DIGITAL Voice RECORDER & AUDIO PLAYER FM Radio DDR-6000R User Manual 그림 추가 (제품 빗면 그림) Thank you for purchasing Diasonic DDR-6000R, a digital voice recorder and audio player. manual before using the product. Please read this It is recommended to keep this manual near the product for convenient use.
INFORMATION TO THE USER Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
with clean water and see the doctor. ● Do not soak the device in water or leave it in a humid place. ● Contents of the user manual are subject to change without prior notice for performance improvement. ● Using the earphones for a long time may compromise user’s hearing ability. Copyrights ● DIASONIC Technology has all copyrights of this user manual.
Table of Contents -4-
Safety Notes ● Do not store the device in any place with following conditions: - High temperature (60℃ or higher) - Exposure to the direct sun rays or a heating device - Inside the car with closed windows (especially, in the summer) - Humid place such as the bathroom ● When removing dust, use soft cloth. Do not use liquid agent (such as thinner or benzene) or wet cloth. ● Do not place a debit card or a bus pass near the speakers. The magnetic interference may occur, which will damage the card.
Features and Characteristics Diasonic Digital Voice Recorder is a next-generation portable digital recorder equipped with the state-of-the-art technologies. With this digital voice recorder, the user can record and play voice with the best quality in various recording ways – SHQ, HQ, and SP. The device supports various playing methods (including speakers and earphones) as well as diverse file formats including MP3 and WMA. The device can also receive and record FM radio broadcasting.
Parts and Configuration Main Body Speaker Earphone Jack MIC Line-in Jack Menu Button Play Button Erase Button USB Jack Hold Switch Battery Cover LCD LCD FM FREQUENCE Mode Battery Status Folder Index REC Quality Play Time -7-
Components Stereo Earphones / User Manual / WIN98SE Driver Installation CD / USB Cable / Hand Grip / Antenna / External Microphones / Battery (1EA) / External Device Connection Cable / Telephone Cable / DC Adapter Battery Replacement ① Open the battery cover by turning it counterclockwise. ② Insert LR03-type AAA battery in the right direction in the battery compartment, and close the cover by turning it clockwise.
Battery Hours (at Normal Temperature) Earphones Battery Recording (Volume: Middle) Speaker Playing Earphones Playing (Volume: Middle) (Volume: Middle) Alkaline Battery Approximately 00 Approximately 00 Approximately 00 Size ‘AAA’ LR03 hours hours hours Notes ● Do not mix different types of the batteries. ● In case of not operating the device for a long time, remove the battery from the body. Otherwise, the battery may be naturally consumed. ● Use only Alkaline batteries.
Basic Operation Turning On/Off Power ● Turning On the Power Press Play button for 0 seconds to turn on the power. ● Turning Off the Power Press Play button for 0 seconds to turn on the power. Hold Switch Before using the player, check whether the hold switch is disabled. ● Hold Switch Enabled Move the hold switch to On position. When the hold switch is already enabled, the switch will not move to On direction. ● Hold Switch Disabled Move the hold switch to Off position.
Recording With the voice recorder, the user can record not only voice but also other various music sources from cassette, MD, MP3 player, audio, telephone, mobile phone, and FM radio. ● Various Input The user can record audio data not only from the internal microphone but also from external microphones and external devices connected through the line-in port. microphone or line in the voice menu. In case of line-in connection, select the external (See the Menu Setup.
Voice Recording With the voice recorder, the user can record conversations and lectures. under Voice folder and the file name format is MIC001_SHQ.MP3. The recorded files are stored By accessing the PC, the user can check the files. ① Select the DIR in the Voice menu, and select the folder. (See the Menu Setup.) ② Select R_QTY in the Voice menu and the recording quality. (See the Menu Setup.) ③ Press the Recording button.
● Recording from External Device By connecting an external device through the Line-in cable, the user can record sound sources from the cassette, MD, MP3 player, and the stereo set. Set the volume of the external device properly before starting recording. ① Connect the external microphones to the Line-in port. ② Change S_SEL in the Voice menu into Line. (See the Menu Setup.) ③ Select R_QTY in the Voice menu and the recording quality. (See the Menu Setup.) ④ Press the Recording button.
