INSTRUCTION MANUAL DCF680-XE 7.
Vibration total values (triax vector sum) determined according to EN 60745: Definitions: Safety Guidelines Vibration emission value ah Screwdriving without impact ah = Uncertainty K = The definitions below describe the level of severity for each signal word. Please read the manual and pay attention to these symbols. DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury.
SAVE ALL WARNINGS AND INSTRUCTIONS FOR FUTURE REFERENCE 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. b) Use personal protective equipment. Always wear eye protection.
Electrical Safety d) Store idle power tools out of the reach of children and do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users. e) Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and any other condition that may affect the power tool’s operation. If damaged, have the power tool repaired before use. Many accidents are caused by poorly maintained power tools.
• The label on your tool may include the following symbols. The symbols and their definitions are as follows: V ................... volts A ......................amperes Hz ................. hertz W .....................watts ..................alternating current min ............... minutes or DC .. direct current or AC/DC...alternating or direct current ................ Class I Construction no ....................no load speed ..................... (grounded) n ......................rated speed ...........
• Contents of opened battery cells may cause respiratory irritation. Provide fresh air. If symptoms persist, seek medical attention. WARNING: Burn hazard. Battery liquid may be flammable if exposed to spark or flame. • DO NOT splash or immerse in water or other liquids. • Do not store or use the tool and battery pack in locations where the temperature may reach or exceed 40 °C (105 °F) (such as outside sheds or metal buildings in summer). For best life store battery packs in a cool, dry location.
Charging Procedure (Fig. 1) • Do not use an extension cord unless it is absolutely necessary. Use of improper extension cord could result in risk of fire, electric shock or electrocution. • When operating a charger outdoors, always provide a dry location and use an extension cord suitable for outdoor use. Use of a cord suitable for outdoor use reduces the risk of electric shock.
c. Move the charger and battery pack to a location where the surrounding air temperature is approximately 18 ° – 24 °C (65 °F and 75 °F); d. If charging problems persist, take the tool, battery pack and charger to your local service center. 5. The battery pack should be recharged when it fails to produce sufficient power on jobs which were easily done previously. DO NOT CONTINUE to use under these conditions. Follow the charging procedure.
COMPONENTS (Fig. 2) INTENDED USE This cordless screwdriver is designed for professional fastening applications. DO NOT use under wet conditions or in presence of flammable liquids or gases. This cordless screwdriver is a professional power tool. DO NOT let children come into contact with the tool. Supervision is required when inexperienced operators use this tool. WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. A. Motion control activation trigger F.
OPERATION For more information regarding fuel gauge battery packs, please contact Stanley Black & Decker, 82 Taryn Drive, Epping, VIC 3076 Australia or call 1800 338 002 or (NZ) 0800 339 258. WARNING: To reduce the risk of serious personal injury, turn the tool off and disconnect the battery pack before making any adjustments or removing/installing attachments or accessories. An accidental start-up can cause injury. To Operate Your screwdriver uses gyroscopic technology to sense your hand motion.
Cleaning VARIABLE SPEED • The spindle speed is dependent upon the speed that you rotate your hand. • The slower you rotate your hand, the slower the screwdriver turns. • The faster you rotate your hand, the faster the screwdriver turns. • If you wish to increase the spindle speed, rotate your hand further in the same direction.
11
DEWALT BATTERY AND CHARGER SYSTEMS Cat. Number Voltage Amp Hour DC9360 DE0240-XJ DW0242 DW0240 DC9096 DC9180 DCB180 DCB181 DCB182 DCB183 DW9096 DE9095-XJ DC9091 DC9144 DCB141 DCB142 DCB143 DE9094 DE9091-XJ DW9091 DC9071 DE9071-XJ DE9074-XJ DW9050 DW9071 DW9072 DCB120 DCB123 DW9063 DW9062 DW9061 DW9048 DCB080 DW9057 DW9046 Chargers/Charge Time Output Nominal Battery 36 24 24 24 18 18 18 18 18 18 18 18 14.4 14.4 14.4 14.4 14.4 14.4 14.4 14.4 12 12 12 12 12 12 10.8 10.8 9.6 9.6 9.6 9.6 7.2 7.2 7.2 2.
