User Manual

ManualsBrandsDexin ManualsComputers & AccessoriesHP Wireless Optical Mobile Mouse

MWP103-P1MH HP Wireless Optical Mobile Mouse Page 1 of 12 1.0 Edition

HP Wireless Optical Mobile Mouse

MWP103-P1MH USER’S MANUAL (27MHz)

Important Ergonomic Information

Some experts believe that using any mouse or trackball may cause serious injury to

hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas,

see a qualified health professional.

TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS:

 Take frequent breaks, get up and walk around several times every hour.

 Vary your tasks throughout the day.

 Keep your shoulders relaxed with your elbows at your side. Position your

keyboard and mouse so you do not have to reach.

 Adjust your chair and keyboard so your upper arms and wrists are straight.

 Avoid resting your wrists on sharp edges.

System Requirement

 Mouse compatible with standard Microsoft OS

 3

button and wheel function require Win98/ ME/ 2000/ XP/ Vista

 If your computer’s operating system is Windows 98/ 98SE, please prepare the

Windows98 or 98SE compact disk for system’s request during the installation of

mouse.

Before you begin

 Keep this installation guide for future reference! It contains Important

Troubleshooting Information.

 Keep your old PS/2 or USB mouse as back-up devices.

Summary of content (12 pages)

PAGE 1
HP Wireless Optical Mobile Mouse MWP103-P1MH USER’S MANUAL (27MHz) Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: Take frequent breaks, get up and walk around several times every hour. Vary your tasks throughout the day.
PAGE 2
Getting Started Congratulations on your purchase of an 800dpi Wireless Optical Mouse. By using the advanced RF technology a 360° operation is possible and no line-of-sight is required between the receiver and the mouse. The 800 high resolution will bring users the best operation accuracy and efficiency, especially when the pixel of display over 1024*768 pixel. It operates at twice the speed and only requires 1/4 of the space in comparison to a 400 dpi mouse.
PAGE 3
For optimal performance, place the receiver at least 8 inches or 20 centimeters away from other electrical devices, such as the computer, the computer monitor, speakers or other external storage drives. For a better transmission distance, avoid using this device on a metal plate or desktop because a large surface of iron, aluminum, copper and other metal will act as a shield or ground to the RF antenna of the mouse and receiver. Operating on a metal surface may shorten the transmission distance.
PAGE 4
Hardware Installation Guide (Mouse) Insert the battery 1. Remove the battery compartment cover. 2. Insert 2 AAA alkaline batteries in correct direction indicated by the battery compartment label. 3. Replace the battery compartment cover. Connect the receiver with computer. 1. Turn off your computer 2. Disconnect the current mouse 3. Plug the USB connector (receiver) into USB port (computer). 4. Turn the computer on a. USB is a PnP device; you can plug the device no matter the computer is on or off.
PAGE 5
2. Power on the mouse. 3. Hold the mouse upside-down and use a pointed object, such as a pen tip, to click the CONNECT button (ID button) once. 4. Click the receiver’s connect button once, within 5 seconds after clicking the connect button on the mouse. The green LED will start blinking, when the connection is established. Move the mouse around to test if it was successful. 5. If the synchronization is not successful for some reason please Note: * a. Remove the batteries and unplug the receivers b.
PAGE 6
time, should have a new set of batteries ready for replacement as soon as possible. POWER ON/OFF MOUSE There are 2 methods for power ON/OFF: A. By sliding ON/ OFF switch on the bottom, or B. The patent of ID power ON/OFF function, as following: Power OFF the mouse 1. Be sure the mouse is NOT in sleep mode. If it is, press any key to wake it up. 2. Press and hold the Connect button on the bottom of the mouse for more than 2 seconds. 3. The red light will flash then go off. 4.
PAGE 7
standby mode. Sleep mode – If the mouse is left intact for around 8 minutes, it goes to sleep mode and shuts down the sensor to maintain minimum power consumption. No moving operation is possible in this mode. WAKE UP THE MOUSE This mouse can work promptly under standby mode so users might not be able to tell the existence of this mode. But, in sleep mode, users have to press any button to wake up the mouse for normal operation.
PAGE 8
800 dpi hardware resolution. Low power indicator. Power ON/OFF switch. 1 channel RF Digital Radio Frequency. Ergonomic and enlarge buttons design for comfortable grip. 2 AAA batteries to operate the mouse. Troubleshooting 1. Mouse does not function If mouse is not functional, please turn off the computer first. Check the receiver and make sure it is firmly attached to the USB port of the computer. Check the placement of batteries and see if they are properly connecting.
PAGE 9
receiver starts flashing, the mouse is ready to operate. Optical Sensor Mouse functions best on surfaces with details for tracking. It may not function on reflective, reflective pattern or non-visible detail surfaces! 2. Reducing Interference with Other Wireless Devices Reducing Interference with Other Wireless Devices: All 27MHz radio-based devices are subject to interference from other 27MHz radio-based devices, such as wireless telephones, wireless baby monitors, and wireless toys.
PAGE 10
change the location of the receiver. 4. If you have difficulty connecting the wireless mouse: Increase the distance between the set of wireless mouse and other radio device units. Turn off the other wireless devices, or their base units that are in close proximity to the receiver of this wireless mouse. Try connecting the wireless mouse and its receiver again. To verify that your device is connected and working properly, open a document and try the device.
PAGE 11
may cause harmful interference to radio communications. interference will not occur in a particular installation. However, there is no guarantee that If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver.
PAGE 12
CE - Type acceptance: EN300 220 Short Range Device MWP103-P1MH HP Wireless Optical Mobile Mouse Page 12 of 12 1.