 LED CTL 1. OFF 2. ON NO ERASE 1. ERS ONE YES NO 2.
NO FORMAT Format YES NO Low format YES EXIT ② Menu table on stop position in record mode : : MENU : : REPEAT 1. NORMAL 2. ONE 3. ALL SYNC 1. SYNC OFF 2. 1 SYNC 3. SYNC ON BITRATE 1. 16 Kbps 2. 32 Kbps 3.
BACKLIT 1. OFF 2. 1 Sec 3. 2 Sec 4. 3 Sec 5. 4 Sec 6. 5 Sec LCD CONT. CONT.: 0~20 LED CTL 1. OFF 2. ON NO ERASE 1. ERS ONE YES NO 2.
Description of items of each mode ◈ Main menu items of audio mode REPEAT EQ SCROLL LCD CONT. LED CTL ID3 TAG ERASE SYNC FORMAT BITRATE BACKLIT EXIT For each menu selection and set up, use menu button, and for main menu move, move for sub menu selection and set up after selecting main menu, use FF and REW button. ☞ Ref.: LCD display on selecting menu :: MENU :: REPEAT < Sub menu of each item > :: MENU :: 1. NORMAL 1) REPEAT: To set repeat play of file 1.
4) ID3 TAG: To set up the method to display the information of the song on LCD. 1. OFF: To display the information of the song only as file name format 2. ON: To display the information of the song as ID3 TAG information when the song having tag information is played 5) SYNC: To set up recording method on external data input recording 1. SYNC OFF: To record all the songs, which are being inputted from external source until pushing stop button from the start of external data input, as 1 file 2.
12) EXIT: To exit from menu ◈ Main menu items of record mode REPEAT ERASE SYNC BITRATE FORMAT EXIT BACKLIT LCD CONT. LED CTL For each menu selection and set up, use menu button, and for main menu move, move for sub menu selection and set up after selecting main menu, use FF and REW button. ☞ Ref: LCD display on selecting menu :: MENU :: BACKLIT < Sub menu of each item > :: MENU :: 3. 3 Sec 1) REPEAT: To set repeat play of file 1.
steps, 16Kbps/32Kbps/ 56Kbps. 4) BACKLIT (BACK LIGHT): To set up back light on/off duration 1. OFF: Back light off even during key operation 2. 1 Sec: 1 SEC of Back light on during key operation 3. 2 Sec: 2 SEC of Back light on during key operation 4. 3 Sec: 3 SEC of Back light on during key operation 5. 4 Sec: 4 SEC of Back light on during key operation 6. 5 Sec: 5 SEC of Back light on during key operation 5) LCD CONT. (LCD CONTRAST) 1.
How to connect the device to external device ● Connecting to external device Using audio cable you can record voice record stored in the device to a cassette, MD, etc. ● How to connect to audio ① In case of recording from external device to the device; Plug in the audio cable to line in input terminal of the device. ② In case of recording from the device to external device; Plug in the audio cable to line in input terminal of the device and mic or input terminal of external device.
by connecting audio cable to the device. On recording, set the volume in middle and do not change it. ● In case of recording to external device Start recording of external device and playing the device simultaneously. (As this timing is depending on the kinds of each device, do pretest for the operation of device.
FM radio receiving function * Having AUTO SEEK function, it is easy to control the device. After selecting radio, if you push FF KEY or REW KEY for about 1 second, it stops at receivable channel. When you use AUTO SEEK function, correct tuning may not be done, when you use fine tuning with REW or FF KEY. ● Radio tuning method ① By pushing mode button, select radio mode. ② LCD displays frequency. Select wanted frequency with FF/REW KEY. ● Channel storing method ① By pushing mode button, select radio mode.
What is DIASONIC MP3 ExplorerⅡ? DIASONIC MP3 ExplorerⅡ send MP3 file of PC to the device or play MP3 file and is the manager program for DIASONIC MP3 player that manages recorded file (DMP) in the device. It has the features as below; ● To download/upload files to MP3 player - MP3, DMP and normal data files ● The same file managing function having the same structure with window search.
