Quick Guide

Quick guide RF1058
09.04.2020 xxxxx 1.0 1 / 1
GB
For wireless operation of your motorized comfort bed system
Wireless, ergonomic, reliable, easy handling, elegant design
Activate the pairing mode at the CU458-2.
Example for a Pairing method:
1. Press the pairing button (a) at the CU458-2 2x until the LED (b) turns on. You now have 60s for the pairing process.
2. Press button (1) and (20) of the RF1058 simultaneously. If the pairing LED or the LED SET flashes 2x, the programming
has been completed.
3. According to this method you can pair an external Power Socket or a second CU458-2 by using button (3) and (20).
 Note: The distance between transmitter and receiver should be less than two meters for pairing.
Button Function LED Function of massage
1 Drive M1 up (HEAD)
2 Memory timer (SNORE)
3 Drive M2 up (FOOT)
4 Drive M1 down (HEAD)
5 Memory position (ZGRAV)
6 Drive M2 down (FOOT)
7 Under Bed Light on/off
Keep pressed: dimming
9 Flashlight on/off
10 HEAD massage higher level
11 Massage on/off
12 FOOT massage higher level
13 HEAD massage lower level
14 Massage wave
15 FOOT massage lower level
16 Memory position M1
17 SET memory
18 Memory position M2
19 Memory position M3
20 Memory position (FLAT)
8
Button LOCK
1 + 20 Pairing System 1
3 + 20 Pairing System 2
13 + 15 Activate: press & release
17 + 20 Activate: press & hold
c Fast
d Medium
e Slow
FCC Warning:
Any Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment.
ISEDC Warning:
This device complies with Innovation, Science, and Economic Development Canad
licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le présent appareil est conforme aux CNR d' Innovation, Sciences et Développement
économique Canada applicables aux appareils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes :
(1) l'appareil nedoit pas produire de brouillage, et
(2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si
le brouillage est susceptible d'en compromettre le fonctionnement.
The device is compliance with RF exposure guidelines, users can obtain Canadian
information on RF exposure and compliance.
Le présent appareil est conforme Après examen de ce matériel aux conformité ou aux
limites d’intensité de champ RF, les utilisateurs peuvent sur l’exposition aux
radiofréquences et la conformité and compliance d’acquérir les informations
correspondantes.
a
RF1058
CU458-2
c
d
e
b