Test report no. 20012010 EUT: DERMALOG FLC1 Page 1 of 25 FCC ID: 2APZCFLC1 FCC Title 47 CFR Part 15 Date of issue: 2020-06-18 Annex acc. to FCC Title 47 CFR Part 15 relating to DERMALOG Identification Systems GmbH DERMALOG FLC1 Annex no. 4 User Manual Functional Description Title 47 - Telecommunication Part 15 - Radio Frequency Devices Subpart C – Intentional Radiators ANSI C63.4-2014 ANSI C63.10-2013 Date: 2019-11-20 Created: Trepper Reviewed: Ftouhi TÜV NORD Hochfrequenztechnik GmbH & Co.
Test report no. 20012010 EUT: DERMALOG FLC1 Page 2 of 25 FCC ID: 2APZCFLC1 FCC Title 47 CFR Part 15 Date of issue: 2020-06-18 User Manual / Functional Description of the test equipment (EUT) Date: 2019-11-20 Created: Trepper Reviewed: Ftouhi TÜV NORD Hochfrequenztechnik GmbH & Co. KG LESKANPARK, Gebäude 10, Waltherstr. 49-51, 51069 Köln, Germany Released: Hittig-Rademacher Vers. No. 3.19 Tel.
User Guide DERMALOG FLC1 Version 1.
This page is intentionally left blank.
COPYRIGHTS AND PROPRIETARY NOTICE Copyrights and proprietary notice Hardware documentation: Copyrights © 2004-2020 of DERMALOG Identification Systems GmbH. All rights reserved. This hardware documentation is property of DERMALOG Identification Systems GmbH. The documentation or parts thereof may in no way be copied, distributed or translated, neither in electronic, manual, optical nor any other manner, unless prior approval by DERMALOG Identification Systems GmbH.
REVISION HISTORY Revision history Document Version Date Author Changes 1.0 2020-03-27 DERMALOG Initial document 1.1 2020-03-30 DERMALOG Minor changes 1.
TABLE OF CONTENTS Table of contents Revision history.............................................................................................................................4 Introduction ..................................................................................................................................6 1 Audience ...........................................................................................................................7 2 Document conventions .........................
INTRODUCTION Introduction The DERMALOG FLC1 captures facial images and detects the body temperature of a person. This user guide describes the DERMALOG FLC1. It gives information on safety instructions, technical data, product description, installation, maintenance and disposal.
AUDIENCE 1 Audience This document is provided for users of the DERMALOG FLC1. Any person working with the DERMALOG FLC1 must have previously read this document. 2 Document conventions TERMS AND DEFINITIONS Term Definition capture The method of taking a biometric sample from an end user.
SAFETY INSTRUCTIONS 3 Safety instructions IMPORTANT READ CAREFULLY BEFORE USE KEEP FOR FUTURE REFERENCE These safety instructions must be read and understood prior to installation and operation by any person working with the DERMALOG FLC1. Keep these instructions always readily available at the DERMALOG FLC1. Also pay attention to any warning messages shown by DERMALOG software, to any signs or labels on the DERMALOG FLC1 and to any further DERMALOG instructions shipped with the DERMALOG FLC1. 3.
SAFETY INSTRUCTIONS If transported by air, store the DERMALOG FLC1 in hermetic and heated compartments so that environmental conditions comply with the technical data (see chapter 5). STORAGE The environmental conditions during storage must meet the conditions specified in the technical data section (see chapter 5). The air of the location where the DERMALOG FLC1 is stored must not contain corrosive or active substances. 3.4 Positioning and environment Only use the DERMALOG FLC1 indoors.
SAFETY INSTRUCTIONS 3.6 Operation Make sure all people working with the DERMALOG FLC1 have read and understood this user guide and received a thorough training. The DERMALOG FLC1 contains a camera of the Intel® RealSenseTM D400 series. The Intel® RealSenseTM D400 series is classified as Class 1 Laser Product under the EN/IEC 60825-1, Edition 3 (2014) internationally and IEC60825-1, Edition 2 (2007) in the US. This product complies with US FDA performance standards under 21 CFR 1040.
SAFETY INSTRUCTIONS 3.7 Maintenance Never disassemble, modify, repair, remove parts or open the housing of the DERMALOG FLC1, unless expressly authorized by DERMALOG. Disregarding this warning can result in serious damage to the DERMALOG FLC1 and will cause the loss of any warranty. If you need to return the DERMALOG FLC1 for repair, use a suitable packing material to avoid further damage (preferrably the original packing material).
