Connections Playback Settings Tips .
Contents Connections Playback Settings 5 6 6 7 7 7 9 10 10 13 14 16 Accessories Inserting the batteries Operating range of the remote control unit Features High quality sound High performance Easy operation Part names and functions Front panel Display Rear panel Remote control unit Front panel Display Rear panel Appendix Connecting a playback device Connecting a set-top box (Satellite tuner/cable TV) Connecting a DVD player or Blu-ray Disc player Connecting a game console or video camcorder Connect
Contents Connections Playback Listening to FM/AM broadcasts Listening to FM/AM broadcasts Tuning in to stations and presetting them automatically (Auto Preset) Presetting the current broadcast station (Preset Memory) Listening to preset stations Skipping preset broadcast stations (Preset Skip) Cancelling Preset Skip Convenience functions Performing repeat playback (Repeat) Performing random playback (Random) Adjusting the tone (Tone) Optimizing the night time listening volume (Night Mode) Displaying your
Contents Connections Playback Display Rear panel Tips Appendix Tips 81 81 81 82 83 83 85 87 88 88 89 90 90 91 92 92 92 94 95 95 96 96 97 Inputs Input Assign Source Level Input Select Speakers Auto Setup Procedure for speaker settings (Auto Setup) Error messages Manual Setup Speaker Config.
Contents Connections Playback Settings Tips Appendix Thank you for purchasing this Denon product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading this manual, be sure to keep it for future reference. Accessories . Check that the following parts are supplied with the product.
Connections Contents Playback Settings Inserting the batteries 1 Tips Appendix NOTE 0 To prevent damage or leakage of battery fluid: 0 Do not use a new battery together with an old one. 0 Do not use two different types of batteries. 0 Remove the batteries from the remote control unit if it will not be in use for long periods. 0 If the battery fluid should leak, carefully wipe the fluid off the inside of the battery compartment and insert new batteries.
Contents Connections Playback Settings Tips Appendix Features High quality sound High performance 0 With discrete circuit technology, the power amplifier provides 0 4K 60Hz input/output supported identical quality for all 5-channels (90 Watts x 5-channels) For optimum realism and stunning dynamic range, the power amplifier section features discrete power devices (not integrated circuitry).
Contents Connections Playback Settings Tips Appendix 0 Wireless connection with Bluetooth devices can be carried out 0 HDMI connections enable connection to various digital AV devices (5 inputs, 1 output) easily (v p. 42) 5 1 Out . In . This unit is equipped with 5 HDMI inputs and 1 HDMI output enabling connection to various HDMI compatible devices such as Blu-ray Disc players, game consoles and HD video camcorders.
Contents Connections Playback Settings Tips Easy operation 0 “Setup Assistant” provides easy-to-follow setup instructions First select the language when prompted. Then simply follow the instructions displayed on the TV screen to set up the speakers etc. 0 Easy to use Graphical User Interface This unit is equipped with a Graphical User Interface for improved operability.
Contents Connections Playback Settings Tips Appendix Part names and functions Front panel q w e r t u i o y Q0 Q1 Q2 Q3 MASTER VOLUME . Q4 For details, see the next page.
Contents qw e Connections r Playback t u i Settings E Display This displays various pieces of information. (v p. 13) o Q0 Q1 Q2 Q3 F MASTER VOLUME knob This adjusts the volume level. (v p. 39) G SOUND MODE buttons (0 1) These select the sound mode. (v p. 57) . H Tuner preset channel buttons (TUNER PRESET CH +, –) These select preset broadcast stations. (v p. 50) A Power operation button (X) Used to turn the power on/off (standby). (v p.
Contents Connections Playback Settings Tips Appendix P QUICK SELECT buttons With a single press of any of these buttons, you can call up various settings you’ve registered to each button such as the input source, volume level and sound mode settings. (v p. 65) Q TONE CONTROL ON/OFF button Set the tone control function to on/off. (v p. 54) MASTER VOLUME R BASS/TREBLE button Selects the range for which to adjust the tone. (v p. 54) .
Contents Connections Playback Settings Tips Appendix Display w e A Input mode indicators These light according to the audio input mode settings of each input source. (v p. 82) Rear panel i E Volume indicator F MUTE indicator This blinks while the sound is muted. (v p. 39) G Information display The input source name, sound mode, setting values and other information are displayed here.
Contents Connections Playback Settings Tips Appendix Rear panel . q t y w u r e i For details, see the next page.
Contents q Connections w e Playback Settings Tips Appendix C HDMI connectors Used to connect devices equipped with HDMI connectors. 0 “Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel)” (v p. 26) 0 “Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel)” (v p. 27) 0 “Connecting a set-top box (Satellite tuner/cable TV)” (v p. 30) 0 “Connecting a DVD player or Blu-ray Disc player” (v p.
Contents Connections Playback Settings Tips Appendix Remote control unit A Input source select buttons These select the input source. (v p. 38) B Channel/page search buttons (CH/PAGE df) These select radio stations registered to presets or switch pages. (v p. 50) q C MUTE button (:) This mutes the output audio. (v p. 39) D Information button (INFO) This displays the status information on the TV screen. (v p. 97) E Cursor buttons (uio p) These select items.