● Recording from Mobile Phone (Option) The user can record the mobile phone conversations through the earphones. ① Connect the mobile phone and the voice recorder through the Line-in port and the earphone jack of the mobile phone. ② Change S_SEL into E_MIC in the Voice menu. (See the Menu Setup.) ③ Select MO as the external microphone type. (See the Menu Setup.) ④ Select R_QTY in the Voice menu and the voice quality. (See the Menu Setup.) ⑤ Press the Recording button to start recording.
Playing After entering Voice or Music mode, the user can search files to play by pressing the Play button right and left. The user can play the file in various modes at various quality by selecting Repeat and EQ in the Menu Setup. ※ The Voice mode does not support EQ feature. Voice Playing ① Select the Voice mode. ② Select DIR in the Voice menu, and go to the wanted folder. (See the Menu Setup.) ③ Select the file by pressing the Play button right and left, and press the Play button again.
Playing Next File and Fast Forwarding Button Key Stop Playing - Selects the next file. Selects and plays the next file. -- Automatically adds next files to select. Fast forwards the current file. Operation Goes back to the beginning of the file 5 seconds after the playing starts. - Selects the previous file. Selects and plays the previous file within 5 seconds after the playing starts. -- Automatically reduces previous files to Rewinds the current file. select.
Storing Auto Preset Channels The user can have maximum 20 FM frequencies automatically searched and stored. To use this feature, press the Erase button long. Preset Channel ① Select the Preset mode by pressing the Play button. ② By moving the Play button right and left, the user can listen to the stored channels. Deleting Preset Channels ① Select the preset channel by moving the Play button right and left in the Preset mode. ② Press the Erase button. Then, “DEL” will be displayed on the LCD.
Deleting a Folder The user can delete an entire folder. ① Select the folder to delete, and press the Erase button long. ② “Erase” will be displayed on the LCD. ③ Press the Erase button again to delete the folder. If the user presses other buttons, the folder will not be deleted. Deleting All Files The user can delete all files stored in the voice recorder. ① Select the FMT (format) in the menu, and press the Play button. ② Select “Yes” and press the Play button. ③ Then, all files will be deleted.
Menu Setup By setting up the menus, the user can use various features more efficiently. To set up menus, press the Menu button long. Menu Selection ① Move the Play button up and down and select a menu item. ② Press the Play button to apply the selected menu item. ③ Press the Menu button to select a higher menu or to exit the Menu mode.
Menu Band (FM Band Setting) The user can select one of the following FM bands: USA: 87.5MHz~108.0MHz (100KHz STEP) JRP: 76.0MHz~108.0MHz (100KHz STEP) EUP: 87.50MHz~108.00MHz (50KHz STEP) R_QTY (Recording Quality Setting) When recording voice or FM radio broadcasting or through the Line-in cable, the user can set the bit rate: SHQ: High HQ: Middle SP: Low FMT (Folder Format) The user can delete all data in the folder. Before using this feature, check the battery is full.
REP (Reception Method Setting) The user can play the folders in the same folder in the following ways: NOR: To play the files once in order. ONE: To repeat the current file. ALL: To continue playing all files in order. SHUFF: To randomly play all files in the folder. S_SEL (Input Setting) The user can set the external device through the Line-in port. Line: To use the MD, cassette, or MP3 player as the sound source. E-MIC: To select the microphone type – Mono or Stereo.
S_DEF (Default Menu Values Setting) The user can call the factory menu setup. Yes: To call the factory menu setup. No: Not to call the factory menu setup. F_INF (Version Information) The user can view the FW version. V_100: Version information R_027: Release information M_INF (Folder Information) The user can check the total folder size and the currently used folder size. As some operations of the voice recorder require folder data, the folder capacity and the total capacity may differ.
PC Connection The user can connect the voice recorder to the PC through the provided USB cable and use the folders of the voice recorder as a USB driver. (However, in case of Windows 98SE, a separate USB driver is needed.) The voice recorder is equipped with the USB mass storage feature and can be used as a hard drive. The user can connect the voice recorder to the PC in which Windows ME, 2000, or XP, not Windows 98, is installed by plug-and-play method without installing special software.
