MeshWorks® shelving ll Parts List ! Do not throw away packaging materials until assembly is complete. 1 To clean, wipe with a soft, dry cloth. Spot clean with a damp cloth if needed. ee Mesh Shelf Pole Leveling Foot By Shelf Clip Plastic Cap Double Threaded Insert (D) 8 clips (16 pieces) {x4 {Fy x4 Step 1 Screw a leveling foot (C) into the bottom of each pole. (Bottom of pole has a larger space between the end of the pole and the first groove.
Step 3 g With the unit fully assembled, press a plastic & cap (5) into the hole in the top of each pole. To level your assembled unit, adjust the feet by twisting to the desired height Connecting Multiple Units n If desired, you may use the double threaded [1 Ll inserts included with your MeshWorks® M shoe shelf to stack multiple units on top of H M one another. Simply remove the plastic caps H nl | from the top of your assembled unit and I nl insert the four Double Threaded Inserts into the holes.
MeshWorks® shilling ll Ne jetez pas les emballages tant que le montage n'est pas terminé. Pour le nettoyage, utilisez un chiffon doux et sec. Enlevez les taches avec Liste des pièces un chiffon humide si nécessaire = Retapage Mes Are Pied réglable Wx2 Pince de fixation Capuchon en plastique Double insert fileté (D) 8 pinces (16 pinces) {E) x4 x4 Étape 1 Vissez un pied réglable (C) en dessous de chaque barre.
Étape 3 & Dés que le module est entièrement assemblé, insérez un capuchon en plastique dans le trou en haut de chaque barre. Pour égaliser le niveau de votre module, ajustez le pied en tournant jusqu’a la hauteur souhaitée. Assembler plusieurs modules M I Si vous le souhaitez, vous pouvez utiliser les [1 doubles inserts filetés fours avec votre tapager 4 chaussures MeshWorks® pour superposer H plusieurs modules 'un sur I'autre.