Digital Set Top Box Operating Manual DVBT-11 Digital video broadcasting REMOTE Digital Terrestrial Receiver DVB-T PLAYER Before connecting, operating or adjusting this product, please read this user's manual carefully and completely.
Table of Contents Contents Table of Contents P1 Safety Precautions P2 Before Use(Continued) P2 Chapter 2-2 Initial OSD Setting Chapter 2-3 Convenient Functions Identification of Controls P3-P5 Main Unit P3 Remote control unit P4 Insert the battery P5 Chapter 2-1 First Time Installation First Time Installation 1 P5 P5 Technical Specification P6-P16 P16-P18 P19
Safety Precautions Safety Precautions Always read the safety instructions carefully Keep this User s Manual for future reference Keep this equipment away from humidity Lay this equipment on a reliable flat surface before setting it up. Do not stand it on soft furnishings. If any of the following situation arises, get the equipment checked by a service technician: 1.The equipment has been exposed to moisture. 2.The equipment has been dropped and damaged. 3.The equipment has obvious sign of breakage. 4.
Identification of Controls Main Unit ON / OFF BUTTON UP DOWN CHANNELS (Used to switch the set top box on and off) (Used to change channels with out using the remote control) DVB WORKING INDICATOR (Used to visually show when the set top box is turned on) Digital video broadcasting REMOTE Digital Terrestrial Receiver REMOTE CONTROL SENSOR (Used to receive the signal from the remote control) RF IN (This socket connects to your external aerial) VCR SCART IN ANT COAXIAL MAINS CABLE (This socket con
Identification of Controls Chapter 2-1 First Time Installation Insert the battery First Time Installation No channels are stored in your unit. A First Time Installation Wizard will appear automatically on the screen. Continue with the OSD (On-Screen-Display) to do the following setting. 1 A First Time Installation Wizard appears. Press¡° select¡°YES¡±. Refer to the drawing, take the back cover of the remote control off and remove the empty battery receptacle.
Chapter 2-2 Initial OSD Setting Chapter 2-2 Initial OSD Setting-continued Main Menu A. Program List Most of the Settings of your DVB player can be done by following the OSD instructions (*Main Menu). For details on how to set up by using your remote control, please refer to Chapter 5: Remote Control Guide. A-1 TV Program Editing Before editing your TV program, make sure you have finished with program search, which should be done by completing the First Time Installation Wizard.
Chapter 2-2 Initial OSD Setting-continued Program edit table The following table is present in the TV Program Editing and Music Program Editing menus. You may freely set your favorite program list, switch program numbers, and delete an existing program. Switch Program Setting Step 1. In the Program edit table, press ¡° button to highlight ¡°Move¡± section. Pr og ra m edit table No. 1 2 3 4 5 6 7 8 P r ogr am Name FTV TTV -1 TTV -2 ST V Step 3.
Chapter 2-2 Initial OSD Setting-continued In Advance: Once the programs are deleted, there is no way to add them back. To watch those deleted programs, you will need to do Program Search again. Please note that by doing so, your previous program list will be replaced. *To return to the up level MENU ---Press ¡°EXIT¡± button. *To finish the setup operation ---Press menu to exit from Main Menu screen. B.
Chapter 2-2 Initial OSD Setting-continued B. Program Search C Parental Control B-2 Manual Search You can locate specific programs by selecting frequency numbers. This function allows you to lock the programs that you do not want your children to view. For example, if you set the selected program to be locked, then the program can't be watched unless the correct PIN code is entered. 1 Under Main Menu, press¡° ¡°Program Search¡±. 2 Under Program Search, press¡° select ¡°Manual Search¡±.
Chapter 2-2 Initial OSD Setting-continued C Parental Control-continued a. Channel Lock Channel Lock allows the parents to prevent younger members of the family to watch.Any channel can be ¡°locked¡± so that it cannot be selected for viewing without a 4-digit PIN code being entered. In this way, any channel not suitable for younger viewers can be protected. If you want to lock the current channel you are watching, select ¡°YES¡± and then press¡° ¡±to lock the channel.
