Wireless Media Box User Manual (4TV) Content 1 Important Information 1.1 Safety Precautions 1.2 Declaration of Conformity 1.3Special notice 1.4Cleaning 2 Product Overview 2.1Product Specifications 2.2Product Feature 2.3Packing Content 2.4Operating Principle 2.4.1 AP mode 2.4.2LAN mode 2.5 Functional Interface Description 2.5.1 Front Panel Description 2.5.2Back Panel Description 2.5.3Right Panel Description 3 Installation 3.1 Device Connection 4.Operation 4.1 Device Operation 4.1.
technician. Breakage caused by accidents such as but not limited to fire, water immersion and moisture. Use on incorrect voltage, use contrary to operating instructions. Product number got altered, removed or made illegible. 1.1 Safety Precautions Danger: Electricity Hazard Power must be switched off when not in use, any power adaptors connected AV devices and TV should be plugged out.
Put the product in a well-ventilated space and keep it away from direct sunlight or any source of heat. Do not expose the product to rain or moisture. 1.2 Declaration of Conformity R&TTE This product complies with Part 15C and Part 15E of FCC Rules. Part 15: Subpart C—Radiated Emission Limits, Additional Provisions. Part 15: Subpart E---Unlicensed National Information Infrastructure Devices. This device complies with relative criteria CE Certification.
Keep this device away from metal furniture and explosive products. Don’t put it on unsteady places. Ensure there is no danger hazard on joints of wires. Do not put it on dusty or damp environment. Keep it away from too low or too high temperature or any source of heat. This device should be powered by direct current. Ensure battery used on it meets the standard of 5V 2.5A. Putting heavy stuffs on this device is strictly prohibited. Place it on a well-invented area. Do not block vent area.
direct current output adaptor Certificates FCC、 CE Audio port Lotus base(L/R),digital optical Operating temperature 0℃ - 50℃ Dimensions 127mm(L)×96mm(W)×28mm(H) Weight 260g 2.2 Product Feature Support 1080P HD video With operating frequency of 2.4GHz With a transmission distance of 10 meters Built-out antenna Designed with functions as a wireless router Available to play video and audio files from U flash disk 2.
Supplied Accessories: One user manual, one power adaptor, one infrared remote control, one installation disk U sers’ manual Power Adaptor Remote Control User Manual Installation Disk 2.4 Operating Principles This device can be operated under two network connection mode 2.4.1 AP mode Picture 2 AP mode The 4TV acts as a wireless access point. Your Windows computer or smart device can be connect ed to 4TV directly.
This setup provides capability for remote operation and internet connection, as illustrated by picture 3. 2.5 Functional Interface Description 2.5.1 Front Panel Description Link LED Power LED 2.5.2 Picture 4 Front Panel Link LED : indicates connection status Power LED: indicates power supply status Back Panel Description RJ45 Port Optical Audio Port Power Audio L/R HDMI - 2.5.
USB Port IR Port Power Picture 6 Right Panel - Power Switch Button: to switch power on and off - Infrared Extension Port: to connect infrared wire - USB port: to connect USB flash disk 3 Installation 3.1 Connection HDMI Cable Adaptor Picture 7 Device Connection a) Connect 4TV to display equipment by HDMI cable, such as LED. b) Plug power adaptor in and device will be powered on. Please note: make sure wireless router is correctly configured. 4 Operation 4.1 Device User Guide 4.1.
① ② ④ ③ ⑤ ⑥ ⑦ ⑧ ⑨ Picture 8 Infrared Remote Control Table 1 Remote Control Button Description Number Name Function description ① PWR Standby button ② Return ③ OK To confirm ④ △ Up ⑥ ▽ △ Left ⑦ ▽ Down ⑧ Mode To select desired mode ⑨ Menu To show all items ⑤ To return to previous interface Right 4.1.
Picture 9 Boot Screen 4.1.3 Home Screen Home screen shows the current network connection mode and the client device connection status. Picture 10 Home Screen Device information: to show device name and wireless network status. Connection status: as illustrated by picture 11, you can know link status such as network IP address, connection process and connected output devices.
