PORTABLE DIGITAL AUDIO PLAYER MODEL : DMP-100/DMP-100R INSTRUCTION MANUAL Thank you for purchasing PORTABLE DIGITAL AUDIO P L AYER from DIASONIC TECHNOLOGY Co. Please carefully read the Instruction manual for safe use of the product. We recommend you to keep this instruction manual for future reference.
INFORMATION TO THE USER WARNING Changes or modifications not expressly approved by the manufacturer could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations.
COPYRIGHT DIASONIC TECHNOLOGY Co. has all the copyrights for this instruction manual. It is against the copyright law to make unauthorized copies, translate and publish material without prior authorization from DIASONIC TECHNOLOGY Co. All the information written in this instruction manual was produced with our company's careful caution, but they can be changed without any prior notification.
CONTENTS 1. DMP-100/R SERIES 1) Notes for using ---------------------------------------------------------------------3 2) About DMP-100/R SERIES ------------------------------------------------ 4 3) Function and Feature ------------------------------------------------------ 5 4) Name of each part and LCD display ---------------------------------------6 5) Use of battery and component of package.
Before use (notes for using) - Do not drop or give a hard impact. It could cause malfunction. - Do not use or place it at following places. - Highly temperate area(above 60°C) - Under direct light beam or anywhere close to heater - Car with closed windows. (Especially summer) - Where lots of moisture exist ex) bathroom. - Where lots of electricity occurs - If too much force is pressed on LCD Display window it becomes the reason of malfunction.
About DMP-100/R SERIES DMP-100/R series are Multi-Function Next-Generation Portable Digital Audio Player that integrated technology and quality from DIASONIC TECHNOLOGY CO. It's a high performance portable digital audio player which plays digitally compressed audio file MP3 and WMA file in various ways. It can record high-quality voice and also has function to record by connecting it to exterior devices and listening and recording of FM radio broadcast is also possible.
Function and Feature - Adopted USB interface for convenient computer storage. - Plays MP3 file, voice record, receiving and recording of FM radio broadcast. - Graphic LCD with back-light (indicates file title, play time, battery condition, etc) - Hold function to prevent actions from miss-pressed buttons. -Repeat play function (normal, 1 track, all, random, section repeat, album repeat) - Supports Korean, English, Japanese, Chinese. - Play/ intro play/stop/ power off/record.
Name of each part and LCD Display PLAY/STOP EARPHONE JACK LINE IN USB JACK REW/MENU/FF VOL+ / VOLREC/STOP RADIO HOLD ON/OFF HOLD VOL REPEAT EQ REC TIME/PLAY TIME/EL/ VOLUME -6- BATTERY REC/PLAY/USB DISK
Use of Battery and Component of Package 1. Open the battery cover. OPEN 2. Insert 1 LR 03 type battery to product matching the (+) (-)polar signs and close the cover. [Battery : LR 03 or equal product (SIZE"AAA" or UM-4) 3. Press play/stop button to check the battery. Battery full Consumed 1/3 of the Battery . Consumed 2/3 of battery. Battery needs exchange. o Notice If LCD doesn't appear after new battery has been inserted, immediately check the polar signs of battery.
4. Use time of battery Battery used Alkaline battery SIZE"AAA" LR-03 When recording When played with earphone ( volume : medium ) Approx. 7hour Approx. 7hour 5. Attention when using battery - Do not use with mixing other types of batteries. - Take the battery out if it's not going to be used for long period of time. - When using rechargeable battery, use it properly after reading the instruction manual. 6.
Basic use - Power ON/OFF Press play button for over 3seconds to turn the power on and LCD display screen will appear like picture on the side. While power is on, press play button again for over 1second to turn the power off. If none of the buttons are pressed over 1minute power will turn off automatically. - Using hold switch If the hold switch is upward switch will not be operated. Keep the switch upward when it's not being used or if you wish to maintain the recording condition.
