39 ,QYHUWHU :LWK (QHUJ\ 6WRUDJH SUN-3.6K-SG01LP1-US SUN-5K-SG01LP1-US SUN-6K-SG01LP1-US SUN-7.6K-SG01LP1-US SUN-8K-SG01LP1-US 8VHU 0DQXDO 0DQXDO SUN-3.6K-SG01LP1-US-B SUN-5K-SG01LP1-US-B SUN-6K-SG01LP1-US-B SUN-7.
Contents Contents Contents 9GLKZ_ /TZXUJ[IZOUTY 5.8 Grid Setup Menu 6XUJ[IZ OTYZX[IZOUTY 5.9 Generator Port Use Setup Menu 2.1 Product Overview 5.10 Advanced Function Setup Menu 2.2 Product Features 5.11 Device Info Setup Menu 3UJK ,G[RZ OTLUXSGZOUT GTJ VXUIKYYOTM 3.1 Parts list 2OSOZGZOUT UL 2OGHOROZ_ 3.2 Mounting instructions *GZGYNKKZ 2.3 Basic System Architecture /TYZGRRGZOUT 3.3 Battery connection 3.
1. Safety Introductions 2.1 Product Overview ·This chapter contains important safety and operating instructions. Read and keep this manual for future reference. ·Before using the inverter, please read the instructions and warning signs of the battery and corresponding sections in the instruction manual. ·Do not disassemble the inverter. If you need maintenance or repair, take it to a professional service center. ·Improper reassembly may result in electric shock or fire.
2.2 Product Features AC cable DC cable WiFI · -220V Single phase,120V/240V Split phase Pure sine wave inverter. GPRS · - Self-consumption and feed-in to the grid. Cloud l d services i phone · - Auto restart while AC is recovering. · - Programmable supply priority for battery or grid. Wind Solar Backup Load On-Grid Home Load Grid CT · - Programmable multiple operation modes:On grid,off grid and UPS. CT · - Configurable battery charging current/voltage based on applications by LCD setting.
Current transformer (Optional) 6 7 Battery sensor L-type Hexagon wrench 2 1 1 · The ambient temperature should be between -25~60℃ to ensure optimal operation. · Be sure to keep other objects and surfaces as shown in the diagram to guarantee sufficient heat dissipation and have enough space for removing wires. Chart 3-1 Parts List 3.
14 mm (0.55 in.) All wiring must be performed by a professional person. Connecting the battery with a suitable cable is important for safe and 52~60mm [(2.05 in.)to(2.36 in.)] efficient operation of the system. To reduce the risk of injury, refer to Chart 3-2 for recommended cables. Please follow below steps to implement battery connection: 1. Please choose a suitable battery cable with correct connector which can well fit into the battery terminals. 2.
3.3.2 Battery temperature connection 3.4 AC Input/Output Connection · Before connecting to AC input power source,please install a separate AC breaker between inverter and AC input power source.This will ensure the inverter can be securely disconnected during maintenance and fully protected from over current of AC input.The recommended of AC breaker is 50A for 5kw and 80A for 8KW. · There are three terminal blocks with “Grid”“Load”and “GEN”markings.Please do not misconnect input and output connectors.
Be sure that AC power source is disconnected before attempting to wire it to the unit. 3. Then,insert AC output wires according to polarities indicated on the terminal block and tighten terminal. Be sure to connect corresponding N wires and PE wires to related terminals as well. 4. Make sure the wires are securely connected. 5. Appliances such as air conditioner are required at least 2-3 minutes to restart because it is required to have enough time to balance refrigerant gas inside of circuit.
3.6 CT Connection (Region:EU) (Region:US) N L N L N L N Inverter Inverter 3 N White wire 3 4 L2 L1 Black wire White wire 3 CT 4 4 L 3 4 5 6 6 N L2 L1 Black wire CT2 L L2 N Grid 5 CT1 Grid L1 3.7 Earth Connection(mandatory) Ground cable shall be connecred to ground plate on grid side this prevents electric shock. if the original protective conductor fails. N Note: When the inverter is in the off-grid state, the N line needs to be connected to the earth. 3.
3.
(Region:US) + + - - + + - - N L2 L1 N L2 L1 N L2 L1 Inverter Ground CAN Breaker Breaker Load Breaker Battery Solar Breaker PE N L2 L1 6 5 CT 4 CT or Generator Generat Breaker Microinverter 3 Smart Load Earth-BAR - 17 - - 18 -
4. OPERATION 5. LCD Display Icons 4.1 Power ON/OFF 5.1 Main Screen Once the unit has been properly installed and the batteries are connected well,simply press On/Off button(located on the left side of the case) to turn on the unit.When system without battery connected,but connect with either PV or grid,and ON/OFF button is switched off,LCD will still light up(Display will show OFF),In this condition,when switch on ON/OFF button and select NO battery,system can still working.
