www. .
Copyright DEWALT 2
Figure 1 c d l g f k h a b j e i Figure 2 d e 1
Figure 4 Figure 3 f g m i Figure 5 Figure 6 c j h 2
Figure 7 3
EN GLI S H HEAVY-DUTY ROTARY HAMMERDRILL D25103 Congratulations! You have chosen a DEWALT tool. Years of experience, thorough product development and innovation make DEWALT one of the most reliable partners for professional power tool users. Technical Data Voltage (U.K.
ENGLISH WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury. NOTICE: Indicates a practice not related to personal injury which, if not avoided, may result in property damage. Denotes risk of electric shock. Denotes risk of fire.
EN GLI S H f) If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 3) PERSONAL SAFETY a) Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.
ENGLISH • Wear safety goggles or other eye protection. Hammering operations cause chips to fly. Flying particles can cause permanent eye damage. Wear a dust mask or respirator for applications that generate dust. Ear protection may be required for most applications. • Keep a firm grip on the tool at all times. Do not attempt to operate this tool without holding it with both hands. It is recommended that the side handle be used at all times. Operating this tool with one hand will result in loss of control.
EN GLI S H f. Tool holder g. Dust cover h. Depth adjustment rod i. Side handle j. Depth stop clamp INTENDED USE These heavy-duty rotary hammers have been designed for professional drilling and hammerdrilling, screwdriving and light chipping DO NOT use under wet conditions or in presence of flammable liquids or gases. WARNING: No connection is to be made to the earth terminal. Follow the fitting instructions supplied with good quality plugs. Recommended fuse: 3 A.
ENGLISH Indexing the Chisel Position (fig. 2) The chisel can be indexed and locked into 52 different positions. 1. Rotate the mode selector switch (d) until it points to the “bit rotation” position. 2. Rotate the chisel in the desired position. 3. Set the mode selector switch (d) to the “hammering only” position. 4. Twist the chisel until it locks in position. Inserting and Removing SDS Plus® Accessories (fig. 3) This tool uses SDS Plus® accessories (refer to the inset in fig.
EN GLI S H • Be aware of the location of pipework and wiring. 6. Place the drill bit on the spot and switch on the tool. • Apply only a gentle pressure to the tool (approx. 5 kg). Excessive force does not speed up drilling but decreases tool performance and may shorten tool life. 7. Always switch off the tool when work is finished and before unplugging. • Do not drill or drive too deep to prevent damage to the dust cover. • Always hold the tool firmly with both hands and ensure a secure stance (fig. 7).
ENGLISH 6. When the screw is flush with the workpiece, release the variable speed switch to prevent the screw head from penetrating into the workpiece. Lubrication Chipping and Chiselling (fig. 1) Your power tool requires no additional lubrication. 1. Set the mode selector switch (d) to the “hammering only” position. Accessories and attachments used must be regularly lubricated around the SDS Plus® fitment. 2. Insert the appropriate chisel and rotate it by hand to lock it into one of 52 positions. 3.
EN GLI S H Separate collection of used products and packaging allows materials to be recycled and used again. Re-use of recycled materials helps prevent environmental pollution and reduces the demand for raw materials. Local regulations may provide for separate collection of electrical products from the household, at municipal waste sites or by the retailer when you purchase a new product.
13
Belgique et Luxembourg België en Luxemburg Black & Decker - DEWALT Nieuwlandlaan 7, IZ Aarschot B156 B-3200 Aarschot Tel: +32 (0)015 - 15 47 9211 Fax: +32 (0)015 - 15 47 9210 www.dewalt.be Danmark DEWALT Sluseholmen 2-4 2450 København SV Tlf: 70201511 Fax: 70224910 www.dewalt.dk Deutschland DEWALT Richard-Klinger-Straße 65510 Idstein Tel: 06126-21-1 Fax: 06126-21-2770 www.dewalt.de Ελλάς Black & Decker (Hellas) S.A.