JDMWH200AA User’s Manual WHDI Video Transceiver System User’s Manual
Contents 1 2 IMPORTANT INFORMATION ...............................................................................................2 INTRODUCTION ....................................................................................................................4 2.1 Overview.......................................................................................................................4 2.2 Main features..................................................................................................
1 IMPORTANT INFORMATION Take time to read this user manual before using WHDI Stick (Transmitter) and Receiver. It contains important information and instructions regarding operating your wireless HD receiver and transmitter. DFINE Technology Co., Ltd.
the power switch. ●When the WHDI transceiver is not used, disconnect the power switch to prevent electric shock or fire. WARNING: ●This product should not be exposed to dripping or splashing. Objects filled with liquids, such as vases, should not be placed on the product. ●Put the receiver/transmitter in a property ventilated area, away from direct sunlight or any source of heat. ●Water Exposure: To reduce the risk of fire or electric shock, do not expose the receiver/transmitter to rain or moisture.
TRADEMARK INFORMATION z z HDMI, the HDMI Logo and High-Definition Multimedia Interface are registered trademarks of HDMI Licensing LLC in America or other countries and regions. WHDI, the WHDI Logo and Wireless Home Digital Interface are registered trademarks of WHDI Licensing LLC in America or other countries and regions. SPECIAL NOTICE: Never use this product nearby an aircraft or medical facility. It will cause an interference and wrong effect on the operation.
2.3 Packing Content Please check whether the following items are present in the package. If any items was missed or damaged, please call your distributor. Main unit: WHDI Stick and Receiver Accessories: 1 USB A-Mini USB lead, 1 User manual, 1 Adaptor, 1 WHDI Remote Control U sers’ m anual A-Mini USB cable WHDI Remote Control Adaptor User’s manual 2.
Power LED-indicate power status 3) LED indications Operating State Button-standby button WHDI Stick (Transmitter) Status Receiver Power Video ○ ○ ○ Powered Add Device ● ○ Normal operation ○ ○ PS: ○ Green LED is normally on 3 Link ○ ● Green LED flashes PRODUCT SPECIFICATIONS Supported Video Resolution 1080p, 1080i, 720p HDMI Interface Supports HDMI 1.3 Video Audio format and HDCP 2.0 with video encryption. Transmission Distance 10 meters line of sight (LOS) Operating Frequencies 4.
4.2 Receiver Connections z z 5 Connect your HD display (LCD, HDTV etc.)to the Receiver using an HDMI lead. Connect the power interface to the power adaptor (5V 3A) to power supply. WHDI Remote Control Instructions 5.1 Register or Add z z z z z z z z z z Connect WHDI Stick (Transmitter) and Receiver to source equipment and display equipment separately.
z the video source should not be blank Press "OK" after finishing modification 5.4 Disconnect Network z z z Press "Menu" to select "Disconnect Wireless link" Press "OK" to ensure disconnection Network disconnect when "Wireless off" reveals on the screen 5.
Delete To delete Receiver from device list or delete character of the device name; available to Receiver 4 MENU Menu; available to Receiver 5 Guest 3 6 To up; available to Receiver ▽ To down; available to Receiver To the right; available to Receiver 9 ▽ To the right; available to Receiver 10 OK To confirm; available to Receiver 11 Exit To back/exit; available to Receiver 12 Source To list all the video source; available to Receiver 13 Next Source To select next video source; availa
7 Troubleshooting Before following the troubleshooting guide below please make sure that your WHDI Stick, Receiver and attached equipment (HD source and display) are all properly connected, switched on and not in Standby Mode. No Video Power LED OFF Receiver Video LED flashes Receiver video LED abnormal Bad Picture 1. Check the status of the Link LED, and check if the HD Media player works normally 2. Check the interface and HDMI lead are undamaged and plugged into the correct socket 3.
z z Any problem of the Transceiver occurs within seven days after purchasing, Were it not for the artificial damage, and without any ware of the device, users can detect the device at Dfine customer service center with original commercial invoice and warranty card. The transceiver can be returned, replaced or repaired after confirming the problem.
Changes or modifications to this unit not expressly approved by Dfine Technology Co., Ltd. could void your right to operate this unit. Your radio is set up to transmit a regulated signal on an assigned frequency. It is against the law to alter or adjust the settings inside the product to exceed those limitations. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.