User's Manual

ManualsBrandsDexin ManualsComputers & AccessoriesWireless Optical Mouse

Table Of Contents

Wireless Optical Mouse

USER’S MANUAL

Model #: DC-19

System Requirement

Mouse compatible with standard Microsoft mode

button and wheel function require Win98/2000/ME/NT/XP

Before you begin

Keep this installation guide for future reference! It contains Important Troubleshooting

Information.

Keep your old PS/2 mouse as a back-up device.

Getting Started

Congratulations on your purchase of an 800dpi (or 400dpi) WIRELESS OPTICAL MOUSE.

By using the advanced RF technology a 360°operation is possible and no line-of-sight

is required between the receiver and the mouse. The 800dpi high resolution will bring

users the best operation accuracy and efficiency, especially for a display of 1024*768

or higher. It operates at twice the speed and only requires 1/4 of the space in

comparison to a 400dpi mouse.

Package Contains

Your DC-19 Mouse package includes the following:

1. Optical Mouse

2. Receiver

3. User’s manual

4. CD-ROM Driver for Windows 98/2000/ME/NT/XP(Optional)

5. 2 AA size alkaline batteries

Note：If any part is missing, please contact your dealer for a replacement

immediately.

Precaution

The optical mouse cannot work on a glass or mirror surface. Avoid operating this

mouse on a glossy surface. Otherwise, this mouse may not operate normally.

For consideration of saving battery power, it is strongly recommended to operate

Summary of content (8 pages)

PAGE 1
Wireless Optical Mouse USER’S MANUAL Model #: DC-19 System Requirement Mouse compatible with standard Microsoft mode 3rd button and wheel function require Win98/2000/ME/NT/XP Before you begin Keep this installation guide for future reference! It contains Important Troubleshooting Information. Keep your old PS/2 mouse as a back-up device. Getting Started Congratulations on your purchase of an 800dpi (or 400dpi) WIRELESS OPTICAL MOUSE.
PAGE 2
an optical mouse on a bright surface with fine texture to obtain lower power consumption of the high illumination LED. A very dark surface will cause higher power consumption. For optimal performance, place the receiver at least 8 inches or 20 centimeters away from other electrical devices, such as the computer, the computer monitor, speakers or other external storage drives.
PAGE 3
Step 2. Synchronize the RF Mouse If the mouse is in sleep mode click the mouse button once to wake it up. 1. Plug the receiver into the notebook Computer’s USB ports or into the keyboard’s USB port. 2. Bring the mouse within 1 ft range from the receiver, Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the “CONNECT” button once. Do Not depress the CONNECT button longer then 1.5 seconds. (The red sensor light will go off when the “CONNECT” button is pressed down.
PAGE 4
batteries ready for replacement. Or, if the user has a companion charger base, and Two re-chargeable batteries are inside the mouse, charge the mouse as soon as possible. Power off the mouse 1. Be sure the mouse is NOT in sleep mode. If it is, press any key to wake it up. 2. Press and hold the Connect button on the bottom of the mouse for more than 2 seconds. (The red light will go off while the Connect button is depressed.) 3. Wait until the red light flash once. Release the Connect button. 4.
PAGE 5
GENERAL SPECIFICATIONS 800dpi (or 400dpi) hardware resolution Digital Radio Frequency wireless mouse with receiver 1 channels and 256 ID selections for your options to prevent interruption 3 buttons design with scrolling wheel Ergonomic design for comfortable grip Electromagnetic Characteristics (EMC) This unit complies with Part 15 of FCC Rules. Operation is subject to following two conditions: (1) This device may not cause harmful interference.
PAGE 6
Troubleshooting 1. Mouse does not function If mouse is not functional, please turn off the computer first. Check the receiver and make sure it is firmly attached to the USB port of the computer. Check the placement of batteries and see if they are properly connecting. The "+" and "-" on the batteries must match the "+" and "-" on the slots. If the batteries aren't inserted correctly, the device won't work. Restart the computer again.
PAGE 7
Note: Avoid using this device on a metal surface because a large surface of iron, aluminum, copper, or other metal may act like a shielding to the RF antenna of the mouse and the receiver. 3. Interference with other RF wireless mouse If the interference comes from other same model of RF wireless mice, please “Setting up connection between mouse and receiver” of the installation guide to switch to a new RF channel. A new identification code is also generated upon the completion of channel switching.
PAGE 8
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.