Product Description

Classification:
Restricted
System/Product:
DigiShot 600
Document Ref:
BVC-00056
Revision:
1
Document Type:
BVC-BuildVerControl
Current Author:
Morgan Lombard
Title:
Build control document for DigiShot 600
Original Author:
Barry Labuschagne
Page:
Page 1 of 3
APPROVER APPROVER SIGNATURE SIGNATURE DATE ISSUE DATE
Abrie Liebenberg
X
Si
g
ned b
y
: AJ Liebenber
g
2021/11/16 2021/11/16
Approved documents are only valid if they contain an “APPROVED” stamp on the first page and both the revision number and the issue date of the document correspond with the
electronic document control system.
1 PRODUCT DESCRIPTION
This document describes the necessary building blocks, special instructions, software specifications and
test procedures necessary to assemble and test the DS600 Commander. Please refer to the correct
subparagraph for the appropriate system.
2 PRODUCT HIERARCHY
Main System 4G
Architecture Name DS600
Derivative 4G Method
3 ELECTRONIC BUILDING BLOCK CONFIGURATION
The following table describes the electronic document packs to build the product.
Part Name Document No
Issue
(Reliance
rev. no.
)
MOD
Status
Note Link
CE4 Commander Main PCB EDP-00127 8
CE4 Commander Powerlock PCB EDP-00147 7 1
CE4 Commande
r
IO Module EDP-00183 8
CE4 Commande
r
UI PCB EDP-00146 8 1
CE4 Commande
r
Base PCB EDP-00163 3
CE4 Commande
r
NFC PCB EDP-00179 4
CE4 Commande
r
LCD Heater PCB EDP-00191 2
Antenna Board 900 MHz EDP-00158 1
Narrowband RF module with LNA EDP-00209 3 1
Narrowband RF module with LNA EDP-00241 4 1
1. Use the RF module that is appropriate for the Country/Region.
APPROVED