Warranty

ManualsBrandsDEWALT ManualsGarage Shelving1-Drawer Storage/Worktop Add-On Kit for 4 ft. Industrial Storage Rack

If you have questions or comments, contact us.

Pour toute question ou tout commentaire, veuillez nous contacter.

Si tiene dudas o comentarios, contáctenos.

1-844-377-8451 • www.dewalt.com

INSTRUCTION MANUAL

GUIDE D’UTILISATION

MANUAL DE INSTRUCCIONES

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA

DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES

DE USAR EL PRODUCTO.

DXST4500WTD

Worktop Drawer for DXST4500 Industrial Rack

Tiroir plan de travail pour étagère industrielle DXST4500

Cajonera con superficie de trabajo para estanterías industrial DXST4500

DEWA LT

and the DEWALT Logo are trademarks of the DEWALT Industrial Tool Co., or an afﬁliate thereof

and are used under license. The yellow/black color scheme is a trademark for DEWALT power tools

& accessories.

JS PRODUCTS | 6445 MONTESSOURI STREET, LAS VEGAS, NV 89113

SAVE THESE INSTRUCTIONS

TECHNICAL SPECIFICATIONS

Parts List

IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT THIS OR ANY DEWALT TOOL,

CALL US TOLL FREE AT: 1-844-377-8451

WARNING! Read and understand all instructions. This

manual contains important safety and operating instructions.

Please read this manual carefully before assembling this storage

rack and save it for reference.

Technical Specifications

Total Capacity for Worktop Surface 1000 lb (453.59 kg)

*when weight is evenly distributed

Drawer Capacity 120 lb (54.43 kg)

*when weight is evenly distributed

Worktop Drawer Exterior Dimensions Width: 44.13" (112.09 cm)

Height:

8.27" (21.01 cm)

Depth: 19.12" (48.56 cm)

Drawer Interior Dimensions Width: 41.02" (104.19 cm)

Height:

5.47" (13.89 cm)

Depth: 18.43" (46.81 cm)

No. Description Qty.

1 Pre-Assembled Drawer

2 Drawer Pull

3 Left Mounting Bracket

4 Right Mounting Bracket

5 Mounting Bracket Bolt

6 Locking Pin

7 Push Pin

8 4 mm Hex Key

9 4 mm Hex Bit

NOTE: DXST4500 Industrial Racks and DXST4500PBK Pegboards are sold separately.

GENERAL SAFETY

• Keep work area clean and dry.

• Use correct/recommended tools for the job.

• Never leave tools unattended.

• Never force a part into place.

• Wear safety apparel.

• Wear safety glasses/goggles.

• Never crawl, sit, stand, or climb on the Worktop Drawer.

• Never crawl, sit, stand, or climb on the rack.

• Never overload the Worktop Drawer.

• Do not leave drawer open.

• Keep small parts away from children. Never leave small children unattended while assembling.

• Always use common sense – your personal safety is your responsibility.

Deﬁnitions: Safety Guidelines

The deﬁnitions below describe the level of severity for each signal word. Please

read the manual and pay attention to these symbols.

Indicates a potentially hazardous situation which, if not avoided, could

result in death or serious injury.

WARNING:

Indicates a potentially hazardous situation which, if not avoided, may

result in minor or moderate injury.

CAUTION:

(Used without word) Indicates a safety related message.

Indicates a practice not related to personal injury which, if not avoided,

may result in property damage.

NOTICE:

WARNING:

Serious injury or death can occur from the rack tipping over. To prevent this, the rack must

be secured to the wall, especially in earthquake-prone areas, or where surfaces are uneven, and where children

and/or pets are present. For added safety we recommend also mounting the rack to the floor using DEWALT part

number DXSTA04MP (sold separately).

NOTE: The Worktop Drawer can be mounted at different levels on the DXST4500 Industrial Rack series for

multi-functional organization.

NOTE: See images below for different Worktop Drawer mounting options.

SPECIFIC SAFETY FOR WALL MOUNT BRACKET

Worktop Drawer Configurations

*Workbench Setup with 2-DXST4500, 1-DXST4500PBK, and

1-DXST4500WTD

*Shelf Replacement Setup

NEVER EXCEED THE FOLLOWING WEIGHT LIMITS

FOR THIS WORKTOP DRAWER

• Maximum load for worktop surface is 1000 lbs (453.59 kg) when weight is evenly distributed.

• Maximum load of the drawer is 120 lbs (54.43 kg) when weight is evenly distributed.

WARNING:

READ ALL INSTRUCTIONS

BEFORE YOU BEGIN:

• Read all instructions thoroughly.

• Remove all components from the box, and lay them on the floor in an orderly fashion.

• Wear eye protection.

• Be cautious of sharp edges.

• Keep this information for further reference.

Summary of content (4 pages)

PAGE 1
DXST4500WTD Worktop Drawer for DXST4500 Industrial Rack Tiroir plan de travail pour étagère industrielle DXST4500 Cajonera con superficie de trabajo para estanterías industrial DXST4500 INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO. INSTRUCTION MANUAL GUIDE D’UTILISATION MANUAL DE INSTRUCCIONES 1-844-377-8451 • www.dewalt.com If you have questions or comments, contact us.
PAGE 2
WARNING: Serious injury or death can occur from the rack tipping over. To prevent this, the rack must be secured to the wall, especially in earthquake-prone areas, or where surfaces are uneven, and where children and/or pets are present. For added safety we recommend also mounting the rack to the floor using DEWALT part number DXSTA04MP (sold separately). Définitions : Règles de sécurité Les définitions ci-dessous décrivent le niveau de danger pour chaque mot indicateur employé.
PAGE 3
. Le support en L comporte deux séries de quatre trous carrés qui vous permettent d’ajuster la distance entre l’étagère et le mur. Utilisez deux boulons de carrosserie et deux écrous de 10 mm pour fixer le support en L à la partie inférieure du support en U. (Fig. 7) 6 3 4. Placez l’étagère de façon à ce que l’extrémité plate du support en L soit en contact avec le mur. À l’aide d’un crayon, marquez l’emplacement des quatre trous sur le mur.
PAGE 4
LEA TODAS INSTRUCCIONES • Utilice gafas/lentes de seguridad. • Nunca gatee, se siente, se pare o se suba al cajón de la encimera. • Nunca se arrastre, se siente o se ponga de pie sobre una estantería ni se suba a ella. • Nunca sobrecargue el cajón de la encimera. • No deje el cajón abierto. • Mantenga las piezas pequeñas fuera del alcance de los niños. Nunca deje a un niño pequeño sin supervisión durante el ensamblado.