BLUETOOTH SPEAKER WITH LED LIGHTS Model No.
1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. 23. 24. 25. 26. TWEETER X 2 FUNCTION/STANDBY BUTTON P-MODE/M./ECHO BUTTON 10/M./FOLD.- BUTTON /TUN.- BUTTON VOL.- BUTTON /TUN.+ BUTTON VOL.+ BUTTON /PAIR/SCAN BUTTON 10/M./FOLD.+ BUTTON EQ/LIGHT BUTTON PARI INDICATOR CHARGE INDICATOR LCD DISPLAY SPEAKER X 2 HANDLE MIC VOL. KNOB 6.3mm MIC JACK 1 6.3mm MIC JACK 2 LIGHT BAR 3.
There’s a light bar above the handle, the white light on when the Blue/Red LED on constantly, the bar will keep flashing when LED in flashing mode. Press and hold the EQ/LIGHT button until OFF shows on the display to turn it off together with the disco light. RADIO OPERATION Listen to FM radio broadcasts. Press the FUNCTION/ button on the unit to choose FM mode, the display will read the radio frequency. Eng-2 Note: In order to get the best reception, extend the FM wired ANT.
3. Adjust the VOLUME on the unit or on the external device to increase or decrease the music volume to your desired level. 4. Press and hold the PLAY/PAUSE/PAIR/SCAN button to disconnect Bluetooth. Note: The Bluetooth works best within 10 meters in open air. AUX-IN OPERATION 1. 2. Press the FUNCTION/ button on unit to select the “AUX” mode. Connect your audio device to the AUX IN jack on the top panel of the unit with an AUX IN cable.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment and included batteries contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment and batteries) is not handled correctly. Electric and electronic equipment and batteries is marked with the crossed out trash can symbol, seen below.