Contents Connections Playback Settings Tips Appendix F BACK button This returns to the previous screen. Q1 Q2 G Channel level button (CH LEVEL) Adjusting the volume of the speakers. (v p. 62) H System buttons These perform playback related operations. Tuning up / Tuning down buttons (TUNE +, –) These select either FM broadcast or AM broadcast. (v p. 48) I QUICK SELECT buttons (1 – 4) These call up settings registered to each button, such as input source, volume level and sound mode settings. (v p.
Contents Connections Playback Settings Tips Appendix M POWER button (X) This turns the power on/off. (v p. 38) N ECO Mode button (G) This switches to ECO Mode. (v p. 92) O VOLUME buttons (df) These adjust the volume level. (v p. 39) Q3 P OPTION button This displays the option menu on the TV screen. Q ENTER button This determines the selection. R SETUP button This displays the menu on the TV screen. (v p. 70) Q4 Q5 S Preset memory button (MEMORY) The current broadcast station that is preset. (v p.
Contents Connections Playback Settings o Contents Tips Appendix o Cables used for connections 20 Connecting a TV 25 Connecting a playback device 29 Connecting a USB memory device to the USB port 33 Connecting an FM/AM antenna 34 Connecting the power cord 36 Provide necessary cables according to the devices you want to connect. Speaker cable . Connecting speakers Subwoofer cable . NOTE HDMI cable . 0 Do not plug in the power cord until all connections have been completed.
Contents Connections Playback Settings Tips Appendix Connecting speakers Install speakers and connect them to this unit. (“Speaker installation” (v p. 20), “Speaker connection” (v p. 22)) Speaker installation . Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Speaker installation is explained using this example of a typical installation.
Contents Connections Playback Settings Tips Appendix o When 5.1-channel speakers are installed 0 Use the illustration below as a guide for how high each speaker should be installed. The height does not need to be exactly the same. FL FR Surround speaker SW C z1 z2 Front speaker SL SR . .
Contents Connections Playback Settings Tips Appendix o Connecting the speaker cables Speaker connection Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to this unit, and be sure to connect the channels and polarities correctly. Here we connect the speakers in the room to this unit. This section explains how to connect them using typical examples. 1 NOTE .
Contents Connections Playback Settings Tips o Connecting the subwoofer . Use a subwoofer cable to connect the subwoofer. Two subwoofers can be connected to this unit. The same signal is output from the respective subwoofer terminals.
Contents Connections Playback Settings Tips Appendix Standard speaker configuration and connection This serves as a basic 5.1-channel surround system. Sound modes such as Dolby Pro Logic g are supported. FL FR SW C SL . .
Contents Connections Playback Settings Tips Appendix Connecting a TV Connect a TV to this unit so that the input video is output to the TV. You can also enjoy audio from the TV on this unit. How to connect a TV depends on the connectors and functions equipped on the TV. ARC (Audio Return Channel) function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable.
Contents Connections Playback Settings Tips Appendix Connection 1 : TV equipped with an HDMI connector and compatible with the ARC (Audio Return Channel) Use an HDMI cable to connect a TV that is compatible with the ARC function to this unit. Set “HDMI Control” to “On” when using a TV that supports the ARC function. (v p. 78) TV .
Contents Connections Playback Settings Tips Appendix Connection 2 : TV equipped with an HDMI connector and incompatible with the ARC (Audio Return Channel) Use an HDMI cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV IN OPTICAL OUT HDMI IN .
Contents Connections Playback Settings Tips Connection 3 : TV equipped without an HDMI connector Use a video cable to connect the TV to this unit. To listen to audio from TV on this unit, use an optical cable to connect the TV to this unit. TV OUT VIDEO IN OPTICAL OUT .
Contents Connections Playback Settings Tips Appendix Connecting a playback device This unit is equipped with two types of video input connectors (HDMI and composite video) and three types of audio input connectors (HDMI, digital audio and audio). Select input connectors on this unit according to the connectors equipped on the device you want to connect. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections.
Contents Connections Playback Settings Tips Connecting a set-top box (Satellite tuner/cable TV) This explanation uses the connection with a satellite tuner/cable TV STB as an example. Select the input connectors on this unit to match the connectors on the device that you want to connect to. (HDMI incompatible device) Satellite tuner / Cable TV AUDIO R VIDEO COAXIAL OUT AUDIO OUT R L Satellite tuner / Cable TV VIDEO OUT HDMI OUT L or L .
Contents Connections Playback Settings Tips Connecting a DVD player or Blu-ray Disc player This explanation uses the connection with a DVD player or Blu-ray Disc player as an example. When connecting a 4K / HDCP 2.2 compatible player, connect to either the HDMI 3, HDMI 4 or HDMI 5 input connector. DVD player / Blu-ray Disc player .
Contents Connections Playback Settings Tips Connecting a game console or video camcorder This explanation uses the connection with a game console as an example. Connect a playback device to this unit, such as a game console or video camcorder. Game console .
