Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 PHOS 20 / LAP 20 LED PROJECTOR INSTRUCTION MANUAL ___________________________________________________________________________ info@derksen.com | DERKSEN USA | www.derksen.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Thank you for deciding to buy this high quality product. The PHOS 20 / LAP 20 LED projector is built exclusively in Germany and therefore incorporates the typical German high standards of quality and safety. We hope you enjoy many fascinating hours with your new projector! To use the machine effectively and safely please read the instruction manual carefully first.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Diagram 1: A look at the machine and titles of the important parts lens ring, turn to focus the projected image lens tube cooling element base power plug ___________________________________________________________________________ info@derksen.com | DERKSEN USA | www.derksen.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 1. Installation What you should note before installation: 1. The projector can be set up on a flat, level surface without a permanent fixture or it can be fixed to a wall or ceiling. 2. A permanent fixture should only be made by qualified personnel. 3. The machine weighs 2.8 kg so ensure the wall, ceiling or the construction intended to hold it is stable enough to support a weight of at least 12 kg. 4.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Fixed installation of the LED projector 1. Switch the projector on and decide on the precise place you want the machine to be fixed to give the desired optimal result. 2. Mark the eventual position on the floor, wall or ceiling. 3. Switch the machine off and disconnect it from the mains. 4. Remove the mounting plate by removing the 3 side screws. 5.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 2. Set Up and Operation Placement of the glass gobo Individual glass gobos can be created according to your own design and ordered directly from Derksen USA. Glass gobos are made from heat resistant, metal coated glass and dichroic color filters. They hold their colors for a long time even when in constant use and come with a manufacturer’s 5 year guarantee. 1.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Focusing the projected image The PHOS 20 / LAP 20 LED projector is suitable for projecting images over distances ranging from 0.5 to 3 meters increasing in darkness up to 8 meters. 1. Turn the lens ring until the projected image is sharply defined on the chosen backdrop. 2. Attention: The lens ring should not be turned so far out that the groove at the end of the lens tube becomes visible. W 3.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Care to be taken when connecting to the power supply - - W Ensure the voltage of the electricity supply system and the voltage of the machine are compatible. To this end take note of the typed stickers on the machine. The power cable must not be damaged. Ensure no strain or pressure is put on the cable. The cable shouldn't be twisted, bent, frayed or clamped.
Instruction Manual PHOS 20 / LAP 20 LED Projector Version 1.3, English Tuesday, 19 April 2011 Specifications: item: PHOS 20 / LAP 20 body: weight: on / off switch: voltage: power consumption: light source: projection distance in room light: projection distance in darkness: average lifetime of the light source: color temperature in °Kelvin: luminosity of the light source in Lumen: gobo size / image size: aluminum 2.
Onl yi nDar k nes s Di s t anc e
