Full Product Manual

ManualsBrandsDEWALT ManualsShelvingAdjustable Leveling Floor Mounting Plate Kit for Industrial Storage Rack (4-Pack)

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-844-377-8451 • www.dewalt.com

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

DXSTA04MP

4 Pack Mounting Plate

Ensemble de 4 plaques de montage

Placas de montaje, paquete de 4

DEWA LT

and the DEWALT Logo are trademarks of the DEWALT Industrial Tool

Co., or an afﬁliate thereof and are used under license. The yellow/black color

scheme is a trademark for DEWALT power tools & accessories.

JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113

SAVE THESE INSTRUCTIONS

READ ALL INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Parts List

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR

ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-844-377-8451

WARNING! Read and understand all instructions.

This manual contains important safety and operating

instructions. Please read this manual carefully before

assembling this storage rack and save it for reference.

Technical Specifications

DXST10000 Total Capacity 10,000 lb (4,435.9 kg)

*when weight is evenly distributed

DXST10000 Capacity per Shelf 2,500 lb (1,133 kg)

*when weight is evenly distributed

DXST4500 and DXST4500-W Total

Capacity

4,500 lb (2,041.2 kg)

*when weight is evenly distributed

DXST4500 and DXST4500-W

Capacity per Shelf

1,500 lb (680 kg)

*when weight is evenly distributed

Adjustable Height 7" (17.78 cm)

No. Description Qty.

1 Mounting Plate

2 Upright Beam Support Bracket

3 Securing Tab

4 Securing Nut

5 Concrete Wedge Anchor

These feet are to be used with your DEWALT DSXT10000,

DXST4500 or DXST4500-W industrial rack. The maximum weight

capacities of these racks cannot be exceeded.

WARNING:

Serious or fatal crushing injuries can occur from

shelving tipping over. To prevent this, the rack must be secured to a

wall, especially in earthquake-prone environments, where surfaces are

uneven, and where children and/or pets are present.

GENERAL SAFETY

• Keep work area clean and dry.

• Use correct/recommended tools for the job.

• Never leave tools unattended.

• Never force a part into place.

• Wear safety apparel.

• Wear safety glasses/goggles.

• Keep small parts away from children. Never leave a small children

unattended while assembling.

• Always use common sense – your personal safety is your responsibility.

SPECIFIC SAFETY FOR WALL MOUNT BRACKET

BEFORE YOU BEGIN:

Deﬁnitions: Safety Guidelines

The deﬁnitions below describe the level of severity for each signal word. Please

read the manual and pay attention to these symbols.

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

CAUTION:

(Used without word) Indicates a safety related message.

Indicates a practice not related to personal injury which, if not avoided,

may result in property damage.

NOTICE:

• This manual contains important safety and assembly instructions.

• Read all instructions thoroughly and follow them with the use of

this product.

• Remove all components from the box, and lay them on the floor in

an orderly fashion.

• Wear eye protection.

Summary of content (6 pages)

PAGE 1
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. DXSTA04MP 4 Pack Mounting Plate Ensemble de 4 plaques de montage Placas de montaje, paquete de 4 JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113 (APR18) Part No. 41568 DXST10000 Total Capacity 10,000 lb (4,435.
PAGE 2
FIG. 4 • Be cautious of sharp edges. • Ensure that the rack is level. • Keep this information for further reference. LOOSEN/ TIGHTEN SECURING NUTS TO ROTATE OR ADJUST HEIGHT OF MOUNTING PLATES Assembly Instructions (Fig. 1-3) NOTE: Having an assistant to help install the mounting plates to the rack makes the process safer and easier. NOTE: It is recommended that all (4) mounting plates are used during installation. 1.
PAGE 3
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113 (APR18) Part No. 41568 DXSTA04MP Copyright © 2018, DEWALT DEWALT® et le logo DEWALT sont des marques de commerce de DEWALT Industrial Tool Co. ou d’une société afﬁliée à cette dernière et sont utilisés sous licence. L’agencement de couleurs jaune et noir est une marque de commerce des outlils électriques et accessorires DEWALT.
PAGE 4
FIG. 1 FIG. 6 FIG. 2 SUPPORT DE LA POUTRE VERTICALE (PLAQUETTES VERS LE HAUT) CORRECT : LE GOUJON DOIT DÉPASSER DE TROIS FILS OU PLUS POUTRE VERTICALE PLAQUETTE DE FIXATION ÉCROU DE FIXATION PLAQUE DE MONTAGE GOUJON PLAQUE DE MONTAGE FIG. 3 Fixation de la plaque de montage (Fig. 7) FACE ARRIÈRE DE LA POUTRE VERTICALE ÉCROU DE FIXATION REMARQUE : Suivez les procédures convenant à l’utilisation d’ancrages à cale pour béton afin de fixer les plaques de montage au sol.
PAGE 5
JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113 (APR18) Part No. 41568 DXSTA04MP Copyright © 2018, DEWALT DEWALT® y el logotipo de DEWALT son marcas comerciales de DEWALT Industrial Tool Co., o una ﬁlial del mismo y se usan bajo licencia. El gráﬁco de color negro y amarillo es una maca registrada para las herramientas eléctricas y los accesorios de DEWALT. Definiciones: Normas de seguridad Las siguientes definiciones describen el nivel de gravedad de cada palabra de señal.
PAGE 6
FIG. 1 FIG. 6 FIG. 2 MÉNSULA DEL SOPORTE DE LA VIGA VERTICAL (LENGÜETAS HACIA ARRIBA) BUENO: EL PERNO PASANTE DEBE SOBRESALIR POR TRES O MÁS HILOS VIGA VERTICA ASEGURAR LENGÜETA TUERCA DE SEGURIDAD PLACA DE MONTAJE PERNO PASANTE PLACA DE MONTAJE ADVERTENCIA: Asegúrese de que la estantería esté nivelada. Se pueden producir lesiones graves o la muerte por el vuelco de la estantería sobre una persona. FIG. 3 PARTE POSTERIOR DE LA VIGA VERTICAL ASEGURAR LA TUERCA Fijacíon de la placa de montage (Fig.