Contents Connections Playback Settings Tips Appendix Connecting a USB memory device to the USB port For operating instructions see “Playing a USB memory device” (v p. 40). USB memory device . MASTER VOLUME 0 Denon does not guarantee that all USB memory devices will operate or receive power. When using a portable USB hard disk drive (HDD) which came with an AC adapter, use that device’s supplied AC adapter. NOTE 0 USB memory devices will not work via a USB hub.
Contents Connections Playback Settings Tips Appendix Connecting an FM/AM antenna Connect the antenna, tune in to a broadcast and then move the antenna to the location where there is least noise. Then use tape, etc. to fix the antenna in this location. (“Listening to FM/AM broadcasts” (v p. 47)) AM loop antenna (supplied) 0 If you are unable to receive a good broadcast signal, we recommend installing an outdoor antenna. For details, inquire at the retail store where you purchased the unit.
Contents Connections Playback Settings Tips o AM loop antenna assembly o Using the AM loop antenna 1 Suspending on a wall Suspend directly on a wall without assembling. 2 Put the stand section through the bottom of the loop antenna from the rear and bend it forward. Insert the projecting part into the square hole in the stand. Stand Square hole . Nail, tack, etc. Loop antenna Standing alone Use the procedure shown above to assemble. When assembling, refer to “AM loop antenna assembly”. .
Contents Connections Playback Settings Tips Connecting the power cord After completing all the connections, insert the power plug into the power outlet. Power cord .
Contents Connections Playback Settings o Contents Tips Appendix Convenience functions Basic operation Convenience functions 52 HDMI control function 61 62 Turning the power on 38 Selecting the input source 38 Adjusting the volume of each channel to match the input source (Ch Level Adjust) Adjusting the volume 39 Sleep timer function 63 Turning off the sound temporarily (Muting) 39 Quick select plus function 65 Selecting a sound mode 57 Playback a device Playing a DVD player/Blu-r
Contents Connections Playback Settings Tips Appendix Basic operation Turning the power on 1 POWER X Input source select buttons Press POWER X to turn on power to the unit. 0 You can press the input source select button when the unit is in standby mode to turn on the power. 0 You can also switch the power to standby by pressing X on the main unit. Selecting the input source VOLUME df 1 MUTE : Press the input source select button to be played back.
Contents Connections Playback Settings Use VOLUME df to adjust the volume. The following describes the procedure for playing DVD player/Blu-ray Disc player. 1 0 The variable range differs according to the input signal and channel level setting. 0 You can also adjust the master volume by turning MASTER VOLUME on the main unit. 2 3 Turning off the sound temporarily (Muting) 1 Press MUTE :. 4 0 MUTE indicator on the display flashes. 0 : appears on the TV screen. Prepare for playback.
Contents Connections Playback Settings Tips Appendix Playing a USB memory device 0 Playing back music files stored on a USB memory device. 0 Only USB memory devices conforming to mass storage class standards can be played on this unit. 0 This unit is compatible with USB memory devices in “FAT16” or “FAT32” format. 0 The audio format types and specifications supported by this unit for playback are as follows. See “Playing back a USB memory devices” for details. (v p.
Connections Contents Playback Settings Playing files stored on USB memory devices 1 2 Tips Operation buttons Appendix Function Playback / Pause 1/3 Skip to previous track / Skip to next track 89 Connect the USB memory device to the USB port. (v p. 33) Playback / Pause ENTER Press USB to switch the input source to “USB”.
Contents Connections Playback Settings Tips Appendix Listening to music on a Bluetooth device Music files stored on Bluetooth devices such as smartphones, digital music players, etc. can be enjoyed on this unit by pairing and connecting this unit with the Bluetooth device. Communication is possible up to a range of about 32.8 ft/10 m. NOTE 0 To play back music from a Bluetooth device, the Bluetooth device needs to support the A2DP profile. Bluetooth ui ENTER OPTION BACK .
Contents Connections Playback Settings 3 Playing music from Bluetooth device In order to enjoy music from a Bluetooth device on this unit, the Bluetooth device must first be paired with this unit. Once the Bluetooth device has been paired, it does not need to be paired again. 1 Tips Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device. Connect to the Bluetooth device while “Pairing” is being displayed on the display of the unit.
Contents Connections Operation buttons 1/3 Playback Settings Function ENTER 0 To operate the Bluetooth device with the remote control of this unit, the Bluetooth device needs to support the AVRCP profile. 0 The remote control of this unit is not guaranteed to work with all Bluetooth devices. 0 Depending on the type of Bluetooth device, this unit outputs audio that is coupled to the volume setting on the Bluetooth device.
Contents Connections Playback Settings Pairing with other Bluetooth devices 3 4 Activate the Bluetooth settings on your mobile device. Press OPTION when the input source is “Bluetooth”. The option menu screen is displayed. Use ui to select “Pairing Mode”, then press ENTER. The device will go into the pairing mode. Select this unit when its name appears in the list of devices displayed on the screen of the Bluetooth device.