How to install DIASONIC MP3 ExplorerⅡ 1. If you load install CD into CD-ROM drive, install program is automatically executed. If not, please execute the execute file, “CD-ROM:₩Setup.exe”. Install is automatically executed and if you just click in order as shown in the pictures as below, install is completed.
4 ○ 5 ○
6 ○ If you click [Finish] and restart PC, install is completed. ☞ To erase DIASONIC MP3 Ⅱ, you can do it by selecting [Start]-[Settings][Control Panel]-[Add/Remove Programs]- [DIASONIC MP3 Ⅱ].
HOW TO INSTALL USB DRIVER 1. If you connect MP3 PLAYER to PC using USB cable enclosed with the set after completion of program install, picture as below is shown and USB driver is automatically installed. ☞ If USB driver is once installed through the procedure above, you need not install it next time as it is automatically recognized. 2.
Configuration of DIASONICMP3ExplorerⅡ Screen of DIASONIC MP3 Ⅱ 1) Description for basic function ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ① To go back to the latest executing position on Search Screen ② To make a new folder (Working directory) on Search File Screen ③ To cut and store a folder or a file into Clip Board ④ To copy and store a folder or a file into Clip Board ⑤ To paste a folder or a file copied or cut by user to designated position ⑥ To delete a folder or a file.
⑧ To change a folder or a file displayed on Search Screen to Big Icon, Small Icon and Detail View ⑨ To send a file or other file of record mode being attached to e-mail 10 To display Help Dialogue Box for the main menu of DIASONIC MP3 II ○ 2) Description for play ① ③ ④ ⑤ ⑥ ⑦ ② ⑧ ⑨ ① To display play time/recording time of selected file ② To display information of selected file ③ To move fast to previous portion of the file currently being played. It moves 1/10 of the length of the file per a click.
original sound, please escape from frequent conversion, and if it inescapable, you better store original file. 4) Description of other management screen ① ③ ② ① Define the file to be displayed. ② Computer information and the contents of the folder are displayed. ③ File management screen: It shows computer information and the sub contents of the folder. ④ It shows the full size of memory of MP3 player. ⑤ It shows the size of memory of MP3 player currently being used.
⑧ Folder management screen: It shows the contents (*.MP3) stored in audio mode of MP3 player. ⑨ Folder management screen: It shows the contents (*.DMP) stored in record mode of MP3 player. ⑩ Folder management screen: It shows the general data stored in MP3 player. ⑪ It moves *.DMP stored in MP3 player to PC (upload). ⑫ It moves files stored in PC to MP3 player (upload). ☞ MP3 file shall not be uploaded in accordance with Copyright.
Sending MP3 file It is very simple. Select MP3 file and then After that, click in file management window above. icon in flash memory management window and then it is completed as below; 1. Select MP3 file to be sent and icon, the file is sent to flash memory as below; 2. When sending is completed, sent file is displayed on flash memory management window.
☞ Only *.MP3 and *.WMA file can be sent to music folder of MP3 player and *.DMP to voice folder. And various files with various kinds of extender can be stored in data folder. ☞ Caution: Do not disconnect USB cable during sending file.
Sending DMP file through PC It is very simple. Select in folder management window above, DMP file to be sent in flash memory management window and click icon in flash memory management window, then it is completed. 1. Select DMP file in flash memory management window and click then the file is sent to designated directory of file management window. 2. When sending is completed, sent file is displayed on file management window.
☞ MP3 file shall not be uploaded in accordance with Copyright. ☞ Caution: Do not disconnect USB cable during sending file.
Erasing MP3 file and DMP file The method to erase MP3 file and DMP file stored in flash memory of MP3 player is the same with the one of erasing method in the searcher. Select one or more file stored flash memory with the left button of mouse and click, when if you select to erase the file, the file is erased from flash memory management window and the file stored flash memory is erased. 1.