5.1.1 LCD operation flow chart 5.2 Solar Power Curve Solar Solar Page Solar Graph This is Solar Panel detail page. Power: 1560W PV1-V: 286V PV2-V: 45V PV1-|: 5.5A Grid Page Grid Graph P1: 1559W ʏ ʐ ʑ Today=8.0 KWH Total =12.00 KWH PV2-|: 0.0A P2: 1W Energy Inverter Page Main Screen Inverter Battery Page Load Page BMS Page Load Graph ʏ Solar Panel Generation. ʐ Voltage,Current,Power for each MPPT. ʑ Solar Panel energy for Day and Total.
Li-BMS Batt Stand-by 5.4 System Setup Menu Mean Voltage:50.34V Charging Voltage :53.2V Total Current:55.00A Discharging Voltage :47.0V Mean Temp :23.5C Charging current :50A Total SOC Discharging current :25A :38% Sum Data System Setup This is System Setup page. Dump Energy:57Ah Details Data SOC: 36% System Work Mode Battery Setting U:50.50V I:-58.02A Grid Setting Gen Port Use Advanced Function Device Info. Li-BMS Power: -2930W Temp:30.
This is Battery Setup page. ʏ ʑ Battery Setting Start ① A 30% 30% 40A 40A Gen Charge Grid Charge Gen Signal Grid Signal Gen Max Run Time 0.0 hours Gen Down Time 0.5 hours ② Batt Set2 ʑ Start =30%---It indicates that the Generator will start when the Battery capacity is less than 30% in the condition of Off-grid mode. A = 40A---It indicates the Current that the Generator charges the Battery after started. Gen Charge---The Switch that the Generator charges the Battery.
5.8 Grid Setup Menu 5.9 Generator Port Use Setup Menu Grid Setting Grid Mode Please select the correct Grid Mode in your local area. If you are not sure, please choose General Standard. General Standard GEN PORT USE Mode Generator Input UL1741ͥ IEEE1547 Grid Set1 CPUC RULE21 SRD-UL-1741 Grid Type Gen connect to Grid input PORT Set1 Please select the correct Grid Type in your local area, otherwise the machine will not work or be damaged.
3UJK // =OZN =OTJ:[XHOTK PassWord Factory restart: 9999 X--X--X--X Lock out all changes:7777 DEL 1 2 3 4 5 6 7 8 9 CANCEL 0 OK AC cable DC cable Wind Backup Load On-Grid Home Load =OTJ:[XHOTK )UTZXURRKX CT Grid Battery 5.11 Device Info Setup Menu 3UJK /// =OZN -KTKXGZUX Li-BMS Device Info. This page show Inverter ID, Inverter version and alarm codes. Inverter ID: 1601012001 Charge Volt Curr Temp SOC Energy Fault MAIN:Ver1400 HMI: Ver0302 Volt Curr 52.0% 26.0Ah 0.0V 0.
3UJK < =OZN 5T -XOJ /T\KXZKX On-Grid+AC couple Solar AC cable Backup Load DC cable On-Grid Home Load Grid 1. Inverter serial number; 2. Distributor or service center of the inverter ; 3. On-grid power generation date; 4. The problem description (including the fault code and indicator status displayed on the LCD) is as detailed as possible. 5. Your contact information.
F23 Tz_GFCI_OC_Fault F54 AC_C_InductCurr_DcHigh_Fault F24 DC_Insulation_Fault F55 DC_VoltHigh_Fault F25 DC_Feedback_Fault F56 DC_VoltLow_Fault F26 BusUnbalance_Fault F57 AC_BackFeed_Fault F27 DC_Insulation_ISO_Fault F58 AC_U_GridCurr_High_Fault F28 DCIOver_M1_Fault F59 AC_V_GridCurr_High_Fault F29 AC_AirSwitch_Fault F60 AC_W_GridCurr_High_Fault F30 AC_MainContactor_Fault F61 AC_A_InductCurr_High_Fault F31 AC_SlaveContactor_Fault F62 AC_B_InductCurr_High_Fault F32 DCIOver
8.Limitation of Liability In addition to the product warranty described above, the state and local laws and regulations provide financial compensation for the product's power connection (including violation of implied terms and warranties). The company hereby declares that the terms and conditions of the product and the policy cannot and can only legally exclude all liability within a limited scope. 9. Datasheet Technical Data SUN-3.6KSG01LP1US/-B SUN-5KSG01LP1US/-B SUN-6KSG01LP1US/-B SUN-7.