Contents Connections Playback Settings Tips Reconnecting to this unit from a Bluetooth device After pairing is completed, the Bluetooth device can be connected without performing any operations on this unit. This operation also needs to be performed when switching the Bluetooth device for playback. 1 2 3 4 If a Bluetooth device is currently connected, deactivate the Bluetooth setting of that device to disconnect it. Activate the Bluetooth setting of the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix Listening to FM/AM broadcasts You can use the built-in tuner of this unit to listen to FM broadcasts and AM broadcasts. Make sure the FM antenna and AM loop antenna are connected to this unit first. FM AM CH/PAGE df OPTION uio p ENTER MEMORY MODE .
Contents Connections Playback Settings 3 Listening to FM/AM broadcasts Press MODE to select the tune mode. AUTO (Default) : Automatically search for and tune to a receivable radio station. Press FM or AM to switch the input source to “FM” or “AM”. MANUAL: Manually change the frequency one step at a time each time the button is pressed. 4 G TV screen H Press TUNE + or TUNE - to select the station you want listen to. Scanning is performed until it finds an available radio station.
Contents Connections Playback Settings o Operations accessible through the option menu Tips Tuning in to stations and presetting them automatically (Auto Preset) 0 “Tuning in to stations and presetting them automatically (Auto Preset)” (v p. 49) A maximum of 56 radio stations can be automatically preset. 0 “Skipping preset broadcast stations (Preset Skip)” (v p. 51) 1 0 “Adjusting the tone (Tone)” (v p. 54) 0 “Displaying your desired video during audio playback (Video Select)” (v p.
Contents Connections Playback Settings Presetting the current broadcast station (Preset Memory) 2 3 4 Appendix Channel Default settings 1–8 92.10 / 92.30 / 92.50 / 92.70 / 93.10 / 93.50 / 93.70 / 94.10 MHz 9 – 16 94.30 / 94.50 / 94.70 / 94.90 / 95.10 / 95.30 / 95.50 / 95.70 MHz 17 – 24 Tune in the broadcast station you want to preset. (“Listening to FM/AM broadcasts” (v p. 48)) 98.10 / 98.30 / 98.50 / 98.70 / 98.90 / 99.10 / 100.10 / 100.30 MHz 25 – 32 100.50 / 100.70 / 100.90 / 101.
Contents Connections Playback Settings Skipping preset broadcast stations (Preset Skip) 2 3 1 2 Press OPTION when the input source is “FM” or “AM”. The option menu screen is displayed. While the “Preset Skip” screen is displayed, use ui to select a group of a broadcast stations to cancel the skip for. Use o p to select “On”. The skip is cancelled. Use ui to select “Preset Skip”, then press ENTER. The “Preset Skip” screen is displayed.
Contents Connections Playback Settings Tips Appendix Convenience functions This section explains how to use convenient functions that can be used for each input source. OPTION .
Contents Connections Playback Settings Performing repeat playback (Repeat) 2 3 4 n Supported input sources : USB / Bluetooth While content is playing, press OPTION. 1 The option menu screen is displayed. Use ui to select “Repeat”, then press ENTER. 2 3 Use o p to select repeat playback mode. Off (Default): Repeat playback mode is canceled. One: A file being played is played repeatedly. All: All files in the folder currently being played are played repeatedly.
Contents Connections Playback Settings 4 Adjusting the tone (Tone) Adjusts the tonal quality of the sound. 1 2 3 Press OPTION. The option menu screen is displayed. 5 Use ui to select “Tone”, then press ENTER. The “Tone” screen is displayed. Tips Appendix Select “On” in step 3 and press i to select the sound range to be adjusted. Bass: Adjust bass. Treble: Adjust treble. Use o p to adjust the tone, then press ENTER.
Contents Connections Playback Settings 3 Optimizing the night time listening volume (Night Mode) Tips Appendix Use o p to select “Night Mode”, then press ENTER. Compress dynamic range (difference between loud and soft sounds). This can be set when a Dolby Digital signal is input. Low : Set the adjusted value to low. Medium : Set the adjusted value to middle. 1 High : Set the adjusted value to high. Auto : Automatic dynamic range compression on/off control according to the source.
Contents Connections Playback Settings Tips Displaying your desired video during audio playback (Video Select) This unit can display video from a different source on TV during audio playback. You can set this for each input source. n Supported input sources : USB / FM / AM / Bluetooth 1 2 3 4 Press OPTION during audio playback. The option menu screen is displayed. Use ui to select “Video Select”, then press ENTER. Use o p to select the Video Select mode. Off (Default): Disable Video Select mode.
Contents Connections Playback Settings Tips Appendix Selecting a sound mode This unit allows you to enjoy various kinds of surround and stereo playback modes. Multi-channel audio formats are provided on popular movie and music disc formats such as Blu-ray and DVD, as well as being supported by digital broadcasting, and even by streaming movies. This unit supports playback of almost all of these multi-channel audio formats.
Contents Connections Playback Settings Tips Appendix o Description of sound mode types Dolby sound mode Sound mode type Description Dolby PLg This mode can be selected when the Dolby PLg decoder is used to play back 2-channel sources in 5.1-channel surround sound with an enveloping surround sound experience. Dolby Digital This mode can be selected when playing sources recorded in Dolby Digital. Dolby TrueHD This mode can be selected when playing sources recorded in Dolby TrueHD.