- Conversing Mode DMP-100/R SERIES has MP3 mode, voice record mode, and FM radio mode. When the player is at stop, press menu button and menu will appear on LCD screen. Then, use FF or REW button to select between MP3 (audio) and voice record mode (record). To choose FM radio mode, press radio button when at stop and it will convert to FM radio mode. - PLAY, STOP Press play button to play music, while music is playing press play button again then it will stop at the current playing position.
- Adjust Volume Press VOLUME + and VOLUME - button to adjust volume. Hold on the button for continuous adjustment. o Volume can be adjust from level 0~30 o Volume can only be adjusted with plugged in earphone. When earphone is unplugged it will auto-detect "earphone unplugged" and automatically adjust volume to level 20. - Section Repeat DMP-100/R has a 'selected section-repeated function'.
Use of Buttons - MP3 Mode (SHORT means pressing it for short time and, LONG means more than 1second) Button PLAY/STOP FF REW SHORT LONG SHORT LONG When Stopped Plays Current Track Power off Switch to Next Track Auto Increase of Next Track SHORT Switch to Previous Track LONG Auto decrease of previous Track Menu Volume Up Volume Down Key Movement MENU VOLUME + VOLUME REC RADIO While Playing Stops Current Track Intro scan Play the Next Track Current Track Fast Forward After 5sec, moves to beginning of
- FM Radio Mode Button Key Movement FRQUENCY MODE PRESET MODE CONFIGURE STATION Configures STATION SHORT Configures STATION LONG Power Off Power Off Power Off SHORT Increase FM frequency minutely Switch to Next Preset Switch to Next Preset FF LONG FM frequency AUTO SEEK+ SHORT Decrease FM frequency minutelySwitch to Previous PresetSwitch to Previous Preset REW LONG FM frequency AUTO SEEK+ MENU Disable Preset Mode Enable Preset Mode Enable Preset Mode VOLUME + Volume Up Volume Up Volume Up VOLUME Volume
Configuring Menu Dial Menu dial has 2ways to operate (1) move up and down, (2) push and move. Operate correctly by instructions from manual. Selecting menu is done by (1) move up and down then pressing (2). In this way, it will setup a selected part of the menu. (2) press. (1) moves up and down.
Configuring Menu from MP3/VOICE property when stopped 1. Menu from MP3 property when stopped MENU MODE AUDIO RECORD REPEAT NORMAL ONE ALL RANDOM EQ NORMAL CLASSIC LIVE POP o When menu button is pressed display screen displays last configured menu. At this moment, use FF or REW button to select the desired menu, then press menu key to configure the details involved in that menu. ROCK SCROLL 0.3SEC 0.5SEC 0.7SEC 0.9SEC 1.
2. Menu from RECORD property when stopped MENU MODE AUDIO RECORD REPEAT NORMAL ONE ALL NO ERASE ONE YES ALL NO YES DISPLAY NORMAL REMAIN BACKLIT OSEC 1SEC 2SEC 3SEC 4SEC 5SEC o When menu button is pressed display screen displays last configured menu. At this moment, use FF or REW button to select the desired menu, then press menu key to configure the details involved in that menu.
Menu Table - MP3 Mode MODE REPEAT EQ SCROLL ERASE DISPLAY BACKLIT o Use Menu button to select and configure each menu, and after moving and selecting upper menu, use FF and REW button to move through lower Menu. 1) MODE MODE AUDIO RECORD AUDIO : Convert to MP3 or WMA FILE playable mode. RECORD : Convert Line input and voice record mode. o Can't configure Menu when the players being played. 2) REPEAT REPEAT NORMAL ONE ALL RANDOM NORMAL : Stop after playing all music in order.
4) SCROLL SCROLL 0.3SEC 0.5SEC 0.7SEC 0.9SEC 1.0SEC Control the speed of music information scrolling on display window between 0.3second through 1.0second. 5) ERASE ERASE ONE ALL ONE : Delete one song displayed on LCD window. ALL : Delete all songs in MP3 mode. 6) DISPLAY DISPLAY NORMAL REMAIN TITLE NORMAL : Allow music information to scroll through LCD display once and count elapsed time from beginning.
