Stackable Horizontal Organizer Assembly Instructions 3668 / 3669 / 3674 / 3675 Tools Needed: 01- 3685 7/17
SAFETY PRECAUTIONS WARNING • This unit contains small parts which could be a choking hazard for small children. Children should be under adult supervision at all times or serious injury could occur. • Always unload unit prior to moving the unit. The weight of personal belongings can cause the unit to become unstable and either tip or collapse. Serious bodily injury and/or damage to personal belongings may occur. • Do not overload unit.
HELPFUL HINTS We recommend you protect your work surface during assembly to prevent scratching or damage to table tops, wood floors, etc. finished edge unfinished edge Unfinished edges are shaded in gray. It is important to understand how finished edges go together. Take a moment to lay out all the wood pieces and note the finished and unfinished (raw wood) edges. Arrange pieces so all finished edges are facing the same way.
HARDWARE (H1) x 2 dowel (H3) x 8 assembly screw #5mm x 38mm DESCRIPTION A side panel 2 B shelf 2 (H2) x 8 screw cover (H4) x 2 hole plug QUANTITY (H5) x 1 L-bracket B A B A (H6) x 1 L-bracket screw #10 x 1/2” flathead (H7) x 1 wall screw #10 x 1-1/2” Just call 1-800-874-0008 for parts and service. For faster service, have the style number ready when calling.
STEP 1 A B A (H3) x 4 assembly screw #5mm x 38mm 1. See “helpful hints” on page 7 for aligning finished and unfinished edges. 2. Use screws (H3) to attach side panels (A) to shelf (B).
STEP 2 B B (H3) x 4 assembly screw #5mm x 38mm 1. 6 Attach second shelf (B) to side panels (A) with four screws (H3).
STEP 3 for stacking or (H1) x 2 dowel 1. 2. 3. or for single unit (H2) x 8 screw cover or (H4) x 2 hole plug For single unit: Insert hole plugs (H4) into top holes. For stacking units: Insert dowels (H1). Push screw covers (H2) onto all screw heads.
STEP 4 wall stud B top panel Top panel (H5) x 1 L-bracket (H6) x 1 L-bracket screw #10 x 1/2” flathead (H7) x 1 wall screw #10 x 1-1/2” Wall stud Mount L-bracket underneath each top shelf (B) for stacking. 1. Read L-bracket detailed instructions on page 8 then align unit with wall stud. 2. Place short end of L-bracket (H5) against wall/wall stud. Uses 1-1/2” screw (H7) to secure L-bracket to wall stud. 3. Use 1/2” screw (H6) to secure L-bracket to top panel (B).