DVD / MP3 / CD HOME THEATER DRS-1500 OPERATION MANUAL mp3
PLEASE READ THE INSTRUCTION CAREFULLY BEFORE OPERATING THIS UNIT. WARNING To prevent fire or shock hazard, do not expose this appliance to rain or moisture. The apparatus shall not be exposed to dripping or slashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT Since the CD circuitry may cause interference to other radio tuners nearby, switch this unit off when not in use or move it away from the affected radio tuner.
Getting Started Before attempting to connect, operate or adjust this product, please read these instruction completely and keep this manual for future reference. Dear customers : May we take this opportunity to thank you for purchasing this DVD HOME THEATER. We strongly recommend that you carefully study the operating instructions before operating the unit. Main Features • Front loading DVD / MP3 / CD player. • Built-in Dolby Digital, Dolby Prologic Decoder. • Built-in 5.1 Channel Amplifier.
Getting Started Disc types Audio & Video MP3 Disc size 12cm single side, single layer / single side, double layer PAL and NTSC DVD disc Playback time 135min / 240min max. Audio Disc size 12cm / 8cm CD disc Playback time 74min/20min max. Audio MP3 format disc * Player is CD-R, CD-RW compatible. Note: CD-R, CD-RW Discs recorded with writing device can only be used when they are correctly treated.
Safety precautions Warning Attention To avoid electrical shock, do not open the cabinet, refer servicing to qualified personnel only. If smoke, malodor or unrelated noise are emitted from the unit, turn off the power and disconnect the AC power cord. Warning Attention Keep the unit away from flower vases, tubs, sinks, etc. If liquids are spilt into the unit, serious damage could occur. Touching the unit is dangerous especially if during thunder.
Getting Started Battery installation (remote control unit) 1. Remove the battery cover. 2. Insert two batteries (AA, R6, UM-3 types) making sure the polarity (+/-) matches the marks inside the unit. 3. Replace the cover. – Do not attempt to recharge, short-circuit, disabssemble, heat or throw the batteries into the fire. + — – Do not mix old and new batteries Note : Weak batteries can leak and severely damage the remote control unit. + 1 1. 2. 3. 4. 5. 20 2 21 3 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16.
Getting Started System Connection Warning : Turn off the power and keep AC cord pulled out from the outlet when connecting the system.
Getting Started Front Panel Control (Most of the function can be controlled by remote control unit.) 1 2 14 15 3 1. 2. 3. 4. 5. 6. 7. 8. 12 4 5 6 7 8 9. 10. 11. 12. 13. 14. 15.
BASIC PLAYBACK This section shows you the basics on how to playback a DVD Video Disc. PREPAREATION 1 2 • When you want to playback DVD video discs, turn on the TV and select the video input source connected to the DVD receiver. • When you want to enjoy the sound of the DVD video discs or audio CDs from the audio system, turn on the 3 11 audio system and select the input source connected to the DVD receiver. • For connection details, see page 7.
SPECIAL PLAYBACK STOP PLAY Press STOP during playback. The first time return to Logo. Press RESUME can go on playing at the stop point. The second time is full stop. RESUME PLAY • When play is stopped, the unit records the point where STOP is pressed (RESUME function). • Press PLAY and play will resume from that point. OTHERS • Resume function will be cleared when STOP is pressed on the stop mode. • Resume function will be cleared when power is turned off and then on.
Playing in Slow-Motion (for DVD only) • Press SLOW button during playback The playback speed becomes : –> 1/2 –> 1/4 –> 1/8 –>1/ 16 –> normal of the normal speed. • To return to normal playback, press PLAY. Notes: • The sound is muted during the slow-motion playback. • Subtitles do not appear on the screen during slow-motion playback. • The SLOW SCAN button do not work with Audio CDs.
CHANGING AUDIO SOUNDTRACK LANGUAGE It is possible to change the audio soundtrack language (or encoding method, channel number) to a different language from the one selected at the initial settings in case of DVD disc. This operation works only with discs on which multiple audio soundtrack languages are recorded. And it is possible to change the audio channel. Notes: • When the desired language is not selected even after pressing the button several times, it means this language is not available on the disc.
Repeating sections between two specific points (A–B repeat) 2. Press REPEAT A–B during play at the point where repeat play is to start (A). 3. Press REPEAT A–B during play at the point where repeat play is to be concluded (B). Repeat play of the selection between points A and B starts. To return to normal play Press REPEAT A–B once “OFF” is displayed.
MP3 Play 1. PLAY MP3 DISC • Load MP3 disc The MP3 menu is displayed and play automatically. • Press / button to move the yellow bar to the track, and press ENTER. • The track number and current page only be changed by moveing the / button. • When press next, the previous track will play next track. 2. Repeat • Press REPEAT button the screen will show: first time repeat one –> repeat folder –> folder (repeat off) 3. Shuffle • Press SHUFFLE, the MP3 track will be played at the shuffle mode.
