Instructions / Assembly

If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-844-377-8451 • www.dewalt.com
INSTRUCTION MANUAL GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.
DXSTAH025 Adjustable Shop Stool with Casters Tabouret d’atelier ajustable à roulettes Taburete de taller ajustablecon ruedas
Copyright © 2018 DEWALT.
DEWA LT
®
and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an affiliate thereof
and are used under license. The yellow/black color scheme is a trademark for DEWALT
power tools & accessories.
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113
SAVE THESE INSTRUCTIONS
READ ALL INSTRUCTIONS
BEFORE YOU BEGIN:
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,
CALL US TOLL FREE AT: 1-844-377-8451
WARNING! Read and understand all instructions. This manual contains
important safety and operating instructions. Please read this manual carefully
before assembling this storage rack and save it for reference.
• Read all instructions thoroughly.
• Remove all components from the box, and lay them on the floor in an orderly fashion.
• Wear eye protection.
• Be cautious of sharp edges.
• Do not stand on product. You may fall which may cause personal injury.
• 300 lb weight limit.
• Keep this information for further reference.
(AUG18) Part No. 41562 DXSTAH025 Copyright © 2018, DEWALT
1. Cushion Seat Strut Install (Fig. 1)
• Take the seat strut and install into the top of the upright frame. Be sure to center the seat strut correctly
when installing it and firmly push it in.
2. Cushion Seat and Base Assembly
• Take the base and put it on the bottom of the cushion seat. (Fig. 2)
• Use the (4) Phillips
®
pan head bolts to install the base to the cushion seat. (Fig. 3)
3. Cushion Seat and Base Install (Fig. 4)
• Slip the cushion seat and base onto the seat strut.
• Firmly push down the center of the cushion seat to secure it to the seat strut.
1. Caster Removal (Fig. 5)
• Begin by loosening the nuts on the top of the casters. Holding the top of the caster will assist with removal.
• Once the nut is free, take it off along with the lock washer and flat washer.
• Repeat for the remaining 3 casters.
2. Foot Test (Fig. 6)
• Slip the foot onto the frame.
• Using the hardware from the caster and the supplied bolt, attach the foot to the frame. Do not tighten all
the way at this point.
• Repeat for the remaining 3 legs.
• Place the stool on its 4 legs. Check to see if the stool is level. If it is, tighten all of the bolts to the feet. If
not, move on to step 3.
3. Level Adjustments (Fig. 7)
• Shims (3 included) will be used to make adjustments to level the stool. These shims are to be placed on
the legs before the foot installation if removing the casters. If the casters are not level, the same shims can
be placed at the bottom of the steel leg after the caster has been removed—be sure to align the shim
with the existing frame prior to the caster nut being tightened.
• In order to use a shim, disassemble the feet that require adjustments. Then, place a shim followed by the
foot, and bolt it together.
• Once more, check to make sure the stool is level. If not, repeat process.
Seat Strut and Cushion Seat Instructions (Fig. 1-4)
Foot Assembly Instructions (Fig. 5-7)
Definitions: Safety Guidelines and Words
This instruction manuals use the following safety alert symbols and words to alert you
to hazardous situations and your risk of personal injuery or property damage.
Indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
WARNING:
Indicates a potentially hazardous situation which, if not avoided, may
result in minor or moderate injury.
CAUTION:
(Used without word) Indicates a safety related message.
Indicates a practice not related to personal injury which, if not avoided,
may result in property damage.
NOTICE:
FIG. 1
FIG. 5
FIG. 2
FIG. 6
FIG. 3
FIG. 7
FIG. 4
UPRIGHT
FRAME
(4)
PHILLIPS
®
PAN HEAD
BOLTS
(4)
PHILLIPS
®
PAN HEAD
BOLTS
BASE
BASE
BASE
SEAT STRUT
CUSHION
SEAT
CUSHION
SEAT
CUSHION
SEAT
SEAT
STRUT
CASTER
FOOT
FOOT
SHIM
BOLT
BOLT
NUT
NUT
NUT
LOCK
WASHER
LOCK
WASHER
LOCK
WASHER
LEG
LEG
LEG
FLAT
WASHER
FLAT
WASHER
FLAT
WASHER
Two Year Limited Warranty
DEWALT stools are backed by a two year limited warranty. This warranty covers manufacturer defects and
workmanship. The warranty excludes misuse or abuse and normal wear and tear. Exclusion is not allowed in some
states and may not apply. This warranty gives you specific legal rights, and you may have other rights, which vary
from state to state. For further detail of warranty coverage, call 1-844-377-8451.
In addition to the warranty, DEWALT stools are covered by our:
90 Day Money Back Guarantee
If you are not completely satisfied with the performance of your DEWALT Stool for any reason, you can return it
within 90 days from the date of purchase with a receipt for a full refund – no questions asked.
Latin America
This warranty does not apply to products sold in Latin America. For products sold in Latin America, see country
specific warranty information contained in the packaging, call the local company or see website for
warranty information.
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113
CONSERVER CES CONSIGNES
POUR TOUTE QUESTION OU REMARQUE AU SUJET DE CET OUTIL OU DE TOUT AUTRE
OUTIL DEWALT, COMPOSEZ LE NUMÉRO SANS FRAIS: 1-844-377-8451.
Avertissement ! Lire et comprendre toutes les directives.
Ce manuel contient des consignes de sécurité et d’utilisation importantes.
Veuillez lire attentivement ce manuel avant d’assembler cette étagère de
rangement et le conserver à titre de référence.
(AUG18) Part No. 41562 DXSTAH025 Copyright © 2018, DEWALT
DEWA LT
®
et le logo DEWALT sont des marques de commerce de DEWALT Industrial Tool Co. ou d’une
société affiliée à cette dernière et sont utilisés sous licence. L’agencement de couleurs jaune et noir est une
marque de commerce des outlils électriques et accessorires DEWALT.
Les définitions ci-dessous décrivent le niveau de danger pour chaque mot indicateur
employé. Lire le mode d’emploi et porter une attention particulière à ces symboles.
indique une situation potentiellement dangereuse qui, si elle n’est
pas évitée, pourrait entraîner la mort ou des blessures graves.
.
indique une situation potentiellement dangereuse qui, si elle n’est pas
évitée, pourrait entraîner des blessures légères ou modérées
(Si utilisé sans aucun terme) Indique un message propre à la sécurité.
indique une pratique ne posant aucun risque de dommages corporels
mais qui par contre, si rien n’est fait pour l’éviter, pourrait poser des risques de
dommages matériels.
AVIS :
Définitions : Règles de sécurité
LIRE TOUTES LES CONSIGNES
• Veuillez lire attentivement toutes les instructions.
• Retirez tous les éléments de la boîte et placez-les sur le sol defaçonordonnée.
• Portez des lunettes de protection.
• Faites attention aux bords tranchants.
• Ne vous mettez pas debout sur le produit. Vous risqueriez de tomber et de vous blesser.
• Limite de poids de 300 lb (136 kg).
• Conservez ces renseignements pour consultation ultérieure.
AVANT DECOMMENCER :
1. Fixation du montant du siége á coussin (Fig. 1)
• Prenez le montant du siège et fixez-le sur le châssis droit. Veillezàcentrer correctement le montant du
siège lors du montage et à l’enfoncer fermement.
2. Assemblage du siége á coussin et de la base
• Prenez la base et placez-la en-dessous du siège à coussin. (Fig. 2)
• Utilisez les (4) boulons à tête cylindrique Phillips
®
pour fixer labase au siège à coussin. (Fig. 3)
Instructions pour le montant du siége et le siége á coussin (Fig. 1-4)