User Manual

ManualsBrandsDiamond Multimedia ManualsAV Receivers & AmplifiersDiamond Wireless HDMI Extender Kit, TV Transmitter & Receiver for HD 1080p, Stream Video Content from: Laptops, PC, Cable Box, Satellite Box, Blu-ray, DVD, PS3, PS4, Xbox 360, Xbox One (VS100)

Important Safety Notice!

Please read the below safety instructions carefully before installation and

operation:

1. Please pay attention to all the warnings and suggestions for your VS100.

2. Do not expose this unit to rain, moisture or liquid.

3. Do not insert any foreign materials or objects into the device.

4. To avoid electrical shock do not attempt to repair the device or open the

enclosure.

5. To avoid over heating do not place any objects that may cover or

obstruct the ventilation holes.

6. Shut off power and make sure environment is safe before the installation.

7. To avoid cable damage do not plug-in/out the cables while in use

8. Use DC5V/2A only. Make sure the specification matched if using 3

party DC adapters.

Introduction

The Diamond VS100, allows HD video transmission via HDMI up to 150

wirelessly. Supports anti-interference technology by using 5GHz

operational frequency and supports point to point connection. With IR

support, you can remotely control your source from any remote location.

The Diamond VS100 is great solution for conference room meetings,

home entertainment, multi-media educational applications and works

with any HDMI video source.

Note:

1 ) Transmission distance can vary due to the type of environment.

2 ) Brick walls or glass will shorten the signal cover range or cause

signal loss.

Features

1. Support HDMI1.3, compatible with HDCP1.2.

2. Maximum resolution up to 1080p full HD.

3. Features strong anti-interference (5GHz operation frequency).

4. Supports point to point wireless configuration.

5. IR transmitter/receiver 20-60KHz frequency.

6. 150 feet long range transmission distance.

7. Plug and play, easy installation.

Package Contents

HDMI Extender TX

sender x1pcs

HDMI Extender RX

receiver x1pcs

DC5V/2A power

adapter x1pcs

USB Cable

x1pcs

User manual x1pcs

IR receiver extension

cable x1pcs

IR blaster extension

cable x1pcs

Installation Requirement

1. HDMI source device (DVD, Game Console, Set top box, PC etc).

2. HDMI display device like SDTV, HDTV, and projector with HDMI port.

Panel Description

1. HDMI Extender TX sender

【NOTE】This device can be powered from the HDMI source device (which

with USB port) directly. However, when the transmission/connection is not

stable, or the output is not fluent, please connect a 5V plug (with USB port)

to the USB cable for power supply.

2. HDMI extender RX receiver

Connection

Summary of content (2 pages)

PAGE 1
Important Safety Notice! Features Installation Requirement Please read the below safety instructions carefully before installation and 1. Support HDMI1.3, compatible with HDCP1.2. 1. HDMI source device (DVD, Game Console, Set top box, PC etc). operation: 2. Maximum resolution up to 1080p full HD. 2. HDMI display device like SDTV, HDTV, and projector with HDMI port. 1. Please pay attention to all the warnings and suggestions for your VS100. 3.
PAGE 2
Connection instruction: Q: Display is not fluent or stable 1) Connect HDMI input to HDMI source device and connect IR blaster A: 1) Please move the position of sender (TX) and receiver (RX) and make extension cable to IR OUT interface of the sender (TX). 2) Connect HDMI output to HDMI display device and connect IR receiver extension cable to IR IN interface. 3) Power on the device (power led lights) and it works. sure the device is within the signal coverage range.