③ After the PC is rebooted, connect the voice recorder to the PC using the USB cable. Select “Search Driver (Recommended) in the Hardware Installation Wizard, and click on the [Next] button. ④ When “Unknown Device” is displayed, click on the “Next” button. ⑤ Select “Location” field and click on [Browse] button. ⑥ When the [Browse] button appears, select the directory (Win98SE Driver) downloaded from the web site and click on [OK] button. ⑦ When the device name is displayed, click on the [Next] button.
⑨ Now, the device has been installed. ⑩ Check the installation state. [My Computer] - [Control Panel] - [System] - [Device Manager] - [Hard Disk Controller] Disconnecting the USB Port Before removing the voice recorder, disconnect the cable first. Otherwise, the data may be lost or damaged. ① Close all files. When a file or folder is open, the voice recorder will not be properly removed from the PC. ② Left-click on the icon ( ) displayed on the lower-right corner of the screen.
Folder and File Management When the voice recorder is connected to the PC, the recorder will be recognized as a portable disk. In the portable disk drive, FM, Line, Music, and Voice folders are created. The user can create folders and write, read, and delete files in the voice recorder like in the portable hard disk. The user can also format the portable disk. 수정해야함 Music Folder The user can create folders and manage music files. The user can copy the entire folder with belonging files.
FM Folder Under the FM Radio folder, the FM radio broadcasting recorded files are stored. Maximum 00 recorded files can be created in order. FM001_SHQ_1077.MP3 Mode Recording No. Recording Quality Recording Frequency Voice Folder Under the Voice folder, the voice recorded files are stored. order. Total 00 files can be stored in a single file from Voice_1 to Voice_8. MIC001_SHQ.MP3 Mode Maximum 000 recorded files can be created in Recording No.
Firmware Upgrade By upgrading the firmware, the user can improve performance of the voice recorder and correct errors in the recorder. * The user can download free firmware upgrade files from the web site of Diasonic Technology. Ater downloading the upgrade file, copy the file to the Root directory of the voice recorded connected to the PC. Disconnect the recorder, and turn off the power. Turn on the power. Then, the firmware will be upgrade.
Troubleshooting When a breakdown is suspected, please check the following: Symptom The power is off. The player suddenly stops. The adapter does not function. Things to Check Check if the hold switch is in On position. Move the hold switch to Off position. Check the battery state. Replace the battery. Check the insertion of the battery. Check the polarity of the battery. Remove the battery. Insert the battery again.
The speakers do not Check whether the earphones are generate sound. connected. The earphones do not Check whether the earphones are generate sound. connected. Disconnect the earphones. Connect the earphones. The FM radio reception is poor in the The device and the earphones The player does not frequency shadow areas, inside the function as antennas. receive radio broadcasting. building, in the subway, and on a moving device and earphones for better vehicle. reception.
Specifications Model DDR-6000R Mode MP3 Format 32Kbps / 16Kbps FILE Voice: 99ea/ MP3 FM Record Stereo (87.5MHz~108MHz) Mic Built-in Mic / Line (external Mic) S/N 45db (50dB input 1KHz, speaker Output 200mW)75KHz Distortion 3%±0.2 (dB input 1KHz, speaker Output 100mW: HQ mode) Freq. Response 400Hz~3.2KHz (-6dB) Output Power Max 8mW (Stereo earphone 16ohm) S/N 45dB at 1mv 98.1MHz FM Distortion 0.8%(max) at 1mv 98.1MHz ∆f=22.5KHz Radio Freq, Response 350Hz±30Hz, 3KHz±0.25KHz (150Hz~2.
Product Warranty ● Repair Service When a breakdown occurs, stop using the product and contact the sales agency or the service center of DIASONIC Technology at 82-031-474-0852. ● Warranty (Service Policy) Free repair services will be provided in compliance with the free repair policy of DIASONIC Technology. If a breakdown occurs during the warranty period, bring the product with the warranty card to the sales agency or the service center of DIASONIC Technology.
Warranty Card Product: Voice Recorder Model: DDR-6000 Warranty Period: One Year Purchase Date: ____ _______, _________ Name Purchaser Address Telephone Name Seller Address Telephone ● Please contact the sales agency or customer center of DIASONIC Technology Co., Ltd. for breakdown of the product. ● Exchange, (charged or free) repair services, refund, and part-keeping periods comply with regulations of the customer protection act.