DWWB005 Installation Manual For OEM integration only – device cannot be sold to general public. Therefore we will ask OEM to include the following statements required by FCC on the product and in the Installation manual Notice. Contents 1.Land Pattern(Recommended) ( ) 2.Supply Voltage 3.Pin configuration 4.
1 Land Pattern(Recommended Unit:mm) 1.
2. Supply Voltage Typ.[V] Min.[V] Max.[V] VBAT 3.6 3.0 4.2 VIO 1.8 1.65 1.92 Please supply pp y a stabilized p power supply pp y voltage g through g the VBAT And VIO.
3.
4. Notice Please describe the following warning on the final product which contains this module.
Please describe the following warning to the manual. When installing it in a portable equipment [ Model Name ] Note) Portable equipment : Equipment for which the spaces between human body and antenna are used within 20cm. Mobile equipment : Equipment used at position in which the spaces between human body and antenna exceeded 20cm.
Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
2) Module approval valid only when the module is installed in the tested host or compatible series of host which have similar RF exposure characteristic with equal or larger antenna separation distance. As long as 2 conditions above are met, further transmitter test will not be required.
Industry Canada statement: This device complies with RSS-247 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference interference, and (2) this device must accept any interference received received, including interference that may cause undesired operation. Ce dispositif est conforme à la norme CNR-247 d‘Industrie Canada applicable aux appareils radio exempts de licence.
Tant que les 2 conditions ci-dessus sont remplies, des essais supplémentaires sur l'émetteur ne seront pas nécessaires. Toutefois l'intégrateur Toutefois, l intégrateur OEM est toujours responsable des essais sur son produit final pour toutes exigences de conformité supplémentaires requis pour ce module installé.
Manuel d'information à l'utilisateur final g OEM doit être conscient de ne p pas fournir des informations à l'utilisateur final q quant à la façon ç d'installer L'intégrateur ou de supprimer ce module RF dans le manuel de l'utilisateur du produit final qui intègre ce module. Le manuel de l'utilisateur final doit inclure toutes les informations réglementaires requises et avertissements comme indiqué dans ce manuel.