Warning: 1. Please remove logger after power off. 2. Reset button supports direct press. Do not remove waterproof plug. Notice: Please read this manual carefully before using products and keep it in the place where O&M providers can easily find. Due to product upgrade and other factors, the content of this manual might change from time to time. Please take actual product as standard and get latest manual from www.solarman.cn or sales.
for iOS for Andriod SOLARMAN for end user for iOS for Andriod SOLARMAN PRO澳for business Scan QR code to get quick guide
1. Stick Logger Installation Type 1 Step1: Assemble logger to the inverter communication interface as shown in the diagram. 濄 According to the arrow direction. Step2: Install/Remove Install Remove Clockwise rotation Counter-clockwise rotation澳 Warning: Please do not hold the logger body to rotate while install or remove the logger.
Type 2 Step1: Assemble logger to the inverter communication interface as shown in the diagram. According to the arrow direction. 濄 Step2: Install/Remove Install Remove Clockwise rotation Counter-clockwise rotation澳 Warning: Please do not hold the logger body to rotate while install or remove the logger.
2. Logger Status 2.1 Check Indicator light Lights NET Implication Status Description(All lights are single green lights.) 1.Light off: Connection to the router failed. Communication 2.On 1s/Off 1s(Slow flash): Connection to the router succeeded. with router 3.Light keeps on: Connection to the server succeeded. 4.On 100ms/Off 100ms(Fast flash): Distributing network fast. 1.Light keeps on: Logger connected to the inverter. COM Communication 2.Light off: Connection to the inverter failed.