Contents Connections Playback Settings Tips Appendix Original sound mode Sound mode type Description Multi Ch Stereo This mode is for enjoying stereo sound from all speakers. Virtual This mode lets you experience an expansive surround sound effect when playing back through just the front (L/R) speakers only, and when listening with stereo headphones. Stereo sound mode Sound mode type Stereo Description This mode plays 2-channel stereo audio with no additional surround sound processing.
Contents Connections Playback Settings Tips o Views on the display . DD q DVD w A Shows a decoder to be used. 0 In the case of the Dolby Digital decoder, “ 0 In the case of the Dolby Digital Plus decoder, “ ” is displayed. ” is displayed. B Shows the name of the input source being played back.
Contents Connections Playback Settings Tips Appendix HDMI control function A recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate with another device via the HDMI cable connection. Setting procedure 1 2 3 5 Enable the HDMI control function of this unit. Set “HDMI Control” to “On”. (v p. 78) Turn the power on for all the devices connected by HDMI cable.
Contents Connections Playback Settings Tips Appendix Adjusting the volume of each channel to match the input source (Ch Level Adjust) The volume of each channel can be changed while listening to music. You can set this for each input source. 1 2 3 Press CH LEVEL. The “Ch Level Adjust” screen is displayed. Use ui to select the channel that you wish to adjust. Use o p to adjust the volume. –12.0 dB – +12.0 dB (Default : 0.
Contents Connections Playback Settings Tips Appendix Sleep timer function You can have the power automatically switched to standby once a set time has elapsed. This is convenient for viewing and listening while going to sleep. .
Contents Connections Playback Settings Appendix o Checking the remaining time Using the sleep timer 1 Tips Press SLEEP when the sleep timer is in operation. The remaining time appears on the display. Press SLEEP and display the time you want to set. o To cancel the sleep timer 0 The SLEEP indicator lights up on the display and the sleep timer starts. 0 You can set the sleep timer in the range from 10 to 120 minutes in steps of 10 minutes. Press SLEEP to select “Off”.
Contents Connections Playback Settings Tips Appendix Quick select plus function Settings such as the input source, volume level and sound mode can be registered to the QUICK SELECT 1 - 4 buttons. You can simply press one of the registered QUICK SELECT buttons in subsequent playbacks to switch to the group of saved settings in a batch. By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment. .
Contents Connections Playback Settings Calling up the settings 1 1 Press QUICK SELECT. Input source QUICK SELECT 1 CBL/SAT QUICK SELECT 2 DVD/Blu-ray QUICK SELECT 3 Game QUICK SELECT 4 Bluetooth Set the items below to the settings you want to register. A Input source (v p. 38) B Volume (v p. 39) C Video Select settings (v p. 56) D Sound mode (v p. 57) 0 The default settings for the input source are as shown below.
Contents Connections Playback Settings Tips Appendix Menu map When using menu operations, connect this unit to a TV and operate this unit while viewing the TV. The recommended settings are configured for this unit by default. You can customize this unit based on your existing system and your preferences. Setting items Detailed items Description Page Adjusts surround sound parameters.
Contents Playback Settings Detailed items Tips Description Appendix Page Input Assign Changes input connector assignment. 81 Source Level Adjusts the playback level of the audio input. 81 Input Select Sets the audio input mode and decode mode. 82 Auto Setup The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. 83 Manual Setup Sets up the speakers manually or changes the “Auto Setup” settings. 88 .
Contents Connections . Setting items Settings Detailed items Tips Page Language Changes the language of the display on the TV screen. 92 ECO Configures the ECO Mode and Auto Standby energy-saving functions. 92 Bluetooth Configures the Bluetooth settings. 94 Front Display Makes settings related to the display on this unit. 95 Firmware Update the firmware of this unit. 95 Setup Lock Protects settings from inadvertent changes.
Contents Connections Playback Settings Tips Appendix Menu operations 1 2 3 4 Press SETUP. The menu is displayed on the TV screen. Use ui to select the menu to be set or operated, then press ENTER. Use o p to change to desired setting. Press ENTER to enter the setting. 0 To return to the previous item, press BACK. 0 Exiting the menu, press SETUP while the menu is displayed. The menu display disappears. uio p ENTER SETUP .
Contents Connections Playback Settings Tips Appendix Audio Make audio-related settings. o Mode Surr.Parameter Set the sound mode according to the input signal. You can adjust the surround audio sound field effects to match your preferences. The items (parameters) that can be adjusted depend on the signal being input and the currently set sound mode. For details on the adjustable parameters, see “Sound modes and surround parameters” (v p. 120).
Contents Connections Playback Settings Tips Appendix o Low Frequency o Dynamic Comp. Adjust the low frequency effects level (LFE). Compress dynamic range (difference between loud and soft sounds). Auto: Automatic dynamic range compression on/off control according to source. Low / Medium / High: These set the compression level. Off: Dynamic range compression is always off. -10 dB – 0 dB (Default : 0 dB) 0 For proper playback of the different sources, we recommend setting to the values below.