2. Confirmation for the erase is checked again. To erase the file, click ‘Yes’. 3. After for a while, the file selected from flash memory is erased ☞ Caution) 1. Deleted file can not be recovered. Be careful for the deletion. 2. Caution: Do not disconnect USB cable during sending file.
Flash memory format As like hard disk formatting, flash memory used in the device is also formatted. If you do format flash memory, all the data stored in memory disappears. 1.Select [file] – [flash memory format] in the menu of DIASONIC MP3 Ⅱ. ☞ Select vacant space in flash memory management screen and click the right button of mouse, then popup menu appears. You can do format in the menu too. 2. Format box appears as below and when you click ‘Yes’, format starts. ☞ Caution) 1.
FirmWare Upgrade It is simple to upgrade FirmWare. Upgrade order is as below; 1. Select [tool] – [FirmWare Upgrade] in the menu of DIASONIC MP3 Ⅱ. 2. When the window as below shows, define pass of the relevant FirmWare Upgrade File(*.hex) and click [open]. 3.
Upgrade proceeds. 4. When FirmWare Upgrade is completed, the dialogue box as below appears. Click ‘Yes’, disconnect USB cable and restart the device, then upgrade is completed.
Specification Classification Item Specification MP3 Model name SMP-200EN Play file format MPEG 32 ~ 320 Kbps 1/2/2.5 layers WMA 64 ~ 192 Kbps Media 128M or 256M File Q’TY 256ea (MP3 + WMA) Channel Stereo Frequency response 20Hz ~ 20KHz Distortion 0.3 ± 0.05 (1KHz 0dB input) Signal to noise ratio 80dB (1KHz 0dB input at use LPF 30KHz) Earphone output 5mW (L) + 5mW(R): 16Ω Max. volume Download speed Max.
256M Audio mode Max. 520min. (64Kbps), 140 Max. min. (224Kbps) Record mode Max. 2120min. (16Kbps), 600 Max. min. (56Kbps) Sound quality Audio 44.1 KHz sampling mode 224Kbps Record 16 mode 16Kbps/32Kbps/56Kbps FM radio 16 KHz 56Kbps 64Kbps KHz ~ sampling mode Frequency range International standard 87.5 ~ 108 MHz FM radio Earphone output (stereo) LCD 5mW (L) + 5mW(R): 16Ω Max. volume Signal to noise ratio 55dB at 1mV 98.
Classification Item Specification FirmWare USB port Support Power: 1.5V LR03 Alkaline battery 1EA (“AAA” size or UM-4) upgrade Power supply DC adaptor (DC 3V 200mA) Battery MP3 play 7Hours (128Kbps, middle volume) Volume Digital volume (30 steps) LED 2 color LED X 3EA Key spec.
A/S When there is a malfunction of the device during use Please contact a dealer or Diasonic. Phone: 82-31-474-0852 / Fax: 82-31-474-0856 / E-mail: diasonic@diasonic.com Warranty Card (rule) ● You can have free service repair in accordance with the rule as below, When there is a malfunction of the device during use within validity, please apply for repair service to the service center or the dealer with this warranty card.
(Caution on shipping) When shipping, please care the items below; 1. If warranty card is within the validity, please envelop it into the product box. 2. Please do care to protect the product from any damage arising from shipping by wrapping the product with shock-absorbing material. Postage, wrapping cost, etc, are on customer. 3. To prohibit loss, please use registered mail.
WARRANTY CARD Product name: MP3 PLAYER MODEL: DMP-200EN Validity: 1year Purchasing date: Name Purchaser Address Phone Name Dealer Address Phone ● For any malfunction of the device, please contact a dealer or Diasonic. ● Compensation rule for exchange, repair (charge/free), refund and part exchange is in accordance with that of the Consumer Protection Law. DIASONIC Co., Ltd.