Control unit 300 Series mounting + operating
1 Overview This control unit is designated to operate an electrically driven bed with optional comfort functions. • Power supply is provided via SMPS so the control box has protection class III. • The system is operated with an RF remote. The RF receiver is integrated into the control unit.
Control Unit 258-2 CU258-2 2 Mounting the control unit This mounting bracket is fixed on the flipside of the bed These two bolts fix the position of the control unit between the mounting bracket.
October 31, 2012 Page 4 of 10
Performance data control unit Duty cycle 2/18 min.
2.1 Power supply PD12 65444 Connecting cable73178 to control box Power supply cable 3.00.401.151.
Remote Control 258B 2.2 RF258B Frontside Keys for fixed positions 1 2 3 4 7 5 8 6 9 10 11 12 Choose between comfortable positions Manual adjustment keys Move head & foot rest up and down manually Massage keys X With the timer key you program duration and stop the massage function. X The LEDs signal the programmed duration, the key below starts the massage. With the Head & Foot keys you can select the massage zones.
Performance data remote (RF transmitter) Modulation GFSK Frequency Range 2.403~2.480GHz Battery AAA Working Current <40mA Standby Current <8uA Ambient Temperature -40—85Ԩ RC Dimension 145*50*14mm PCB Material & Size FR4 1.
3 Board Schematics (remote) 3.1 Remote 3.
4 Functional Description Take cable 3.00.401.151.30 and connect it to mains supply. The system is delivered paired! You can test the functions of the system with the RF remote. Pairing instruction (in case of trouble) Pairing the remote with the control box. The distance between remote and control box for pairing should be less than 2 meters! 1. Remove the battery cover on the flipside of the remote. 2. Insert/check existing 3x AAA batteries. 3.