Contents Connections Playback Settings o Panorama Tips Appendix o Dimension The front sound field is expanded further towards the back to create a seamlessly inclusive sound impression. On: Use “Panorama”. Off (Default): Do not use “Panorama”. Shift sound image center to front or rear to adjust playback balance. 0 – 6 (Default : 3) 0 You can set this when the sound mode is Dolby PLg in the “Music” mode.
Contents Connections Playback Settings o Subwoofer Tips Appendix Restorer Turn subwoofer output on and off. On (Default): The subwoofer is used. Off: The subwoofer is not used. Compressed audio formats such as MP3, WMA (Windows Media Audio) and MPEG-4 AAC reduce the amount of data by eliminating signal components that are hard for the human ear to hear.
Contents Connections Playback Settings Appendix o Limit Audio Delay Make a setting for maximum volume. Compensates for incorrect timing between video and audio. 60 (–20 dB) / 70 (–10 dB) / 80 (0 dB) 0 ms – 200 ms (Default : 0 ms) Off (Default) 0 “Audio Delay” settings are stored for each input source. 0 The “Audio Delay” settings can be set even if AUDIO DELAY + or AUDIO DELAY is pressed on the remote control unit. 0 The dB value is displayed when the “Scale” setting is “ –79.5 dB – 18.0 dB”.
Contents Connections Playback Settings o Mute Level Tips Appendix Room EQ Set the amount of attenuation when muting is on. Set whether to use the equalizer or not. Full (Default): The sound is muted entirely. On: Use “Room EQ”. –40 dB : The sound is attenuated by 40 dB down. Do not use “Room EQ”. –20 dB : The sound is attenuated by 20 dB down. Off (Default): 0 This item can be selected after Auto Setup has been performed.
Contents Connections Playback Settings Tips Appendix Video Make settings for HDMI Audio Out, HDMI PassThrough and HDMI Control settings. NOTE 0 When “HDMI PassThrough” and “HDMI Control” is set to “On”, it consumes more standby power. (“HDMI PassThrough” (v p. 77), “HDMI Control” (v p. 78)) If you are not using this unit for an extended period, it is recommended that you unplug the power cord from the power outlet. HDMI Audio Out HDMI PassThrough Select HDMI audio output device.
Contents Connections Playback Settings Pass Source Tips Appendix HDMI Control You can link operations with devices connected to HDMI and compatible with HDMI Control. Sets the HDMI connector that inputs HDMI signals when in standby. Last: The most recently used input source will go into standby mode. CBL/SAT / DVD/Blu-ray / Game / Media Player (Default : CBL/SAT): Pass through the selected input source. On: Use HDMI control function. Off (Default): Do not use HDMI control function.
Contents Connections Playback Settings ARC Tips Appendix TV Audio Switching On the TV connected to the HDMI MONITOR connector, set whether to receive sound from the TV via HDMI. Sets automatic switching to the “TV Audio” input when a TV connected via HDMI sends an appropriate CEC control command to this unit. On: Use ARC function. Off (Default): Do not use ARC function. On (Default): Select the “TV Audio” input automatically when receiving a command from the TV.
Contents Connections Playback Settings Tips Pow.Off Control Links the power standby of this unit to external devices. All (Default): If power to a connected TV is turned off independently of the input source, power to this unit is automatically set to standby. Video: With an input source being selected that is equipped “HDMI”, when you turn the power of the TV off, power to this unit is automatically set to standby. Off: This unit does not link with power to a TV. 0 “Pow.
Contents Connections Playback Settings Tips Appendix Inputs Perform settings related to input source playback. You do not have to change the settings to use the unit. Make settings when needed. Input Assign 0 By default, each item is set as follows. By making connections as indicated by the input sources printed on the audio/video input connectors of this unit, you can just press one of the input source select buttons to easily play back audio or video from a connected device.
Contents Connections Playback Settings Tips o Decode Mode Input Select Set the audio decode mode for input source. It is normally recommended to set the audio input mode to “Auto”. But we recommend changing it to “PCM” or “DTS” if the start of the source is clipped or noise occurs. Set the audio input mode and decode mode of each input source. The input modes available for selection may vary depending on the input source. 0 “Input Select” settings are stored for each input source.
Contents Connections Playback Settings Tips Appendix Speakers The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Auto Setup”. You do not have to perform “Auto Setup” when you have already performed “Speaker Setup” in “Setup Assistant”. To set up the speakers manually, use “Manual Setup” on the menu. (v p.
Contents Connections Playback Settings Tips NOTE 0 Make the room as quiet as possible. Background noise can disrupt the room measurements. Close windows and turn off the power on electronic devices (radios, air conditioners, fluorescent lights, etc.). The measurements could be affected by the sounds emitted by such devices. 0 During the measurement process, place cell phones outside the listening room. Cell phone signals could disrupt the measurements.
Contents Connections Playback Settings 1 Procedure for speaker settings (Auto Setup) Tips Appendix Mount the Sound calibration microphone on a tripod and place it in the main listening position. When installing the Sound calibration microphone, point the tip of the microphone toward the ceiling and adjust the height to match the height of the ears of a listener in a seated position.
