User Guide English (3–13) Guía del usuario Español (14–24) Guide d’utilisation Français (25–35) Guida per l’uso Benutzerhandbuch Appendix Italiano (36–46) Deutsch (47–57) English (58)
User Guide (English) Introduction Please see this guide’s Setup chapter to learn how to integrate DN-350UI with your audio system, and then refer to the Operation chapter to start using DN-350UI. Box Contents Support DN-350UI FM Indoor Antenna Cable Rack Ears with Screws User Guide Power Cable Safety & Warranty Manual Remote Control For the latest information about this product (system requirements, compatibility information, etc.) and product registration, visit denonpro.com.
Features Front Panel 3 1 2 5 6 4 10 8 7 12 14 9 11 13 1. Power: Press this button to turn the unit on or off. Make sure the AC In is properly connected to a power outlet. Do not turn the unit off during media playback—doing so could damage your media. 2. Home: Press this button to return to the home menu of the currently selected source in the display. 3. Info: Press this button to toggle through available information about the current source. 4.
7. Ethernet Port: This port lets you connect DN-350UI to a network. Use a standard Ethernet cable to connect this port to a network switch or router. 8. USB Port: This USB port is used to update the unit's firmware. Visit denonpro.com to check for available updates. 9. USB Operation Switch: When the firmware update USB port is not in use, leave this switch in the Off position. When updating the unit, set this switch to the Update position. 10.
Setup Important: Connect all cables securely and properly (with stereo cables: left with left, right with right), and do not bundle them with the power cable. 1. Use XLR cables, a stereo RCA cable, a digital coaxial cable, or a digital optical TOSLINK cable to connect the Outputs (Analog or Digital) to the inputs of your external receiver, amp, powered monitors, etc. 2. Connect the FM Antenna on the back of the unit, if needed. 3.
Operation Menu Operation To navigate the menus: • Turn the Jog Dial or press the Up/Down buttons on the remote control to scroll through options in the display. • Press the Jog Dial or the Select button on the remote control to select an option. • Press the Back button to move backwards in the menu.
Auto Scan Select this option to begin the auto scan process. DN-350UI will automatically scan for stations with clear reception and save them to preset numbers. The display will show the progress of the auto scan and number of stations found. When the process is completed successfully, the display will show Complete. Important: The preset memory can hold up to 30 FM stations. If the preset memory reaches its 30-station limit during the Auto Scan process, the process will stop.
Internet Radio Last Listened Select this option to view stations that have been recently played. Station List Select this option to browse Internet radio stations and podcasts. • My Favorites: Displays Stations and Podcasts saved as Favorites. To save an Internet radio station or podcast as a favorite, press the Favorites button while listening. You can also manage your favorite stations by creating a Frontier Nuvola Radio Portal account at srsupport.frontier-nuvola.net.
Spotify How to use Connect You’ll need Spotify Premium to use Connect, see details overleaf. 1. Add your new device to the same WiFi network as your phone, tablet or PC (see product user instructions for details). 2. Open the Spotify app on your phone, tablet or PC, and play any song. 3. If you’re using the app on a phone—tap the song image in the bottom left of the screen. For tablet and PC move to Step 4. 4. Tap the Connect icon ( ). 5. Pick your device from the list.
System Settings Select System Settings to access the following sub-menu options. Internet Setup Select this option to configure and view your network settings. • Wizard: Select this option to automatically search for and connect to available networks. If the network is password protected, you will be prompted to enter it using the Jog Dial. If the unit fails to connect to the selected network, it will return to the Select Network page. • View Settings: Select this option to view current network settings.
Troubleshooting If you encounter a problem, try doing these things first: • Make sure all cables and other connected devices are properly and securely connected. • Make sure you are using DN-350UI as described in this user guide. • Make sure your other devices or media are working properly. • If you believe DN-350UI is not working properly, check the following table for your problem and solution. • For help with Internet Radio, visit srsupport.frontier-nuvola.net.
Problem: Solution: Please see: No Device appears even when a USB device is inserted. Disconnect and reconnect the USB device to make sure it is securely inserted. Operation Make sure the USB device is of a mass storage class or compatible with MTP. Make sure the USB device is formatted using a FAT16 or FAT32 file system. Do not use a USB hub or USB extension cable. Not all USB devices are guaranteed to work; some may not be recognized. Files on a USB device do not appear.