2) REPEAT REPEAT NORMAL ONE ALL NORMAL: Stop all record files after playing it in order. ONE: Repeat selected record file continuously. ALL: Continuously repeats all record files in order. ERASE 3) ERASE ONE ALL ONE: Delete record file displayed on LCD window before the erase menu. ALL: Delete all record files in voice mode. o Can't erase when the music is being played. 4) DISPLAY DISPLAY NORMAL REMAIN NORMAL: Counts elapsed time of record file displayed on LCD.
Recording from Voice Record Property - Recording o Please select RECORD MODE to record on menu mode and can't record on MP3 mode. 1) Face the microphone sound source and press REC/STOP button. It will start recording with, record number, record time, and progress displayed on display screen. 2) If you wish to stop recording, press the REC/STOP button one more time. o It is impossible to stop recording within 5seconds from start of recording.
- Separating files while recording Separating file is possible through need of user while recording. Use FF KEY to continue recording at next index and it has made it easy to determine the recorded information. o Notice -. Do not take the battery out while recording. Recorded information can be erased or it won't function properly. Always take the battery out from stop position. -. If memory doesn't have enough space it won't start recording. "MEMORY FULL" will be indicated when recording time is at full.
Deleting o Deleting is possible only from a stop position. (Deleting is same between MP3 and Voice property) - Deleting each massage 1) Use FF or REW button to select massage to be deleted. Press menu and use FF or REW button to select ERASE then choose 'one' After that, select 'yes' then message will be deleted with 'erasing' displayed on the screen. o LCD message number will be pulled forward when messages get deleted. o Notice: Deleted messages can't be recovered.
Connecting it to Exterior Device - Connecting it to Exterior Device It's possible to record recorded voices from this product to exterior device, such as cassette or MD using audio cable. - Connect to Audio 1) When recording exterior device to DMP-100/R SERIES. Connect additional audio cables to exterior microphone terminal and earphone terminal from exterior device or the output terminal of DMP-100/R SERIES.
o Notice * When connecting it to exterior device turn the power off. * When connecting it to exterior device please carefully read and understand the manual before the connection. - Record from Exterior Device When recording from exterior device lower the volume of the exterior device and connect audio cable to the product. Adjust the volume of the product to mid-position and do not change it during the record procedure.
FM Radio Receiving Function o Reference : Works only on FM radio applied model. o It's convenient to listen to broadcast with auto seek function. If FF key or REW key is pressed over 0.5sec after setting to radio, it stops at a receiving frequency. Auto seek function will not give you precise broadcast frequency. At this situation, use REW or FF key for precise control. - Configuring radio channel 1) Select radio mode by pressing radio button. 2) Frequency will appear on LCD.
What is Music Bank? Music Bank is a program which plays MP3 files from computer to DMP-100/R SERIES, it's also a managing program that manages recorded voice or FM radio files (DMF) from DMP-100/R SERIES and has following features.
Connecting DMP-100/R SERIES and setting up Music Bank (1) Insert DMP-100/R SERIES setup CD to CD-ROM drive and it will run automatically. If Auto-run doesn't work execute setup file "CDROM:\setup.exe" or "CD-ROM:\Music Bank\setup.exe". Setup will progress automatically, once setup is completed Music Bank will be registered to "DIASONIC" in start program. (2) Using USB Cable connect USB port terminal from DMP-100/R SERIES to USB port at PC.
(6) Searched USB driver file and click on ' NEXT ' button. (7) Click on ' NEXT ' button to finish wizard. (8) Once USB drive setup is completed, check for setup progress from device manager at My Computer. * Verify if USB is installed right, or the cable is connected properly. If DMP-100/R SERIES isn't found after launching Music Bank.
