www. .
Copyright DeWALT 2
Figure 1 q a d b dd q c e kk f s i DW771 j cc y g p k l ff o h m n Figure 2 r x w dd z bb aa y ee v a5 kk v t ff v u 1
Figure 3 hh Figure 4 ii jj kk ll ii oo nn mm mm Figure 5 Figure 6 pp nn rr qq Figure 7 Figure 8 bb aa z b Figure 9 ss gg h e f g 2 Figure 10 q
Figure 11 Figure 12 e uu vv tt n Figure 13 Figure 14 n yy i p m o ww l Figure 16 Figure 15 h a3 ee t p xx 3
Figure 17 Figure 18 a3 t h ee xx Figure 19 Figure 20 a4 a2 u a1 a2 Figure 21 4 Figure 22 zz
Figure 24 Figure 23 Figure 25 1 kk Figure 26 2 Figure 27 3 5
E ngli s h DW771, DW777 Cross-cut Mitre Saw Congratulations! You have chosen a DeWALT tool. Years of experience, thorough product development and innovation make DeWALT one of the most reliable partners for professional power tool users. Technical Data Voltage V (U.K. & Ireland only) V Type Power input W Blade diameter mm Blade bore mm Max. blade speed min-1 Mitre (max. positions) left and right Bevel (max.
Engli sh Save this manual for future reference General Safety Rules 1. Keep work area clear. Cluttered areas and benches invite injuries. 2. Consider work area environment. Do not expose the tool to rain. Do not use the tool in damp or wet conditions. Keep the work area well lit (250 - 300 Lux). Do not use the tool where there is a risk of causing fire or explosion, e.g., in the presence of flammable liquids and gases. 3. Guard against electric shock. Avoid body contact with earthed surfaces (e.g.
Engli sh • Do not wedge anything against the fan to hold the motor shaft. – Impairment of hearing. • The blade guard on your saw will automatically raise when the arm is brought down; it will lower over the blade when head lock up release lever (b) is pushed. – Risk of accidents caused by the uncovered parts of the rotating saw blade. • Never raise the blade guard manually unless the saw is switched off. The guard can be raised by hand when installing or removing saw blades or for inspection of the saw.
Engli sh o. Mitre scale • Safely dispose of the old plug. p. Sliding fence • Connect the brown lead to the live terminal in the plug. q. Dust extraction nozzle • Connect the blue lead to the neutral terminal. Warning: No connection is to be made to the earth terminal. r. Traverse lock s. Guard lock up hook t. Bevel clamp handle Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 13 A. u. Bevel scale v. Bench mounting holes Fitting a Mains Plug to 115 V Units (U.K.
Engli sh 2. Loosen the blade bolt (f) by turning clockwise. Remove the blade bolt (f) and the outer flange (e). 3. Press the lower guard lock up release lever (b) to raise the lower blade guard (g) and remove the saw blade (h). 4. Install the new saw blade onto the shoulder provided on the inner flange (gg) making sure that the teeth at the bottom edge of the blade are pointing towards the fence (away from the operator). 5.
Engli sh Warning: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set-ups or when making repairs. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury. The attention of UK users is drawn to the “woodworking machines regulations 1974” and any subsequent amendments.
Engli sh 15 20 25 30 35 40 45 SQUARE BOX 65 80 10 75 5 70 0 85 45 Dust Extraction (fig. 1, 6) 40 50 35 45 35 40 6 SIDED BOX 30 65 75 30 35 70 80 85 30 25 50 25 65 45 20 20 40 55 60 70 80 20 75 85 55 60 25 35 50 45 15 15 30 40 10 15 25 35 30 8 SIDED BOX 20 25 15 20 15 5 10 5 5 5 10 15 20 5 5 10 0 10 10 ANGLE OF SIDE OF BOX (ANGLE"A") SET THIS MITER ANGLE ON SAW 55 60 40 25 30 35 40 45 SET THIS BEVEL ANGLE ON SAW 1.
Engli sh Warning: To reduce the risk of injury, regularly clean the table top. Warning: To reduce the risk of injury, regularly clean the dust collection system. Optional Accessories Warning: Since accessories, other than those offered by DeWalt, have not been tested with this product, use of such accessories with this tool could be hazardous. To reduce the risk of injury, only DeWalt, recommended accessories should be used with this product. Using the Roller Table (fig.
Belgique et Luxembourg België en Luxemburg Black & Decker - DeWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DeWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DeWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.
