Instruction Manual DXWP61374 DXWP61379 DXWP61774 DXWP61779 Aluminum Submersible Utility Pump If you have questions or comments, contact us. 1-855-222-3841 customer.service@pedrollo-usa.
ENGLISH Index Content Page # Components 2 Safety Guidelines 3 Description 4 Specifications 4 Installation 5 Operation 5 Maintenance 6 Troubleshooting 6 Performance 7 Parts 8 Notes 9-10 Warranty 11 7 1 1 5 2 2 6 3 3 5 4 Components 1 Handle 2 1-1/2 in. (38.1mm) NPT Discharge 3 Motor 4 Base 5 3/4 in. (19.
ENGLISH Safety Guidelines Carefully read, understand and follow all safety instructions in this manual. Retain this manual for future reference WARNING: Do not expose the pump to freezing temperatures. Discharge lines exposed to freezing temperatures should be positioned with a downward slope to prevent freezing. This is the safety alert symbol. When you see this symbol, look for one of the following signal words.
ENGLISH Description This non-automatic submersible utility pump is designed to remove water from flooded basements, window wells, stock tanks, etc. The permanent split capacitor motor is oil cooled and hermetically sealed for cooler operation. The pump comes equipped with a 3-prong grounding type power cord.
ENGLISH Installation Operation WARNING: Always disconnect the power source before attempting to install, service or perform maintenance on the pump. Failure to do so may result in fatal electrical shock. Always disconnect the power source before servicing pump. 1. Connect the power cord to a 115 volt AC grounded GFCI receptacle. NOTICE: Your pump is designed and built to give you reliable performance and long life. It will pump water for years when properly installed in the right environment.
ENGLISH Maintenance WARNING: Risk of electric shock. Always disconnect the power supply before attempting to install, service or perform maintenance on the pump. WARNING: All repairs must be made by a qualified technician. CAUTION: This submersible pump contains oil which may become pressurized and hot under normal operating conditions – allow the pump to cool for 2-3 hours before servicing. 1. The pump motor is hermetically sealed in the housing and does not require any service.
ENGLISH Performance Height and/or piping restriction will reduce the pump output performance. It is recommended to use the same size or larger pipe as the pump discharge for optimum performance. DISCHARGE HEIGHT ft/m 30ft / 9.14m 25ft / 7.62m Model Number DXWP61374 DXWP61379 20ft / 6.1m DXWP61774 DXWP61779 15ft / 4.65m 10ft / 3.05m 5ft / 1.52m 0 0 20 gal 76 L 40 gal 151 L 60 gal 227 L 80 gal 303 L 100 gal 379 L GALLONS / LITERS PER MINUTE Gallons Per Minute @ Discharge Height Model 0 ft.
ENGLISH Replacement Parts For parts, contact customer support at 855-222-3841 or customer.service@pedrollo-usa.com. Utility Pump Reference 1 1 Description Handle 2 Power Cord 3 Shaft Seal DXWP61374 DXWP61774 ADW100000 ADW100000 F81130030 F81130030 T00900035/6 T00900035/6 4 Impeller 981040227 981040225 5 Adapter G81200151 G81200151 * Motor NA NA DXWP61379 DXWP61779 * *If motor fails, replace entire pump.
Notes: ENGLISH 9
Notes: 10
Limited Warranty: General Terms and Conditions - Cont: Manufacturer warrants the products specified in this warranty to be free from defects in material or workmanship for ten (10) years from date of purchase. During the time period and subject to the terms and conditions, manufacturer will repair or replace to the original user or consumer any portion of this product which proves to be defective due to materials or workmanship.
Dedicated Customer Support 855-222-3841 customer.service@pedrollo-usa.com Live customer support available 7 days a week. Manufactured under license by: Pedrollo Group Inc. 45 Maryland Ave East St. Paul, Minnesota 55117 © 2022 DEWALT. DEWALT®, GUARANTEED TOUGH® and the yellow/black color scheme are trademarks for DEWALT power tools, outdoor equipment, accessories, anchors and concrete adhesives and are used under license. Product may differ from that pictured. Does not affect function.