Picture 11 Device Connection Status 4.1.3.1 AP mode If 4TV runs in AP mode and device is trying to access network, home screen will be shown as below: a) Accessing network video will be shown. b) Wireless network information will be displayed in network status bar When wireless network is connected successfully, home screen will be shown as illustrated by picture 12. a) System will alert network is successfully connected. b) Wireless network information will be displayed in network status bar.
If wireless media box runs in LAN mode and device is trying to access network, home screen will be shown as below: a) System is trying to access network. b) Wireless network information will be shown at network status bar. When wireless network is connected successfully, home screen will be displayed as below: a) System alerts network is successfully connected. b) WiFi information and IP information will be shown at network status bar. 4.1.3.
Picture 16 Setup Menu Setup menu can help you configure wireless network, switch network mode, modify device name and change audio output mode and set language. 4.1.4.1 Switch network mode You can switch network mode by the following steps: a) Ensure home screen is displayed; b) Press 【Menu】button on remote control to show setup item; c) Use navigation button 【up】【down】to locate “connection setup’ item; d) Press 【OK】button on remote control to show subsidiary menu.
Picture 18 Wireless Network List c) Use navigation button 【up】and 【down】to locate desired wireless network; d) Press OK button to confirm; 1) If the wireless network that you want to connect is protected with a password, the password input screen will be shown. Use the navigation buttons to move the selection cursor and press the 【OK】button to input the selected character. Submit password and system will connect to selected wireless network. (As illustrated by picture 19).
a password, system will connect automatically. 3) Use 【Return】button on remote control to close password input screen and cancel wireless network connection. e) When system is trying to connect wireless network, connection video and network status will be shown on the screen. f) When network is successfully connected, connection mode will be switched to LAN mode. 1) 2) If system prompts wrong password, please input password again.
and SPDIF as follows: a) Ensure home screen is displayed. b) Press 【Menu】button on remote control to show setup items; c) Use navigation button to locate 【system setup】item; d) Press 【OK】button to enter into subsidiary items; e) Use navigation buttons to locate ‘Audio Output Selection’ item, and press 【OK】button to show audio output setting interface; Picture 21 Audio Output Setting f) Use navigation buttons on the remote control to move the selection bar to select the targeted output mode. 4.1.4.
Picture 22 Language Setting f) Use navigation button to choose desired language and press 【OK】to confirm. 4.1.4.6 Device Information Search you can click 【about device】to get to know device information by the following procedures: a) Ensure home screen is displayed; b) Press 【Menu】button on remote control to show setup items; c) Use navigation button to locate 【about device】item; d) Press 【OK】button to show system information. Picture 23 Device Information Interface 4.1.4.
Screen keyboard will be displayed automatically when you configure wireless network and modify device name. Picture 24 Screen Keyboard Infrared remote control user guide a) Press navigation button 【up】【down】to move cursor . b) Press 【OK】to submit selected item. Other buttons description: a) Backspace : to delete previous character; b) Enter : to submit c) Shift :to switch capitalized character and lowercase. d) : To switch English characters and symbols. 4.
Picture 25 System didn’t Install VC Package g) Select path to install package, and click 【Installation】to continue; Picture 26 Select Installation Path h) If system don’t have VC package, system will prompts install it or not .
i) Picture 27 Installation of VC Package Installation is complete Picture 28 Installation is Complete 4.2.2 Connection and Operation You can double click the “4TV Windows Control” shortcut icon to run the application manually. You can follow steps listed below to run the application exampled by Windows 7.
a) Ensure devices are connected to wireless network.. b) Ensure it is the same wireless network. c) Run 4TV windows control. If the windows firewall or other third party firewall allocations alert that the 4TV windows control requires network access , you should click the 【YES】 button to allow the application to connect to the network. d) For first time users, the “Local Shared Folder Setting” window will be shown automatically.