濡濘濧 濖濢濠 濥濘濔濗濬 Fault Description NET Any state OFF Slow flash COM OFF ON ON Fault Cause Solution READY 1.Check the connection between stick logger and inverter. Remove the stick logger and install again. 2.Check inverter’s communication rate to see if it matches with stick logger’s. 3.Long press Reset button for 5s, reboot stick logger. Slow flash 1.Connection between stick logger and inverter loosen. Communication with 2.
濡濘濧 濖濢濠 濥濘濔濗濬 Fault Description NET OFF Fast flash Any state COM OFF Any state Any state Fault Cause Solution READY OFF Any state Fast flash Power supply abnormal SMARTLINK networking status Restore factory settings 1.Connection between stick logger and inverter loosen or abnormal. 2.Inverter power insufficient. 3.Stick Logger abnormal. 1.Check the connection, remove the stick logger and install again. 2.Check inverter output power. 3.Contact our customer service. Normal 1.
4.
澻澳濜瀇澳濼瀆澳瀁瀂瀇澳瀁濸濶濸瀆瀆濴瀅瀌澳瀇瀂澳瀀瀂濷濼濹瀌澳瀂瀇濻濸瀅澳濼瀁濹瀂瀅瀀濴瀇濼瀂瀁澳濵濸濶濴瀈瀆濸澳濔濣濣澳濻濴瀆 瀂濵瀇濴濼瀁濸濷澳濿瀂濶濴濿澳濸濿濸濶瀇瀅濼濶濼瀇瀌澳瀃瀅濼濶濸澳濴瀁濷澳濙濜濧澳濴濿瀅濸濴濷瀌濁澼
濇濡濕濦濨澔激濝濢濟澔濗濣濢濚濝濛濩濦濕濨濝濣濢 漏濄漐濘瀁瀇濸瀅澳瀁濸瀇瀊瀂瀅濾濼瀁濺澳瀃濴濺濸激瀆濻瀂瀅瀇澳瀃瀅濸瀆瀆澳瀅濸瀆濸瀇澳濵瀈瀇瀇瀂瀁澳濹瀂瀅澳濄濦激濡濘濧 澳濿濼濺濻瀇澳濹濿濴瀆濻濼瀁濺激濘瀁瀇濸瀅濼瀁濺澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳瀀瀂濷濸濁 漏濅漐濠濴濾濸澳瀆瀈瀅濸澳瀇濻濸澳瀃濻瀂瀁濸澳濶瀂瀁瀁濸濶瀇濸濷澳瀇濻濸澳濪濼濙濼澳瀁濸瀇瀊瀂瀅濾澿澳濸瀁瀇濸瀅濼瀁濺澳 澳濪濼濙濼澳瀃濴瀆瀆瀊瀂瀅濷澿澳瀆瀇濴瀅瀇濼瀁濺澳瀇瀂澳濶瀂瀁濹濼濺瀈瀅濸濁
漏濆漐濧濻濸澳瀆濼濺瀁濴濿澳濿濼濺濻瀇瀆澳瀆濿瀂瀊濿瀌澳濹濿濴瀆濻澳瀂瀅澳濾濸濸瀃澳瀂瀁澳濼瀁濷濼濶濴瀇濸澳瀇濻濴瀇澳瀇濻濸澳瀁濸瀇激 瀊瀂瀅濾澳濻濴瀆澳濵濸濸瀁澳瀆瀈濶濶濸瀆瀆濹瀈濿濿瀌澳濴濶濶濸瀆瀆濸濷澿澳瀂瀇濻濸瀅瀊濼瀆濸澳濼瀇澳濹濴濼濿瀆濁澳濣濿濸濴瀆濸澳濶濻濸濶濾澳 濴濺濴濼瀁澳濼瀁澳濴澳濹濸瀊澳瀀濼瀁瀈瀇濸瀆濁澳濜濹澳瀇濻濸澳瀆濼濺瀁濴濿澳濿濼濺濻瀇瀆澳濴瀅濸澳瀆瀇濼濿濿澳瀁瀂瀇澳瀁瀂瀅瀀濴濿澿澳瀃濿濸濴瀆濸澳 瀅濸濶瀂瀁濹濼濺瀈瀅濸澳濼瀇濁 濡瀂瀇濼濶濸漡 濄濁濗瀈瀅濼瀁濺澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澿澳濼瀇澳瀊濼濿濿澳瀆濻瀂瀊澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳瀇濼瀃瀆濁 濅濁濜濹澳瀇濻濸澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳瀃瀅瀂濶濸瀆瀆澳濿濴瀆瀇瀆澳瀀瀂瀅濸澳瀇濻濴瀁澳濅濃瀆澿澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳濹濴濼濿濸濷澿澳 澳澳澳濸瀁瀇濸瀅濼瀁濺澳瀇濻濸澳瀁濸瀋瀇澳瀆瀇濸瀃澻濧濻濸澳瀃濼濶瀇瀈瀅濸澳濵濸濿瀂瀊澳瀊濼濿濿澳瀆濻瀂瀊澳瀇濻濸澳瀁濸瀋瀇澳瀆瀇濸瀃濁澳澼 澳澳澳澻濄澼濖濻濸濶濾澳瀇濻濸澳濹濴瀈濿瀇澳瀅濸濴瀆瀂瀁澿澳濶濿濼濶濾澳瀇瀂澳濺瀂澳濵濴濶濾澿澳濶瀂瀁濹濼濺瀈瀅濴瀇濸澳濴濺濴濼瀁濁 澳澳澳
