d — premier USER MANUAL
US ER M A N UA L Congratulations! You’ve just acquired the most ambitious and innovative product in the world of hi-fi, the D-Premier amplifier with hybrid technology . The D-Premier will provide you with the most amazing listening experiences. Share them, discover new music, more than ever your pleasure is the driving force behind our innovation. Devialet strives to reach exellence with simplicity of use in mind.This manual contains all the information you need to setup and use your D-Premier.
What’s included in your d-premier package • D-PREMIER • REMOTE DEVICE (BATTERIES INCLUDED) • POWER CABLE • USER MANUAL • WARRANTY BOOK • MICROFIBER WIPE • TEMPLATE FOR VERTICAL MOUNTING • HEX KEY (TO CHANGE BATTERIES IN THE REMOTE DEVICE) SOURCE INVERT BASS USER MANUAL — 02
D-Premier set-up D-Premier can be placed horizontally, or mounted on the wall in a vertical position. To mount it vertically, use the template provided. It indicates the positioning of fixing points on the wall, the type of screws as well as assembly instructions. The slots beneath the unit’s feet are designed to lock the D-Premier in place using appropriate screws. The screen will automatically rotate when D-Premier is vertically mounted. Do not cover the D-Premier to ensure proper cooling.
Connecting sources & speakers Remove the protective film from the D-Premier top panel. Connect your sources and speakers. Then connect the D-Premier to the AC power supply using the mains cord provided. Note that earth is required. We recommend the use of the digital inputs (for a CD-player for instance). E A N B C O D P F H G I J K Q L M R All the connecting ports are located at the rear of the amplifier, recessed under the rear panel. To remove the rear panel, slide it horizontally.
B SD CARD SLOT — FOR THE CONFIGURATION OF THE AMPLIFIER C OPTICAL INPUTS — FOR CD, DVD, COMPUTER OR PORTABLE DIGITAL PLAYERS… D E J N SD CARD / SET-UP A F OPTICAL 1 & 2 TOSLINK® LINE 2 / PHONO (MC/MM) * INPUTS RIGHT (R) AND LEFT (L) FOR TURNTABLE (MM) LINE 1 * INPUTS RIGHT (R) AND LEFT (L) FOR CD, DVD, COMPUTER, … G DIGITAL 2 * H DIGITAL 1 * I AES/EBU K RIGHT SPEAKER & LEFT SPEAKER L RS-232 M MAINS 100-120/220-240V O HDMI IN & OUT P GROUND FOR PHONO Q RADIO AERIAL R TRIGGER
Getting started & instructions To turn on your D-Premier, press the main power button on the front panel . Hold the remote device about 30cm from the amplifier and turn the main volume dial to activate it.
D-Premier control screen The control screen indicates by default the volume level (from -97,5dB to +30dB) as well as the source selected. Successive tapping on the button 3 allows you to change the desired source. The analogue sources always appear in black. The connected digital sources appear in black or, in orange when there are no signals.
Customise your D-Premier The included SD card allows you to customise or configure the inputs (phono settings, subwoofer activation,multiamplification, etc.) as well as upgrading the software. Turn off the amplifier, eject the SD card located at the rear of the amplifier. Insert the SD card in your computer. Go to our website www.devialet.com and follow the instructions under the ‘Customising D-Premier’ section.
Once your upgrade or new settings are saved, insert your SD card back into the D-Premier. Turn on the unit, the screen will indicate that the new settings are loading, this process is automatic and may take a few minutes to complete. When the operation is processed, you may turn on the newly configured unit.
Changing batteries on your D-Premier’s remote device D-Premier’s remote operates with tow AAA batteries LR03 1,5V (provided with the product); life span is about 2 years (please recycle your used batteries). The battery compartment is located at the back of the remote. To access the batteries, unscrew the back panel using the hex key provided. Insert the new batteries and replace the back panel. Then get started again (see p.
Technical specifications d-premier — MAXIMUM POWER: 2x240W - SPEAKER IMPEDANCE RANGE: 8 TO 2 — 600W SWITCHED-MODE POWER SUPPLY — D/A CONVERTER T.I. PCM 1792 192kHz/24 bits — COLOR SCREEN — INTERNAL IR SENSOR — THD+N AT FULL POWER: 0.001% — IMD SMTPE: 0.001% — SNR: 130 dB UNWEIGHTED — THERMAL DISTORTION: UNMEASURABLE — OUTPUT IMPEDANCE <0,001 — EFFICIENCY >85% — MAXIMUM POWER CONSUMPTION: 600W — SLEEP MODE POWER CONSUMPTION: <5W OVERALL DIMENSIONS: 400X400X44.5MM CARVED OUT ALUMINUM BOX — WEIGHT: 6.
