Instructions / Assembly

ASSEMBLY INSTRUCTION
Folding Stool
©2022 Deny Designs
?
Contact [e-mail]
STEP 1
Locate the loop on either end of the fabric.
Insert a retaining rod into the loop until it is
entirely encased. Repeat for other side.
STEP 2
With the retaining rods in place, locate the
grooves on the outside top of each leg.
Push the legs together and hold the fabric
corner at in front of you. Take the upper
left corner of the fabric and insert it into the
right side of the frame groove. Only push it
in a small distance for now. You will need to
make sure you are pushing both fabric and
rod together as the fabric can get caught in
the groove.
STEP 3
After completing the previous step, wrap
the fabric over the top of the frame to-
wards the other groove. You will need to
repeat STEP 2 on this side. After the fabric
has been inserted a short distance, slowly
push both sides at the same time until the
fabric sits properly in the middle of the
gap. in the frame.
Folding Stool is rated for up to 125 lbs (56 kg).
Please do not stand on this stool.
WHAT’S INCLUDED
1 x wooden frame 2 x retaining rods 1 x piece of fabric