(MODEL NUMBER:AC-21750)
COUPLING COVER FLAT WASHER (see Fig 3) (see Fig 4) OUTLET BOX (see Fig 5) RECEIVER RED WIRE PURPLE WIRE GREY WIRE BLUE WIRE WHITE WIRE GREEN WIRE
HANGER BRACKET SCREW SCREW 2. Connect the red wire from receiver to the red wire from fan with wire nut .Connect the purple wire from receiver to the purple wire from fan with wire nut.Connect the blue wire from receiver to the blue wire from fan with wire nut.Connect the grey wire from receiver to the grey wire from fan with wie nut. Connect the white wire from receiver to the white wire from fan with wire nut.
LIGHT KIT ADAPTER SCREW 1. Remove three screws from the light kit adapter. (see Fig.11) LIGHT KIT ADAPTER LIGHT KIT PLATE 2. Lift the light kit plate up to light kit adapter and pull the light wire through the hole of light kit adapter. (see Fig.12) PLUG&PIN LIGHT KIT PLATE 3. Tighten screws (see fig.13) SCREW 4.Remove the three outside screws from the light kit plate. (see Fig.14) 5. Plug fan wires to light kit wires. (see fig.15) LIGHT KIT PLATE SCREW 6. Tighten the 3 screws . (see fig.16) 7.
TNA15111007
REMOTE CONTROL SETTING AND OPERATION TRANSMITTER OPERATION Remove the battery cover from the remote control transmitter and install batteries, Replace the cover. Note : Use 2 1.5V/AAA batteries (included). Note : If not using for long period of time, remove battery to prevent damage to remote transmitter, and store the remote transmitter away from excess heat or humidity.
Remote Control Fan Speed And Light Functions. Fan speed 1 = minimum speed 2 = low speed 3 = medium low speed 4 = medium speed 5 = medium high speed 6 = high speed This button turns the fan off. Forward/ Reverse button- This button controls the direction of the fan rotation. Press once to change direction of the fan rotation. Fan must be running to reverse. (Note: It can take a few seconds to change direction once button has been pushed.) Light button-Press this button to turn light on or off.