RF WIRELESS SCROLL MOUSE USER’S MANUAL Model #: MWP0926 1
Important Ergonomic Information Some experts believe that using any mouse or trackball may cause serious injury to hands, wrists, arms, neck, or back. If you feel pain, numbness, or weakness in these areas, see a qualified health professional. TO REDUCE THE RISK OF INJURY, FOLLOW THESE PRECAUTIONS: l Take frequent breaks, Get up and walk around several times every hour. Vary your tasks throughout the day. Keep your shoulders relaxed with your elbows at your side.
Note:If any part is missing, please contact your dealer for a replacement immediately. Precaution ! For optimal performance, place the receiver at least 8 inches or 20 centimeters away from other electrical devices, such as the computer, the computer monitor, speakers or other external storage drives.
Step 2. Setting up the correct channel for both of receiver and mouse This RF wireless mouse provides 2 different carriers channel and up to 256 identification codes to avoid interference with other radio devices or other same model RF wireless mouse. Before you using the wireless mouse, please set the same carrier frequency and ID channels for both receiver and mouse. Please follow the steps as below to set up: 1.
GENERAL SPECIFICATIONS l l l l Digital Radio Frequency wireless mouse with receiver 2 channels and 256 ID selections for your options to prevent interruption. 3 buttons design for multimedia purpose to immediately play Ergonomic design for comfortable grip Electromagnetic Characteristics (EMC) FCC ID: NIYMWP0926 This unit complies with Part 15 of FCC Rules. Operation is subject to following two conditions: (1)This device may not cause harmful interference.
Troubleshooting 1. Mouse does not function n If mouse is not functional, please turn off the computer first. n Check the cable is firmly attached to the computer mouse port. n Check the channel selection of both receiver and mouse are the same. n Check if the batteries are properly connecting. The "+" and "-" on the batteries must match the "+" and "-" on the slots. If the batteries aren't inserted correctly, the device won't work. n Restart the computer again. 2.
receiver of this wireless mouse. n Try connecting the wireless mouse and its receiver again. n To verify that your device is connected and working properly, open a document and try the device. For additional suggestions, read the FCC Compliance Statement on the follow page.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.