User's Manual

ManualsBrandsDENSO TEN ManualsElectronicsComb Player A

Instruction for usage of Bluetooth device

■What is like " Bluetooth device”?

By connecting Bluetooth portable Audio player (hereinafter

called portable device) or Hands-free phone* which

operation is confirmed, to the system, you will be able to use

portable device without operating a portable device.

* Including Audio player in a Hands-free phone. The

operation of an adaptor for Bluetooth audio is not confirmed.

You can check if the operation of your portable device is

confirmed at TOYOTA dealer or on the following website.

・The U.S. main･land : http://www.toyota.com

・Hawaii : http://www.toyotahawaii.com

・Canada: http://www.toyota.com

The portable device must be complied with the following

specification to connect this system.

Please understand that some functions in this system may be

limited by the model of portable device.

■Required Bluetooth Specification for cellular phone or

portable audio player

Ver.1.1 or above

■Required profiles for a cellular phone

・ HFP (Hands Free Profile)

Ver. 1.0

・ OPP (Object Push Profile)

Ver. 1.1

■Required profiles for a portable audio player

・ A2DP (Advanced Audio Distribution Profile)

Ver.1.0

・ AVRCP (Audio/Video Remote Control Profile)

Above Ver.1.0 (Above Ver.1.3 is recommended.)

Bluetooth is trademark owned by Bluetooth SIG. Inc

The frequency band is adopted for industrial, scientific,

medical and amateur radio service, besides this device.

(Hereinafter called other wireless stations for the above

services) Before using this system, ensure there is no

wireless station near this device, which is under operation.

If you would find this device would cause harmful

interference toward other wireless stations, move to another

location to prevent the interference.

■Certifications for this system

FCC ID: BABFT0001A

IC: 2024B-FT0001A

Note:

This device complies with Part15 of the FCC Rules and

RSS-Gen of the IC Rules. Operation is subject to the

following two conditions: (1) this device may not cause

harmful interference, and (2) this device must accept any

inference received, including interference that may cause

undesired operation.

Change or modifications not expressly approved by the

party responsible for compliance could void the user's

authority to operative the equipment.

Summary of content (22 pages)