Composition of Music Bank Appearance of Music Bank Play Manage section File Manage section File manage window Folder manage window Flash Memory Manage section Flash memory mange window Transfer list window (1) Playing MP3, WAV, CD and DMF Double click on MP3, WAV, Audio CD Track and DMF file on file manage window or use drag and drop to playlist for instant play. Also, you can select file then press play.
(2) Managing DMF file and MP3 file File managing part of Music Bank is very similar to Window Explorer. Left part of the window shows the hard disk and CD-ROM drive installed in system with it's inside folders. Right part of the window shows various files inside folders..
Buttons Button Function Particular Information Prints file list in flash memory. Print Re-reads the information on flash screen. Choose the file stored in flash memory, then press this button to Delete delete the file. Choose the files to be move to flash memory for file manage window, then Transfer to flash click this button to transfer(download) memory selected file to flash memory. Reload It is used to move file to computer from flash memory.
Spectrum Screen and Sound Effect Music Bank shows fascinating spectrum screen. Basic setting is same as picture at bottom but, screen changes in various ways by clicking left button of mouse. - Spectrum screen of Music Bank 1 This changing spectrum screen can be used by users taste. Following pictures are example of some features.
Transferring MP3 File It's very simple to transfer MP3 file to DMP-100/R SERIES. First select MP3 file from file manage window then choose Folder manage window . And, use drag and drop to flash memory window, or press 'Download to flash memory' icon or same operation. Transfer MP3 files by following method. 1) Select MP3 files from file manage window. 2) Select from folder manage window, then click 'Download to flash memory'.
Transferring DMF Files to Computer It's very simple to send DMF files from DMP-100/R SERIES to computer. Select V from previously mentioned folder manage window and choose DMF file from flash memory manage window, then click 'upload to computer' icon from flash memory manage window. Transfer DMF files to computer by following method. 1) Choose V from folder manage window and select DMF files to transfer from flash memory manage window to computer. 2) Click “upload to computer”.
- The way to transfer DMF file to DMP-100/R SERIES is choose DMF files then V select from folder manage window then, select icon. Rest of procedure is same as transferring MP3 file to DMP100/R SERIES. Through page 33), 34). You can easily transfer DMF or MP3 files in flash memory. Once the transfer is over, status bar at low part of Music Bank shows size of the transferred file and use of memory. +To transfer file at once use button or drag and drop to keep files in transfer list.
Deleting Mp3 File and DMF File Deleting MP3 or DMF files stored in flash memory of DMP-100/R SERIES is same as deleting files in explorer. Select one of the stored file from flash memory by clicking left mouse button, then press 'delete' button from tools at flash memory manage section. Through following steps, you can delete MP3 and DMF files from flash memory. 1) Select file to be deleted, then from click on 'delete' tools. DMF File button from MP3 File 2) Ask to confirm 'delete'. Select 'Yes'.
Resetting Flash Memory Just like formatting hard disk on computer flash memory used in DMP-100/R SERIES can be reset (format). All the data from flash memory will be lost when formatted. 1) Select ' file-format flash memory' from menu Music Bank. * Click right mouse button from empty spot at flash memory for pop-up menu. Formatting flash from this menu is possible.
Directly Transferring Audio CD Music to DMP-100/R SERIES(Option) Music Bank allows user to easily convert audio CD to MP3 files, and transfer converted file to flash memory of DMP-100/R SERIES. When converting audio CD to MP3 it is stored as MP3 without passing the step of changing into WAV file, so the converting speed is very fast. All this operation is done just by pressing MP3 convert button from music bank.
(2) Decide place to store MP3 file and the title of the file. (3) It's converting audio CD to MP3 file. * Configure MP3 encoder transfer rate(Bitrate), channel, sound quality through selecting 'Option-MP3 Encoder Opition' from music bank. * When you press button, you can receive information such as singer, title of the song and etc.. from internet. To use CDDB, connection to internet is needed, but cause of network condition or use of proxy server might give bad connection.