Chapter 2-2 Initial OSD Setting-continued D. System Setting MAIN MENU System Setting TV standard Display type Video output Antenna power Regional setting Main Me nu Sys tem Set ti ng Di spl ay T y pe 4: 3 PS 4:3 4:3 4: 3 LB 16: 16:9 9 C. 16:9 Wide Select ¡°16:9¡± for a wide-screen TV set. *Played in ¡°FULL¡± size. Setting the wide-screen TV to ¡°FULL¡± mode is also necessary. Each screen shows an example when the video material for a widescreen is played. Language Time setting system schedule a.
Chapter 2-2 Initial OSD Setting-continued D-3 Antenna Power MAIN MENU If you are using passive Antenna Power, set Antenna Power to ¡°OFF¡±; if you are using active Antenna Power, set Antenna Power to ¡°ON¡±. 1 Under Main Menu, press¡ ¡°System Setting¡±. 2 Under System Setting, press¡ Power¡±. ° button ¡ / ¡° ± 3 Press¡ initiate antenna power.
Chapter 2-2 Initial OSD Setting-continued D-6 OSD Language/Audio Language/Teletext language 1:Under main MENU,press¡° ¡±button and¡° OK ¡±button to select¡°system setting¡±. 2:Under¡°system setting¡±,press¡° OK ¡±button to select ¡°system schdule¡±. 3:Press¡° ¡± ¡° ¡± button to select Task. *To return to the MAIN MENU ---Press¡°EXIT¡± button. *To finish the setup operation ---Press MENU to exit from Main Menu screen. In advance: Audio language / DVB subtitle is not avaliable on all channels.
Chapter 2-2 Initial OSD Setting-continued E. Game This section provides you bonus games for extra fun and enjoyment. D-1 Game selecting 1 ¡±button and¡° Under Main Menu, press¡° select ¡°Game¡±. 2 Press¡° ¡±button/¡° OK OK ¡±button to ¡±button to select one game to play. Program list Program search Parental control System setting Game(not for sale) Accessory Personal style Accessory *To return to the MAIN MENU ---Press ¡°EXIT¡± button.
Chapter 2-2 Initial OSD Setting-continued F3 System update G-2 Transparency Level This function allows you to set the level of transparency of your OSD menu frames. Accessory 1 Under Main Menu, press¡° to select¡°Personal Style¡±. System Information Factory Default System update This function is reserved: System update 2 Under Personal Style, press¡° to select ¡°Transparency Level¡±.
Chapter 2-2 Initial OSD Setting-continued Chapter 2-3 Convenient Functions G-3 Border Pattern Fast Preview 7 The DVB-T player provides you fast preview of live broadcasts from each TV channel. You can use this function to take a fast preview at all the TV programs in advance of watching it in full screen. 1 *To return to the MAIN MENU ---Press ¡°EXIT¡± button. *To finish the setup operation ---Press MENU to exit from Main Menu screen.
Chapter 2-3 Convenient Functions Audio Channel You can select the preferred audio channel and sound mode. 1 Press screen. AUDIO
Chapter 2-3 Convenient Functions-continued *To exit from this page ---Press INFO button. Favorite PR (Favorite Program) There are some channels that you tend to watch more often and some only occasionally. Favorite PR allows the most-watched channels to access more easily, leaving less watched channels acces-sible but out of way. Language setting LANG Press¡°¡¡¡¡¡±,you can set the OSD language / Audio language / DVB subtitle.
Technical Specification Power Supply Input Voltage 110-240V AC 50Hz. Power Consumption Maximum 10W,Standby 5W. Decoder Video Formats SD,4:3/16:9 Switchable. Audio Format MPEG Layer I&II,32/44.1/48Khz. Video Output CVBS ,RGB(default) Connection Main Power Cable Fixed Type. Tuner 1 Antenna Input/1 RF Output. Scart 1 for VCR/1 for TV(Loopthrough). SPDIF 1 Coaxial.