PAGE 1
Instruction for usage of Bluetooth device ■What is like " Bluetooth device”? By connecting Bluetooth portable Audio player (hereinafter called portable device) or Hands-free phone* Bluetooth is trademark owned by Bluetooth SIG. Inc which operation is confirmed, to the system, you will be able to use portable device without operating a portable device. The frequency band is adopted for industrial, scientific, medical and amateur radio service, besides this device.
PAGE 2
About Indications on display Warning ! ■The connection of Bluetooth The status of Bluetooth connection is displayed as below Don't operate portable device while driving. display image. Caution ! • Don't leave portable device in the vehicle to prevent damage. (Under the scorching sun, temperature in a vehicle will be very high) • Don't use portable device near the system. It may cause the debased sound quality, or bad connection This status. connection is in good status.
PAGE 3
Bluetooth Audio ■To check Bluetooth connection Bluetooth setting When Bluetooth is connected in the stable condition, ■To register a portable device ｗill appear on the display. To use Bluetooth audio, it is necessary to register a Please check this indication when using. portable device in the following steps. ・ Up to 2 portable devices can be register in the system. ■When automatic connection is failed.
PAGE 4
■To reconnect Bluetooth ■To change a name of a portable device When Bluetooth connection is disconnected due to low radio The name of portable device that appears on the display transmission can be changed as desired. circumstance, Bluetooth will perform an ・ automatic connection. Even if the name of a portable device is changed at the system, the registered name in portable device will Note: The automatic connection will be performed only for certain duration of time.
PAGE 5
■To Initialize the Bluetooth setting You can reset each setting you have made before. 1. Press a button under the indicated “SETUP” on the display. 2. Find “System Setup” by turning TUNE-SCROLL knob and press the knob to select. 3. Then find “Initialize” by turning TUNE-SCROLL knob, and press the knob to select. 4. Then find “Confirm” by turning TUNE-SCROLL knob, and press the knob to completion. ■To delete the registration of a portable device 1.
PAGE 6
How to use Bluetooth Audio You can play the connected portable device. To use Bluetooth audio, you have to register the portable device on the system. Seek sw Tune scroll knob Type Folder sw Text sw Scan sw About Indication on desplay Depending on portable device models, artist names, album name, or truck name may not be indicated on the display.
PAGE 7
To Pause See the previous page for Bluetooth audio operation image on the display. ・ Press button to pause. ・ And Press botton again to play trucks To Select an album Upon connecting to a portable device, See the previous page for the display image for Bluetooth audio operation. ・ To select previous album. Press ∨side of the botton ・ To select following album ∧side of the botton. Press Note: Some portable devices may not support this function.
PAGE 8
Scanning introduction of a track Play tracks at random Upon connecting to a portable device, Upon connecting to a portable device, ・ To scan an introduction of tracks Press button. This function will be performed in a method of portable device accordingly Indication for each setting will be as follow. ・ RDM (without underline): Play in normal order.
PAGE 9
To chose a channel on a Radio To select a track on a music CD, MP3/WMA You can choose a channel (Frequency) of broadcasting Upon playing music, press station. ・ button To select the reverse track Press ∧side of the botton To select from pre-set channels Press ・・・ To select the forward track Press ∨side of the button button To select higher channel Press ∧side of the botton To select a scene on DVD or MP3/WMA To select lower channel The chapter or a track can be selected.
PAGE 10
STEERING AUDIO SWITCH ■Power on / off Operation with a steering switch ■Steering audio switch ・ To turn on power ・Type A Press MODE switch ・ 1 To turn off power Press and hold MODE switch until you hear blip. ■Volume adjustment Press the volume adjustment switch 2 3 ・ To turn up the volume Press 4 ・ + To turn down the volume Press - ・Type B ! 1 Caution For your safety, adjust the volume properly. ■To change the MODE Press MODE switch 2 3 1. Volume up/down 2. ON-HOOK switch 3.
PAGE 11
■Using the hands-free phone system for the first time Bluetooth Hands-free phone Operating the system by using a voice command Before using the hands-free phone system, it is necessary By following voice guidance instructions output from the to register a Hands-free phone in the system.
PAGE 12
Normal operation First menu Callback First Second Third menu menu - - Operation detail menu Setup Second Third Operation detail menu menu Security Set PIN Setting a PIN code Phonebook Locking the phone book Dialing a number stored in the incoming call history memory Lock Phonebook Redial - - Dialing a number stored in the outgoing call history memory Dial - - Dialing by inputting a number Phone - - by name Phone book Dialing by inputting a name registered in the phone book
PAGE 13
■Automatic adjustment of volume Using a short cut key First Second menu menu Dial - "XXX (name)" Phonebook - Operation detail automatically increases. The volume returns to the previous Dialing a number registered volume setting when vehicle speed drops to 43 mph (70 km/h) in the phone book or less.
PAGE 14
■Making a phone call ■Dialing by inputting a name ・ 1. Dialing by inputting a number ”Dial by number” ・ Dialing by inputting a name Press the TALK switch on the steering and say “Dial by name” 2. Select a registered name to be input by either of the ”Dial by name” following methods: ・ Speed dialing a. Press the TALK switch on the steering and say a ・ Dialing a number stored in the outgoing history memory b. Press the TALK switch on the steering and say, registered name.
PAGE 15
■Transferring a call The following operations can be performed: A call can be transferred between the Hands-free phone Dialing: and system while dialing, receiving a call, or during a call. or select “Dial” by using a voice command or Use one of the following methods: TUNE-SCROLL knob. a. Press the OFF-HOOK switch on the steering Operate the Hands-free phone.
PAGE 16
Setting a Hands-free phone Selecting the Hands-free phone to be used. Registering a Hands-free phone in the system allows the 1. system to function. The following functions can be used for registered Hands-free phones: Select “Select Phone” by using a voice command or TUNE-SCROLL knob. 2.
PAGE 17
Listing the registered Hands-free phones Changing the passkey Selecting “ List phones” by using a voice command or 1. Select “Set Passkey” by using a voice command or TUNE-SCROLL knob causes the list of registered Hands-free phones to b read a loud. When listing is TUNE-SCROLL knob. 2.
PAGE 18
Setting or changing the PIN Setting voice guidance volume ■Setting a PIN 1. 2. 1. Select “Guidance Vol “ by using TUNE-SCROLL knob. Select “Set PIN” by using a voice command or 2. Change the voice guidance volume. TUNE-SCROLL knob. ・ To decrease the volume: Enter a PIN by using a voice command or TUNE-SCROLL knob. When using TUNE-SCROLL 1. Select “Set PIN” by using a voice command or 2. To increase the volume: Turn TUNE-SCROLL knob clockwise. Initialization 1.
PAGE 19
To enter the menu of each setting, follow the steps below: • Adding a new phone number ■Adding procedure 1. 1.“Phonebook” -> 2.“Add Entry” • Setting speed dial 1. “Phonebook” -> 2.“Set Speed Dial” • • • Changing a registered name TUNE-SCROLL knob. 2. Use one of the following methods to input a telephone number: >Inputting a telephone number by using a voice command 1. “Phonebook” ->2.“Change Name” 2-1 Select “By Voice” by using a voice command or Deleting registered data TUNE-SCROLL knob. 1.
PAGE 20
>Inputting a phone number by using TUNE-SCROLL knob. 3. Select the name to be registered by either of the following 2-1 Select “Manual Input” by using TUNE-SCROLL methods, and select “Confirm” by using a voice command knob. or TUNE-SCROLL knob. 2-2 Input a phone number by using TUNE-SCROLL a. Press the TALK switch on the steering and say the b. Select “Record Name” by using TUNE-SCROLL knob, and presses it again. desired name. Input the phone number 1 digit at a time.
PAGE 21
Changing a registered name 1. Select “Change Name” by using a voice command or Deleting registered data 1. TUNE-SCROLL knob. 2. TUNE-SCROLL knob. Select the name to be changed from one of the following methods. a. 2. b. Select the data to be deleted by either of the following methods, and select “Confirm” by desired name, and select “Confirm” by using a using a voice command or TUNE-SCROLL knob. a. Press the TALK switch on the steering, and say “List names.
PAGE 22
Listing the registered data Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system will return to “Phonebook.” Pressing the TALK switch on the steering while the desired data is being read aloud selects the data, and the following function will be available.