Instruction Manual DENVER VPL-120 Suitcase Turntable Player READ INSTRUCTIONS CAREFULLY BEFORE USE AND STORE IN A SAFE PLACE FOR FUTURE REFERENCE ENG-1
DESCRIPTION 1. Lock catch 2. Dust cover 3. Adapter - Use this when playing 45rpm records with cut out centres. 4. Tone arm lift 5. Auto stop control 6. Speed selection - Three speed for choice: 33.3, 45, 78 rpm. 7. LED power indicator 8. Power switch / Volume control 9. Headphone jack 10. Tone arm 11. Speaker 12. Cartridge 13.
14. PC link connector 15. Aux in 16. Line out R channel 17. Line out L channel 18. DC power jack INITIAL SET-UP MAINS CONNECTION Ensure that the mains voltage of your home corresponds to the operating voltage of the unit. Your unit is ready to be connected to a mains voltage of 9V DC adaptor. AMPLIFIER CONNECTION (if required) Whilst you can listen to your new turntable using the built in speakers you may wish to connect it to your existing Hi Fi system.
INSTALLING THE SOFTWARE ● Place the supplied CD into the drive of your computer, follow the instructions and the software will automatically install as follows: ● Click ‘Next’ ● Select ‘I accept’ option then click ‘Next’: ENG-4
● Click ‘Next’: ● Here either select another location or click ‘Next’ to continue (recommended): ● Click ‘Next’ to continue: ENG-5
● Click ‘Install’ to continue: ● The software will start to install: ● Click on ‘Finish’ to complete the installation: ENG-6
● Audacity should automatically start up, if not follow the next sequence: ● The Audacity icon will now be seen on the desktop, double click on it to start Audacity running, if an icon does not appear, go to the ‘C’ drive under ‘My Computer’, click on ‘Program files’ and then ‘Audacity’. Right click on the ‘orange ball wearing Headphones’ icon and select ‘Send to’ then ‘Desktop (create shortcut)’.
Recording to computer using Audacity ● Start the record playing as described above, and press Record at the top of the Audacity window to start recording to the computer. ● Once recorded use the Transport controls at the top of the screen to, Go to start, Play, Record, Pause, Stop and Go to end of Wave form as below: Pause Play Stop Go to Start Go to End Record Waveform ● Use the file, Edit, View, Project, Generate, Effect and Analyse menus to Save, Export and Manipulate your music.
recording level. Move this control up if the recording is too quiet and down if the recording is too loud ● NOTE: the blue wave form should sit in the Audacity window such that the peaks of it stop short of the top and bottom ● Before editing your music, the recorded waveform will need to be highlighted. ● To highlight your wave form, click with the left mouse button on the left hand side of the waveform (under the L+R controls) and the waveform will go darker.
● This can be either an existing one or a new folder. ● NOTE: In order to activate the Export to Mp3 feature, it will be necessary to copy a file named lame_enc.dll from the installation CD and paste it in the AUDACITY folder that contains the software on the hard drive that was copied earlier from the CD. The software will automatically detect this file and exporting as an mp3 will now be possible.
INSTALLING A NEW STYLUS CARTRIDGE - Refer to the figures 5 & 6 NOTES We advise you to clean your records with an anti-static cloth to gain maximum enjoyment from them and to make them last.
ALL RIGHTS RESERVED, COPYRIGHT DENVER ELECTRONICS A/S Electric and electronic equipment contains materials, components and substances that can be hazardous to your health and the environment, if the waste material (discarded electric and electronic equipment) is not handled correctly. Electric and electronic equipment is marked with the crossed out trash can symbol, seen below.