DELIVERY PACKAGE CONTENT 4 Delivery package content The delivery package contains: DERMALOG FLC1 USB 3.0 cable (USB-C to USB-A, 1 m length) Unless otherwise expressly agreed, download the purchased software from the DERMALOG Support Center (https://support.dermalog.com).
TECHNICAL DATA 5 Technical data The technical data of the DERMALOG FLC1 are listed in Table 6. Technical Features Sensors Thermal sensor RGB sensor 3D sensor Detection accuracy of body temperature ± 0.5 °C Measuring speed 0.7 - 2 s Weight 130 g Dimensions 120 mm x 37 mm x 23 mm Interface USB 3.0 SDK .
PRODUCT DESCRIPTION 6 Product description The DERMALOG FLC1 is intended to capture facial images and to detect the body temperature of a person. 6.1 6.1.1 Hardware General views Figure 2, Figure 3 and Figure 4 show different views of the DERMALOG FLC1. color camera infrared projector infrared camera thermal camera Figure 2: Front view of the DERMALOG FLC1 UNC 1/4“-20 thread for mounting the DERMALOG FLC1 on a a suitable mount, e.g.
PRODUCT DESCRIPTION USB 3.0 cable Figure 4: Back view of the DERMALOG FLC1 6.1.2 Dimensions Figure 5 shows the dimensions of the DERMALOG FLC1. Figure 5: Dimensions of the DERMALOG FLC1 6.2 Available software products The DERMALOG FLC1 is operated with the DERMALOG Fever Detection Application. For detailed information on the DERMALOG Fever Detection Application, see the separate document DERMALOG Fever Detection Application User Guide.
INSTALLATION 7 Installation Before commissioning the DERMALOG FLC1 perform the following steps: Position the DERMALOG FLC1 see chapter 7.1 Connect the hardware see chapter 7.2 Install the software package see chapter 7.3 Calibrate the DERMALOG FLC1 see chapter 7.4 7.1 Position the DERMALOG FLC1 Only use the DERMALOG FLC1 indoors. Place the DERMALOG FLC1 on a suitable mount, e.g. a tripod. Observe the recommended temperature range for the DERMALOG FLC1 to operate (see chapter 5).
INSTALLATION The DERMALOG FLC1 is positioned at the person’s eye level. The distance between the person and the DERMALOG FLC1 is between 0.5 m and 2 m. 7.2 Connect the hardware Prerequisites: You comply with the safety instructions (see chapter 3). You have positioned the DERMALOG FLC1 according to chapter 7.1 If you want to connect the DERMALOG FLC1 via a USB hub, always use a self-powered (active) hub. START: STEP 1 Check the DERMALOG FLC1 and the USB cables for damages and breaks.
MAINTENANCE 7.3 Install the software package For information on the installation of the software package, see the separate document DERMALOG Fever Detection Application User Guide. 7.4 Calibrate the DERMALOG FLC1 For information on the calibration, see the separate document DERMALOG Fever Detection Application User Guide. 8 Maintenance The DERMALOG FLC1 does not need regular maintenance, but the device must be checked regularly for external damage.
TERMS OF WARRANTY 10 Terms of Warranty 1. As to the products (the “Products”) provided by DERMALOG, DERMALOG’s warranty should be as follows: 1.1. DERMALOG warrants that all hard- and software were produced with due care and diligence. However, it is agreed that it is not possible in accordance with the state of the art to rule out technical errors under all application conditions.
ORDERING INFORMATION 11 Ordering information For ordering information, please contact DERMALOG via sales@dermalog.com.
This page is intentionally left blank.
More information: Internet Receive further Information on our company website www.dermalog.com Head Office DERMALOG Identification Systems GmbH Mittelweg 120 20148 Hamburg Germany Tel: +49 (0) 40 41 32 27 0 Fax: +49 (0) 40 41 32 27 89 info@dermalog.com Berlin Office DERMALOG Identification Systems GmbH Kronenstrasse 1 10117 Berlin Germany Dubai Office DERMALOG FZE Business Center, Al Shmookh Building UAQ Free Trade Zone Umm All Quwain, U.A.E.
DERMALOG FLC1 Compliance Statement Compliance Statement for Part 15 of the FCC Rules: Model Name / PMN: DERMALOG FLC1 FCC ID: 2APZCFLC1 HVIN: 8036-0001-01 FVIN: 1.1.0 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.