Contents 3 Connections Playback Settings 5 6 Connect the Sound calibration microphone to the SETUP MIC jack of this unit. Tips Appendix Select “Next”, then press ENTER. Select “Begin Test”, then press ENTER. 0 Measurement requires several minutes. NOTE 0 If “Caution!” is displayed on TV screen: 0 Go to “Error messages” (v p. 87). Check any related items, and perform the necessary procedures.
Contents Connections Playback Settings Tips Appendix Error messages An error message is displayed if “Auto Setup” could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, perform the necessary measures. Be sure to turn off the power before checking speaker connections. Examples Front L: None Front panel Error details Measures 0 The displayed speaker could not be detected.
Contents Connections Playback Settings Manual Setup Tips Appendix Speaker Config. Select whether or not speakers are present, playback capacity for low bass frequencies and speaker size. Perform when setting the speakers manually or when changing settings made in “Auto Setup”. 0 This unit can be used without changing “Manual Setup” settings. Please set if necessary. o Front Set the front speaker size. Large: Use a large speaker that can adequately play back very low bass frequencies.
Contents Connections Playback Settings o Center Appendix Distances Set the presence and size of the center speaker. Large: Use a large speaker that can adequately play back very low bass frequencies. Small (Default): Use a small speaker that has inadequate playback capacity for very low bass frequencies. None: Select when a center speaker is not connected. Set distance from listening position to speakers. Measure beforehand the distance from the listening position to each speaker.
Contents Connections Playback Settings Levels Tips Appendix Crossovers Set the volume of the test tone to be the same at the listening position when it is output from each speaker. Set in accordance with the lower limit frequency of the base frequencies that can be played back through each speaker. o Test Tone Start o Set the crossover frequency A test tone is output from the selected speaker. While listening to the test tone, adjust the volume output from the selected speaker.
Contents Connections Playback Settings Tips o LPF for LFE Bass Set LFE signal playback range. Set this when you want to change the playback frequency (low pass filter point) of the subwoofer. Set subwoofer and LFE signal range playback. o Subwoofer Mode 80 Hz / 90 Hz / 100 Hz / 110 Hz / 120 Hz/ 150 Hz / 200 Hz / 250 Hz (Default: 100 Hz) Select low range signals to be reproduced by subwoofer.
Contents Connections Playback Settings Tips Appendix General Make various other settings. Language ECO Set the language for display the menu on the TV screen. Configure the settings of the ECO Mode and auto standby mode. English / Français / Español (Default : English) o ECO Mode This mode can reduce the power consumption when the power of the unit is on. 0 “Language” can also be set up by the following operation. However, the menu screen is not displayed.
Contents Connections Playback Settings o Pow.On Default Appendix o Auto Standby Set the mode to ECO when the power is on. Last (Default): The ECO Mode will be set to the previous setting before the power was switched off. On: When power is turned on, the mode will always be switched to the “ECO Mode” in “On”. Auto: When power is turned on, the mode will always be switched to the “ECO Mode” in “Auto”. Off: When power is turned on, the mode will always be switched to the “ECO Mode” in “Off”.
Contents Connections Playback Settings Tips o Auto-Select Bluetooth Set whether to automatically switch the source input to “Bluetooth” when performing the connection operation from a Bluetooth device. Configures the Bluetooth settings. o BluetoothStandby Set whether or not to turn the unit’s power on when a Bluetooth device is operated. On (Default): Turns the Bluetooth standby function on. Off: Turns the Bluetooth standby function off.
Contents Connections Playback Settings Tips Firmware Front Display When new firmware is supplied, update this unit using the USB port. Use a USB memory device to update the firmware. Adjust the display brightness of this unit. o Dimmer Bright (Default): Normal display brightness. Dim: Reduced display brightness. Dark: Very low display brightness. Off: Turns the display off. o Update Start Start the firmware update.
Contents Connections Playback Settings Tips Reset Setup Lock All settings are reset to the factory default values. Protect settings from inadvertent changes. o Lock On: Turn protection on. Off (Default): Turn protection off. 0 Perform the following operations to set “Lock” to “Off”. 1. Press and hold SETUP for more than 3 seconds. “Setup Lock:0On1” appears on the display. 2. Use o p to select “Off”, then press ENTER.
Contents Connections Playback Settings Tips Appendix Checking the information Information on the main unit’s various settings (Status) and on input signals (Audio Input Signal) is shown on the display. 1 Press INFO. The information screen is displayed. 0 Press INFO to display current input source name, volume, sound mode, and other information at the bottom of the screen. INFO SOURCE SOURCE SOUND ROOM EQ Bluetooth Multi Ch Stereo Digital Off . 40.
Contents Connections Playback Settings o Contents Tips Appendix Troubleshooting Tips I want the volume not to become too loud by mistake 99 Power does not turn on / Power is turned off 101 Operations cannot be performed through the remote control unit 102 Display on this unit shows nothing 102 No sound comes out 103 Desired sound does not come out 104 Sound is interrupted or noise occurs 106 I want to keep the volume at the same level when I turn the power on 99 I want to have the su
Contents Connections Playback Settings Tips Appendix Tips I want the volume not to become too loud by mistake 0 Set the volume upper limit for “Limit” in the menu beforehand. This prevents children or others from increasing the volume too much by mistake. (v p. 75) I want to keep the volume at the same level when I turn the power on 0 By default, the volume setting when power was previously set to standby on this unit is applied at next power on with no change.