(4) All the steps are completed. Press 'Close' to close MP3 conversion window. (5) When it completes converting MP3 file it automatically open the folder of where MP3 made it to at Music Bank. Now, select those files and press ‘Download to flash memory’ to start transferring. Download to flash memory * When audio CD is selected from file manage section, you can directly select tracks. Select audio CD to transfer to DMP-100/R SERIES.
(6) MP3 files made from audio CD are being transfer to flash memory of DMP-100/R SERIES. (7) Completed transferring MP3 files made from audio CD to flash memory of DMP-100/R SERIES. Now, DMP-100/R SERIES will play the music. * Use ‘MP3 Bitrate conversion’ to change selected file to MP3 encoder bitrate files.
Manage files using music bank It's convenient to manage MP3 and DMF files by using Music Bank. Make folder at a position you want, copy and save frequently listened MP3 and DMF files. And, useless MP3 and DMF files can be easily deleted by using delete button. 1) Select file, then click 'copy' from tool menu. 2) Move to a folder desire to copy files to, then use 'paste' tool menu. 3) Files are copied and saved at designated folder.
Mail Manager - Play/Record DMF file - Voice mail function : auto appending at mail program - Creates self play function : voice file+player - Edit DMF file : delete front and rear, middle insert record function - 16various voice effect Mail Manager is a program that plays self created voice file DMF from DMP100/R SERIES. It can send voice mail or record and keep conference meeting and lectures. Mail Manager send and receive voice mail through e-mail or network without typing or writing letters.
(2) Convenient use method Auto-append of voice mail to mail program. - Press 'record' button - Say the message - Press 'Stop' button - Finally press 'send' button and Sending Voice mail:Voice file+Player ( .EXE)(In case that the receiver doesn't have MailManger mail window with voice mail attached will appear. To do a proper recording or playing volume must be adjusted at appropriate level.
(5) Drag and Drop If use drag and drop function of mail manager attaching voice mail to other mail program or network emulator not supported by mail manager will be possible. Press left button of mouse on drag and drop to add voice mail to other program. Now, Use two drags and drop icon, choose between voice file+player. voice file+player(.EXE).
(8) Shorten Keys Support of shorten keys, control of mail manager is possible while using other program.
GENERAL SPECIFICATIONS(DMP-100/R) Model File type Bitrate Signal vs noise rate Magnifications Frequency respond earphone Play mode Search play Search Repeat Download speed EL/ BACK LIGHT Memory AUDIO IN JACK Key control Remote control Network System requirement OS PC interface Sound card Display Earphone USB Track Equalizer LCD 128x16DOT Count Repeat Power Battery period Play MP3 DMP-100/R MPEG 1/2 LAYER 3, WMA(Over 64kbit) 32Kbps~320Kbps(MPEG 1/2 LAYER 3) 85db (1KHz input 0db at USE LPF 30KHz) 0.3%+/-0.
Product Warranty - Request A/S When breakdown of something occurs, stop using of the product and request for After Service from sales market or Diasonic Technology Co. Company Representative: 82-31-474-0852 - Warranty(warrant regulation) We promise a fare free repair service by information mention in this warranty card. If breakdown occurs during warranty period bring product and the warranty card and visit sales market or our company.
6) Breakdown or damage by overflow from battery. 7) When accessories(battery) need replacement. 4. This warranty card is only valid for service in Korea. (Request when mailing) Please beware of following when mailing. 1. Please enclose warranty card with the product when mailing during warranty period. Please wrap in shock absorb material and put in box, mailing fee, wrapping fee, and any damage caused during mailing will be charge to a customer. 2. To prevent loss, please use registered mail.
WARRANTY CARD Product : MP3 MODEL : DMP-100/R Warranty period : 1year Purchased date : / / Name Purchaser Address Phone Name Address Seller Phone - Please refer to sales market of Diasonic Technology Co. for any information or breakdown on the product. - Exchange, repair(charge. free), refund and parts keeping period is depended on regulation of customer protection - Any questions or if you want to know more information about the product please contact Diasonic Technology Co. Diasonic Technology Co.