澵濄澔濗濣濢濚濝濛濩濦濕濨濝濣濢 漏濄漐濣濿濸濴瀆濸澳瀀濴濾濸澳瀆瀈瀅濸澳瀇濻濴瀇澳瀇濻濸澳瀃濻瀂瀁濸澳濼瀆澳濶瀂瀁瀁濸濶瀇濸濷澳瀇瀂澳瀇濻濸澳濪濼濙濼澳瀁濸瀇激 澳瀊瀂瀅濾澳濴瀁濷澳濸瀁瀇濸瀅澳瀇濻濸澳濪濼濙濼澳瀃濴瀆瀆瀊瀂瀅濷濁 澳澳澳濔濣濣澳瀊濼濿濿澳濴瀈瀇瀂瀀濴瀇濼濶濴濿濿瀌澳濺濸瀇澳瀇濻濸澳濶瀈瀅瀅濸瀁瀇澳瀀瀂濵濼濿濸澳瀃濻瀂瀁濸澳濪濼濙濼澳濴濶濶瀂瀈瀁瀇澿澳 瀇瀌瀃濸澳濼瀁澳瀇濻濸澳濪濼濙濼澳瀃濴瀆瀆瀊瀂瀅濷澳瀇瀂澳濸瀁瀇濸瀅澳瀇濻濸澳濶瀂瀁濹濼濺瀈瀅濴瀇濼瀂瀁澳瀃瀅瀂濶濸瀆瀆濁澳濜濹澳瀇濻濸澳瀁濸激 瀇瀊瀂瀅濾澳濼瀆澳瀁瀂瀇澳瀇濻濸澳瀂瀁濸澳濿瀂濺濺濸瀅澳瀁濸濸濷瀆澳瀇瀂澳濶瀂瀁濹濼濺瀈瀅濸澿澳瀆瀊濼瀇濶濻澳瀇濻濸澳瀁濸瀇瀊瀂瀅濾濁澳 濪濻濸瀁澳瀆瀊濼瀇濶濻濼瀁濺澳瀇濻濸澳濴濶濶瀂瀈瀁瀇澿澳瀌瀂瀈澳濶濴瀁澳瀀濴瀁瀈濴濿濿瀌澳濸瀁瀇濸瀅澳瀌瀂瀈瀅澳瀁濸瀇瀊瀂瀅濾澳 濴濶濶瀂瀈瀁瀇濁澳濡瀂瀇濸濍澳濈濚澳濪濼濙濼澳濼瀆澳瀁瀂瀇澳瀆瀈瀃瀃瀂瀅瀇濸濷澳濹瀂瀅澳瀁瀂瀊濁 澳澳澳澻濅澼澳濚瀂澳瀇瀂澳濮濡濸瀇瀊瀂瀅濾澳濦濸瀇瀇濼瀁濺瀆濰澳濼瀁瀇濸瀅濹濴濶濸澿澳濴瀁濷澳瀆濸濿濸濶瀇澳瀇濻濸澳瀆瀇濼濶濾澳濿瀂濺濺
濜濹澳濼瀇澳濼瀆澳瀈瀁濴濵濿濸澳瀇瀂澳濹濼瀁濷澳濴瀁澳濔濣濲濫濫濫濫濫澻濦濂濡澼澳濼瀁澳瀊濼瀅濸濿濸瀆瀆澳瀁濸瀇瀊瀂瀅濾澳濿濼瀆瀇澿澳 瀃濿濸濴瀆濸澳瀀濴濾濸澳瀆瀈瀅濸澳瀇濻濸澳濷濼瀆瀇濴瀁濶濸澳濵濸瀇瀊濸濸瀁澳濪濼濙濼澳澳瀅瀂瀈瀇濸瀅澳濴瀁濷澳瀆瀇濼濶濾 濿瀂濺濺濸瀅澳濼瀆澳濿濸瀆瀆澳瀇濻濴瀁澳濄濃澳瀀濸瀇濸瀅瀆濁澳濜濹澳瀇濻濸瀅濸澳濼瀆澳濴瀁瀌澳瀃瀅瀂濵濿濸瀀澳濷瀈瀅濼瀁濺澳瀇濻濸 濶瀂瀁瀁濸濶瀇濼瀂瀁澳瀂瀅澳瀆濸瀇瀇濼瀁濺澳瀃瀅瀂濶濸瀆瀆澿澳瀌瀂瀈澳濶濴瀁澳瀅濸瀃濸濴瀇澳瀇濻濸澳濴濵瀂瀉濸澳瀆瀇濸瀃瀆濁澳 濜濹澳瀌瀂瀈澳瀆瀇濼濿濿澳濶濴瀁瀁瀂瀇澳濹濼瀁濷澳瀇濻濸澳濔濣濲濫濫濫濫濫澿澳瀌瀂瀈澳濶濴瀁澳濶濻濸濶濾澳瀇濻濸澳濿瀂濺濺濸瀅 瀀濴瀁瀈濴濿澳濹瀂瀅澳瀇瀅瀂瀈濵濿濸瀆濻瀂瀂瀇濼瀁濺澳瀂瀅澳濶瀂瀁瀇濴濶瀇澳瀂瀈瀅澳濖瀈瀆瀇瀂瀀濸瀅澳濦濸瀅瀉濼濶濸濁
Warning: Please make sure the stick logger is working properly before you leave the site. If there is anything abnormal, please do not leave the site and contact customer service at the first time. Customer service number: 400-181-0512 If you have any technical queries about our products, please contact us and provide the following information: 1. Product model and serial number of stick logger. 2. Product model and serial number of connected inverter.
Dear Customers, Thank you very much for using our products. In order to provide you with better service, please fill in the warranty card and reserve it carefully.
Warranty Policy If there is any breakdown which caused by the product‘s own quality, customers can send the warranty card with the product to our Customer Service Center. 1.According to the prescription, the warranty period is 5 years(From the day when you receive the product). During the warranty period, we provide free maintenance service to solve all non-artifical quality problems if the product is under normal usage circumstance.
