Instruction Manual

Made in China
Input: 1A/5V. Output: 300mA/4.25V. Voltage: 3.7V.
Current: 300mA. Power: 3.7Wh
Made in Dongguan KongXing Industry Company LTD.
The Fifth Industrial Zone, Xiegang Town, Dongguan,
Guangdong, China
Distributed by Bungie Aerospace Corporation,
550 106th Ave NE, Bellevue WA 98004 / Brand
Access LLC, Joop Geesinkweg 501, 1114A
B
Am
sterdam-Duivendrecht, Niederlande.
[phone]. [e-mail].
FCC ID：2A2JI-50125861
Please note that changes or modification not expressly
approved by the party responsible for compliance
could void the user’s authority to operate equipment.
CAUTION: Risk of electric shock. This product is not
a toy and is not intended for use by children. For adult
use only. Do not plug in extension cords, indoor use
only. For safe use, plug only into exposed wall outlets
where the console is ventilated and cannot contact
materials that may present a fire hazard.
NOTE: This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against
harmful interference in a residential installation. This
equipment generates uses and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experienced radio TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
Hive Ghost Stand: Made in Dongguan KongXing
Industry Company LTD. The Fifth Industrial Zone,
Xiegang Town, Dongguan, Guangdong, China
Hive Ghost:
Distributed by Bungie Aerospace Corporation,
550 106th Ave NE, Bellevue WA 98004 / Brand
Access LLC, Joop Geesinkweg 501, 1114AB
Amsterdam-Duivendrecht, Niederlande.
[phone].
Made in China
PSYCHOMETER
The Psychometer is a specialty device hacked together by
Hidden operatives in order to hear "memories" associated
with objects. This device reads invisible energies associated
with objects. The Hidden believe these energies are connected
to the Darkness. When properly tuned and paired with a
resonant object, the Psychometer can detect and play back
sounds and voices linked to the object's past. The device isn't
perfect. It offers only shaky access to these energies, so
sometimes the sounds are difficult to hear or incomplete.
INSTRUCTION MANUAL
Power up the Psychometer by charging it using the
supplied USB cord and connecting it to a power
source. Once the battery is fully charged, the charge
indicator will turn from red to green on the back of the
device.
Insert the UF antenna and turn the power dial to on by
rotating it to the right. You are able to adjust the
volume of the device using this knob as well.
After the Psychometer has cycled through its internal
tests, the indicator lights will be off except for the single
"ready" light closest to the power dial. The device is
now ready for use.
Place any artifact on top of the frequency coils and use
the three adjustment knobs on the left to home in on
any memories to extract from the artifact. Most
artifacts can be placed directly onto the coils; however,
the Hive Ghost requires the insertion of the clear
support arm to provide stability and places it within the
optimum sensory range of the Psychometer. Please
insert the support arm into the center of the
Psychometer, and then place the Hive Ghost onto the
top of the arm - a black ring has been added to the
support arm to aid in insertion into the Hive Ghost.
As you adjust the frequency modulators for each
artifact, the indicator lights on the right will start to light
up, the closer you get to unlocking a memory. When
all four indicator lights are lit, you have dialed in the
correct frequency, and any message will be played.
To power down the Psychometer, rotate the volume
knob on the right to the far left and remove the antenna
for storage.