Instruction Manual DSS-200 R 5.1 Power Amplified Home Theatre Speaker System w/ Remote Control R Read this manual carefully to get the excellent acoustics from this unit.
SPECIFICATIONS SAFETY INFORMATION 20. L/R Balance (Stereo)........................................................ 1.5dB CAUTION Size and Net Weight: RISK OF ELECTRIC SHOCK DO NOT OPEN 21. Size Of Subwoofer (WxHxD).........................200x335x400(mm) ! 22. Size Of Front Speaker (DxH)................................F86x1050(mm) 23. Size Of Centre Speaker (DxH).................................
IMPORTANT SAFEGUARDS SPECIFICATIONS Caution: Please read carefully all the following important safeguards to ensure safe operation. 1. Power Supply.........................................................AC 230V/50Hz 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 3. Input Sensitivity (Subwoofer)...................................60mV 20mV 2.
TROUBLE SHOOTING IMPORTANT SAFEGUARDS 5. REAR SPEAKER SILENT (1) Check whether the system is connected correctly with the Rear speaker. (2) Check whether the system is connected correctly with the audio source. (3) Check whether 2.1CH is selected as audio output. (4) Check whether 3.1CH is selected as audio output. SUPPLEMENT To improve the effect of the system, please note the following when you connect the DVD player as the audio input. 1. When 5.
FRONT PANEL - CONTROLS AND FUNCTIONS R SURR. B 2CH 1 2 3 4 5 SURR. A 5.1CH MUTE STANDBY INPUT SURROUND VOL- AC-3 5.1 R E A D Y VOL+ 5.1 R E A D Y REMOTE SENSOR 1. 2CH: 2 Channel Input Indicator. 2. 5.1CH: 5.1 Channel Input Indicator. 3. INPUT Button. 4. SURROUND: Surround Sound Decoder. 11 10 9 8 7 6 TROUBLE SHOOTING 1. NO OUTPUT (1) Check whether the system is connected correctly. (2 ) Check whether the Volume is set at minimum. Adjust it accordingly.
OPERATING INSTRUCTION - MAIN UNIT the Rear Right Speaker output and STANDBY indicator (9) will light up and flash. 2. Press RR - button (37) on the remote controller to minimize the Rear Right Speaker output and STANDBY indicator (9) will light up and flash. REAR PANEL - CONTROLS AND FUNCTIONS 12 13 14 15 2CH R 17 2. Press INPUT button (25) on the remote controller to shift the status for audio input to 5.1CH channels input. 18 2. MUTE indicator (9) on the front panel will then light up and flash.
REAR PANEL - CONTROLS AND FUNCTIONS 17. AC Power Cord. 18. Power On/Off Switch. 19. 5.1CH Rear Left Audio Input. OPERATING INSTRUCTION - MAIN UNIT SURROUND Mode SURR. A Indicator SURR. B Indicator 3.1CH Stereo On Off 5.1CH Off On 5.1CH (Strengthened) On On 20. 5.1CH Front Left Audio Input. 21. 5.1CH Front Right Audio Input. 22. 5.1CH Rear Right Audio Input. SETTING UP THE ALUMINIUM DIE-CASTING SPEAKERS Remove the base, aluminium speakers, screws, and rubber feet from the packaging.
OPERATING INSTRUCTION - MAIN UNIT SYSTEM CONNECTION INSTRUCTION 2. Press the BASS - button (32) on the remote controller to minimize the Bass output. Standby Indicator (9) on the front panel will light up and flash when the Bass Output is decreased to Minimum accordingly. 2CH 5.1CH INPUT L R W RL FL C RR FR SPEAKER OUTPUT D. TREBLE Selection 1. Press the TREBLE + button (39) on the remote controller to maximize the Treble output.
SYSTEM CONNECTION INSTRUCTION Use the SPEAKER OUTPUT jacks on the rear panel of main unit to connect to the satellite speakers. (Connection example) SPEAKER OUTPUT FR FL C RL OPERATING INSTRUCTION - MAIN UNIT A. Switch On/Off the Product 1. Before turning on the system, please connect it according to the System Connection Instruction. 2. Connect AC power supply with this product. (Caution: Power source must be consistent with this product.) Front Right Speaker RR 3.
OPERATING INSTRUCTION - REMOTE CONTROLLER OPERATING INSTRUCTION - CONTROLS AND FUNCTIONS 5. To properly use the remote controller, please put its front emitter right at the receiving lattice (remote sensor) of the main system. MUTE POWER 33 23 6. The normal and effective distance for operating the system by the remote controller is 7 meters within the system, and at 30 angle left or right diverged away from the system.
OPERATING INSTRUCTION - CONTROLS AND FUNCTIONS 30. BASS +: Bass Output Up. 31. VOLUME +: Main Volume Up. 32. BASS -: Bass Output Down. 33. MUTE: Output Suspension. OPERATING INSTRUCTION - REMOTE CONTROLLER 1. Before using the remote controller, please insert correct type of batteries into the battery compartment. 2. The remote controller uses 2x1.5V/AAA batteries. 3. Please insert the batteries as indicated below. a/ Remove the battery compartment cover. 34. PRESET: Location retrieval. 35.