USER’S MANUAL YINLIFUN-Handheld Label Printer
Printer Guide Uncover Button Hand Strap Indicator Light Power Button/Function Button Power Port Note: We recommend use power adapter which gets CCC certificated and meets standard requirements.
Printer Parameters Description Parameters Description Parameters Print Mode Thermal Line Connect Mode Bluetooth ( Android, iOS ) Dimension 80*80*32mm Standard Accessories Printer, User’s Manual, USB cable Weight 150g Print Resolution 203 dpi Label Width Max Width 15mm Display Mode RGB Indicator Light Standby Time 1 year ( power off ) Temperature 0℃~45℃ Charge Time 1 hour Charge Mode USB 5V Battery Capacity 450mAh*7.
Download APP Scan to download APP Basic Operation 1. Push uncover button to open cover 2. Insert YINLIFUN label tape, close cover to fasten up.
3. Long press power button to turn the printer on. 4. Use APP to connect with YINLIFU printer, set label size. 5. Choose template of label you buy. Choose label template Double click to enter contents 6. Edit label contents then tap print.
Fault Diagnosis 1. Printer feeds out label only, no data is printed. Check APP demopage if printing is normal. If demopage works, please check label tape or APP. If not, it means printer breaks down. 2. Vague printing Check print darkness, default value is 6 brings better effect. If a line appears or printing goes blank without any data, please check if print head gets dirty and clean it with alcohol. 3.
Warnings Please make sure label cartridge is clean before using printer. Dirty label cartridge may damage print head, please clean cartridge and print head by alcohol. Please turn off printer immediately when it breaks down. Please do not disassemble by yourself because complex circuit and device inside this printer. Please charge printer in a cool and ventilated place. Please do not expose printer and power adapter to high temperature, high humidity or in the water.
Safety Notices We recommend use power adapter which gets CCC certificated and meets standard requirements. Please do not disassemble by yourself; Do not open paper cover during printing process; Print head is still heated, do not touch it after the printing process, be aware of getting scalded. Please put printer and power adapter in a room-temperature and ventilated place.