www. .
Copyright DEWALT 2
Figure 1 b d e n f g c a m h i j D25323 b f n c a g m h d e j D25223 i c d n k f f g a m h e i j l D25313 k D25324 1
Figure 2 d d D25313, D25323, D25324 e e D25223 Figure 4 Figure 3 f g i 2
Figure 6 Figure 5 c j h Figure 7 3
EN GLI S H HEAVY-DUTY ROTARY HAMMERDRILL D25313, D25223, D25323, D25324 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage (U.K.
ENGLISH The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745 and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure. WARNING: The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications, with different accessories or poorly maintained, the vibration emission may differ.
EN GLI S H 2) ELECTRICAL SAFETY a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions.
ENGLISH 5) SERVICE a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure that the safety of the power tool is maintained. Additional Specific Safety Rules for Rotary Hammers • Wear ear protectors. Exposure to noise can cause hearing loss. • Use auxiliary handles supplied with the tool. Loss of control can cause personal injury.
EN GLI S H 1 Side handle 1 Depth adjustment rod 1 Kitbox 1 Keyless chuck (D25324 only) 1 Instruction manual 1 Exploded drawing • Check for damage to the tool, parts or accessories which may have occurred during transport. • Take the time to thoroughly read and understand this manual prior to operation. Description (fig. 1) WARNING: Never modify the power tool or any part of it. Damage or personal injury could result. a. Variable speed switch b. Active vibration control (D25223, D25323 and D25324 only) c.
ENGLISH When using a cable reel, always unwind the cable completely. ASSEMBLY AND ADJUSTMENTS WARNING: To reduce the risk of injury, turn unit off and disconnect machine from power source before installing and removing accessories, before adjusting or changing set-ups or when making repairs. Be sure the trigger switch is in the OFF position. An accidental start-up can cause injury. Selecting the Operating Mode (fig.
EN GLI S H 3. Rotate the side handle to the desired position and tighten the handle. Setting the Drilling Depth (fig. 5) 1. Insert the required drill bit as described above. 2. Press the depth stop clamp (j) and keep it depressed. 3. Fit the depth adjustment rod (h) through the hole in the depth stop clamp. 4. Adjust the drilling depth as shown. 5. Release the depth stop clamp. Forward/reverse Slider (fig. 6) 1. Push the forward/reverse slider (c) to the LH-side for forward (RH) rotation.
ENGLISH 2. To stop the tool, release the switch. 3. To lock the tool in the off position, move the forward/reverse slider (c) to the central position. Hammerdrilling (fig. 1) DRILLING WITH A SOLID BIT 1. Set the mode selector switch (d) to the hammerdrilling position. 2. Insert the appropriate drill bit. NOTE: For best results use high quality carbidetipped bits. 3. Adjust the side handle (i) as required. 4. If necessary, set the drilling depth. 5. Mark the spot where the hole is to be drilled. 6.
EN GLI S H • This machine is not user-serviceable. Take the tool to an authorised DEWALT repair agent after approximately 40 hours of use. If problems occur before this time contact an authorised DEWALT repair agent. • The tool will automatically switch off when the carbon brushes are worn. Motor Brushes DEWALT uses an advanced brush system which automatically stops the drill when the brushes wear out. This prevents serious damage to the motor.
ENGLISH GUARANTEE DEWALT is confident of the quality of its products and offers an outstanding guarantee for professional users of the product. This guarantee statement is in addition to and in no way prejudices your contractual rights as a professional user or your statutory rights as a private non-professional user. The guarantee is valid within the territories of the Member States of the European Union and the European Free Trade Area.
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.
