Specification

VLL

FALL PROTECTION

VERTICAL LIFELINE SYSTEM

DXFP100050

Polysteel Rope - Snap Hook With Taped End - 50 FT (15 M)

VERTICAL LIFELINE

SPECIFICATIONS

RELEVANT STANDARDS

WARRANTY

WARNINGS

·Read, understand and follow all labels and instructions prior to use.

·Inspect before each use.

·Remove from service if there is evidence of damage or excessive wear.

ABRASION RESISTANT: Polysteel rope resists abrasion

and water for extended use.

STRENGTH & DURABILITY: Alloy steel snap hook with

zinc plating for high strength and long life.

STRENGTH: Meets OSHA and ANSI standards for 3,600

lb. (16kN) gate. Minimum breaking strength 5,000 lbs

(23kN).

Capacity: 310 lbs. (141 kg)

Size: 5/8 In. (16 mm.) Thick, 50 ft (15 M.) Long

Weight: 7.8 lbs. ( 3.54 Kg.)

Material: Galvanized Alloy Steel Snap Hook with Silver or Golden

passivation, High strength Polysteel Twisted Rope

Meets ANSI Z359.1-2007, OSHA 1910.66, OSHA 1926.502

2 YEAR LIMITED WARRANTY

BENEFITS AND FEATURES

The DEWALT 50 ft. (15 m) Polysteel Vertical Rope Lifeline

has a diameter of 5/8” (16mm) with a Locking Snap

hook on the anchor end with the other end being cut and

taped.

TECHNICAL DATA SHEET

FALL PROTECTION P/N TDSDXFP100050 Rev.A 09/16/2022

Maximum Breaking Strength: 5,000 lbs. (23 kN.)

PAGE 1
TECHNICAL DATA SHEET FALL PROTECTION VLL VERTICAL LIFELINE Polysteel Rope - Snap Hook With Taped End - 50 FT (15 M) DXFP100050 BENEFITS AND FEATURES The DEWALT 50 ft. (15 m) Polysteel Vertical Rope Lifeline has a diameter of 5/8” (16mm) with a Locking Snap hook on the anchor end with the other end being cut and taped. ABRASION RESISTANT: Polysteel rope resists abrasion and water for extended use. STRENGTH & DURABILITY: Alloy steel snap hook with zinc plating for high strength and long life.