User's Manual

Table Of Contents

RF075E Functional Specification

Introduction

In order to make the hospital bed up / down ,we need to control the

two motors forward / reverse by turning on / off the corresponding

relays.

Product ID

Pic 1. Transmitter’s ID

PAGE 1
RF075E Functional Specification Introduction In order to make the hospital bed up / down ,we need to control the two motors forward / reverse by turning on / off the corresponding relays. Product ID Pic 1.
PAGE 2
Product Specification List 1. Transmitter’s parameter modulation GFSK Frequency Range 2.4~2.4835GHz Transmitted Power 0 dBm Battery 2 AAA Battery,3V Working Current <15mA Standby Current <5uA Ambient Temperature -40—85℃ RC Dimension PCB Material & Size Housing Material 128*40*17mm FR4 1.0mm 55*38.
PAGE 3
The keys definition: 1.
PAGE 4
Functional Description Pairing method： 1. Press the pairing button of the receiver and the LED is on, then you have 10s to make the remote to pair with the receiver. 2. The distance between the transmitter and the receiver should be less than 2 meters when we do the pairing action. press the KEY_1 and KEY_2 of the transmitter simultaneously till the LED blinks ,then the pairing operation is successful . if we can't see the LED blinking till it is off ,the pairing is fail. 3.
PAGE 5
FCC WARNING This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.