To listen to non-preset radio stations • Use manual tuning, press TUNING/SEARCH or button. • Use automatic tuning, press and hold TUNING/SEARCH or button for 2 seconds. To turn off the radio Press POWER to turn the DVD receiver off or select another function mode (DVD/CD) by press INPUT button. SETTING UP MENU Once the initial settings have been completed, the DVD receiver can always be operated under the same conditions (especially with DVD discs).
3. Set up the OSD LANG • You can select the TV display language. -- GENERAL PAGE -TV DISPLAY ANGLE MARK ENGLISH OSD LANG CAPTIONS FRENCH SCR SAVER GERMAN SPANISH DANISH SWEDISH -- GENERAL PAGE -- 4. Set up CAPTIONS - ON, open the CAPTIONS - OFF, close the CAPTIONS TV DISPLAY ANGLE MARK OSD LANG CAPTIONS ON SCR SAVER OFF 5. Setup SCR SAVER • When no disc or playback stop some time, the unit will automatic open the Screen Saver function.
• STRERO When source is two channel, the video output is the common stereo signal. When source is 5.1 channel, only output the left and right 2 channel signal. -- SPEAKER SETUP PAGE -DOWNMIX FRONT SPEAKER LARGE CENTER SPEAKER SMALL REAR SPEAKER • V SURR Surround sound. SUBWOOFER • OFF Close the DOWNMIX. -- SPEAKER SETUP PAGE -DOWNMIX FRONT SPEAKER • You can select the 5.1 channel ON or OFF by the Center, Rear, Subwoffer, Item ON/OFF. If all items ON, you can enjoy 5.1 channel.
4. Setup EQUALIZER Setup Equalizer can ajust sound quality including BASS, SUPPER BASS and TREBLE. -- EQUALIZER PAGE -BASS BOOST ON SUPPER BASS OFF TREBLE BOOST -- EQUALIZER PAGE -BASS BOOST SUPPER BASS ON TREBLE BOOST OFF -- EQUALIZER PAGE -BASS BOOST SUPPER BASS TREBLE BOOST ON OFF 5. Setup 3D PROCESSING • Setup PROLOGIC II You can select the PROLOGIC II decoder ON/OFF.
VIDEO SETUP 1. Setup COMPONENT • Select OFF, the R.G.B. signals will not come out. • Select RGB, the signals will come out, then the video mode change to scart mode. 2. Setup TV MODE • Select INTERLACE, the RGB output format is interlace. • Select P-SCAN, the RGB output format is non-interlace. -- VIDEO SETUP PAGE -CVBS OFF RGB QUALITY RGB -- VIDEO SETUP PAGE -CVBS RGB QUALITY INTERLACE P-SCAN 3.
PREFERENCE SETUP • Press / button to select PREFERENCES SETUP and press ENTER. The left is main catalog, the right is the children catalog. • Press / button to enter the children catalog and press ENTER to confirm. 1. Setup TV TYPE • If the TV set is PAL, please select PAL. • If the TV set is MULTI, please select MULTI. • If the TV set is NTSC, please select NTSC. • The unit will output the TYPE you select. 2. Setup the AUDIO • The audio set up allows access to the audio languages available onthe disc.
5. Setup the PARENTAL • When playback with the parent lock function disc, can use the PARENTAL to control and with the password (password: 1234) 6. Setup the DEFAULTS • If you do not want to save all of the set up by yourself, select it. The DVD receiver will resume the deference of just leave the factory. On SETUP Menu, press “DEFAULT” button on remote, the operation is same as above.
TROUBLE SHOOTING Check the following guide for the possible cause of a problem before contacting service. Symptom No Power Correction Cause • The power cord is disconnected. • Plug the power cord into the wall outlet and unit securely. • Insert a disc. (Check that the DVD or auThe power is on, but DVD • No disc is inserted. dio CD indicator in the DVD display is lit.
SPECIFICATION GENERAL Power source Power consumption Mass External dimensions (WxHxD) Operating conditions Operation status Operating humidity AC 230V 50Hz 120W 3.8Kg 430 X 354 x 60 mm Temperature: 5°C to 35°C Horizontal 5% to 90% CD/DVD Laser Signal system Frequency response (audio) Signal to noise ratio (audio) Dynamic range (audio) Harmonic distortion (audio) Semiconductor laser, wavelength 650nm Pal 650/50, NTSC 525/60 4Hz to 20 KHz More than 90dB (1KHz, NOP, 20KHz LPF/A-Filter) More than 95dB 0.
ALL RIGHTS RESERVED COPY RIGHT DENVER ELECTRONICS A/S www.denver-electronics.