f) Picture 30 Add Sharing Folders 4TV Windows Control Display Information: Blue icon ( Red icon ( ): indicates this device is available; ): indicates this device is occupied. Move mouse cursor to 4TV control application icons, its information will be shown. g) Double click available device icon to connect. The play window will be displayed after the device is connected to the 4TV device.
h) You can select local media files to play in this window; Picture 32 Media Files Selection i) Click the category tab buttons to change the media category (movie/music/photo). j) Double click preferred video files to play. k) In the “Play” window, you can click the mirror button (marked by red circle) to show all the contents in your Windows computer on the 4TV device. Picture 33 Mirror Function Please note: main type and extend type can be only operated on windows7 operating system.
button. Please note: the above operation procedure is based on LAN mode. If system is under AP MODE, procedure is almost the same. 4.2.3 Operation Interface Description 4.2.3.
⑦ list wireless network Network information To display connected network information 4.2.3.2 Playing Screen Picture 35 Playing Screen Table 2 Description of Playing Screen Number ① Function Picture To rotate picture: rotating ② Play mode setting ③ Description Media item list rotating to left 90 degrees rotating to right 90 degrees To set play mode. You can play desired audio item by clicking its icon.
It also includes the entire item in U flash disk that connected to device. ④ ⑤ Process control Media item list Click media item to switch to other media items.
equipments. (only available in Windows 7 OS) 。 :beamer type: It will transmit all contents in Windows device screen to display equipments( only for windows 7 OS ) Please note: 1) It can control windows devices by USB mouse. 2) No video will be outputted in windows XP system 11 ○ Media category You can select the media server by tapping on the corresponding item. All media files under the root directory of the media server will be listed.
Picture 37 Application Category C) Input “4TV” in search and press enter to start searching. d) Click “4TV-Android Controller” item. Picture 38 Searching Results e) Click download to download control application. f) System will start downloading. g) Installation will be conducted automatically after downloading. 4.3.2 Connection and Operation a) Click 4TV-DMC icon to run application. b) 4TV Android application starts booting.
Picture 39 Wireless Network Connection 1) If you want to switch wireless network, press 【WI-FI】button to enter into Android wireless network control screen to set. 2) If the WIFI is connected, click 【Start】button to continue. 3) If something got wrong with wireless network or it is not connected,【Start】button will be shown as red. d) You can find all the devices that connected to the same wireless network as the Android phone.
Picture 40 Device List 1) Green device icon indicates device is available. If it is occupied, color of icon would be red. 2) If no device is detected by system, prompting information will appear. 3) Click 【Refresh】to refresh device list. e) Click device icon to connect desired device.
f) Picture 41 Device Connection You can click 【Cancel】 button to exit device connection Media files list will be shown after connection and you can select desired media files to play. Picture 42 Media Server List g) You can select the media server by tapping on the corresponding item. All media files under the root directory will be listed.
2) Item list below video, audio, picture category h) When you tap on a video or music item, the playing screen will be shown. Picture 43 Playing Interface 1) / 2) : stop playing media files. / 3) 4) 5) 6) 4.4 : to control the media item playback or pause. / / / : volume control. :to control the media item playback. : to play previous/next media item. : click the loop buttons to switch the loop mode.
5. Software Update User can get software updated by the following procedures(a U flash disk is needed): a) Get official update package named autoup.rom. If it is compressed file, decompress it and get ROM files. b) Ensure U flash disk system is FAT or FAT32. if it not, format U disk and select FAT or FAT32; c) Copy autoup.rom file to your U flash. d) Insert the U flash to device when device is off. e) Turn the device on and system will get updated automatically.
heavily overloaded, the playback operation will suffer interference. Why isn’t the mirror function fluent on Windows device? Windows control application will get screen parameter automatically. On most windows devices, this parameter will work, but they might be needed to be adjusted in some devices. Does the device can be connected to a U flash disk with a format NTFS? The system can read U flash disk with format NTFS, but can’t use it for software update.
environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.