Contents Connections Playback Settings Tips Appendix Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? 0 If steps 1 to 3 above do not improve the problem, restarting the device may improve the problem. Continue pressing the X button on the unit until “Restart” appears in the display, or remove and re-insert the power cord of the unit.
Contents Connections Playback Settings Tips Appendix o Power does not turn on / Power is turned off Symptom Cause / Solution Page Power does not turn on. 0 Check whether the power plug is correctly inserted into the power outlet. 36 Power automatically turns off. 0 The sleep timer is set. Turn on the power again. 63 0 “Auto Standby” is set. “Auto Standby” is triggered when there is no operation for a set amount of time. To 93 Power turns off and the power indicator flashes in red approx.
Contents Connections Playback Settings Tips Appendix o Operations cannot be performed through the remote control unit Symptom Operations cannot be performed through the remote control unit. Cause / Solution Page 0 Batteries are worn out. Replace with new batteries. 6 0 Operate the remote control unit within a distance of about 23 ft/7 m from this unit and at an angle of within 6 30°. 0 Remove any obstacle between this unit and the remote control unit.
Contents Connections Playback Settings Tips Appendix o No sound comes out Symptom No sound comes out of speakers. Cause / Solution Page 0 Check the connections for all devices. 22 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Check that speaker cables are properly connected. Check that cable core wires come in contact with the 22 0 Securely tighten the speaker terminals.
Contents Connections Playback Settings Tips Appendix o Desired sound does not come out Symptom The volume does not increase. Cause / Solution Page 0 The maximum volume is set too low. Set the maximum volume using “Limit” on the menu. 75 0 Appropriate volume correction processing is performed according to the input audio format and settings, － 0 Check the connection of the HDMI connectors. 26 0 When outputting HDMI audio from the speakers, set “HDMI Audio Out” on the menu to “AVR”.
Contents Connections Playback Symptom “Restorer” cannot be selected. Front panel Settings Tips Cause / Solution Appendix Page 0 Check that an analog signal or PCM signal (Sample Rate = 44.1/48 kHz) is input. For playback of 74 0 Switch to a sound mode other than “Direct”. 57 multichannel signals such as Dolby Digital or DTS surround, “Restorer” cannot be used.
Contents Connections Playback Settings Tips Appendix o Sound is interrupted or noise occurs Symptom Cause / Solution Page During playback from the USB memory device, sound is occasionally interrupted. 0 When the transfer speed of the USB memory device is slow, sound may occasionally be interrupted. － Noise often occurs in FM/AM broadcasting. 0 Change the antenna orientation or position. 34 The sounds appear to be distorted. 0 Separate the AM loop antenna from the unit.
Contents Connections Playback Settings Tips Appendix o No video is shown on the TV Symptom No picture appears. 0 Check the connections for all devices. Cause / Solution Page 26 0 Insert connection cables all the way in. － 0 Check that input connectors and output connectors are not reversely connected. － 0 Check cables for damage. － 0 Match the input settings to the input connector of the TV connected to this unit. 81 0 Check that the proper input source is selected.
Contents Connections Playback Settings Tips Appendix o The menu screen is not displayed on the TV Symptom The menu screen or status information screen is not displayed on the TV. Cause / Solution Page 0 The menu screen is only displayed on this unit and a TV connected with an HDMI cable. If this unit is － 0 The status information will not appear on the TV when the following video signals are being played.
Contents Connections Playback Settings Tips Appendix o USB memory devices cannot be played back Symptom “No connection” is displayed. Cause / Solution Page 0 This unit cannot recognize the USB memory device. Disconnect and reconnect the USB memory device. 33 0 Mass storage class compatible USB memory devices are supported. － 0 This unit does not support a connection through a USB hub. Connect the USB memory device directly to － 0 The USB memory device must be formatted to FAT16 or FAT32.
Contents Connections Playback Settings Tips Appendix o File names on the USB memory device are not displayed properly Symptom The file names are not displayed properly (“...”, etc.). Cause / Solution Page 0 Characters that cannot be displayed have been used. On this unit, characters that cannot be displayed are replaced with a “. (period)”. － o Bluetooth cannot be played back Symptom Bluetooth devices cannot be connected to this unit. The sound is cut off.
Contents Connections Playback Settings Tips Appendix o The HDMI control function does not work Symptom The HDMI control function does not work. Cause / Solution Page 0 Check that “HDMI Control” in the menu is set to “On”. 78 0 You cannot operate devices that are not compatible with the HDMI control function. In addition, 61 0 Check that the HDMI control function setting is enabled on all devices connected to this unit.
Contents Connections Playback Settings Tips Appendix Resetting factory settings Perform this procedure if the display is abnormal or if operations cannot be performed. Various settings are reset to the factory default values. Make settings again. X 1 2 TUNER PRESET CH + . 3 Front panel Turn off the power using X. Press X while simultaneously pressing SOUND MODE 1 and TUNER PRESET CH +. Release the two buttons when the display starts flashing at intervals of about 1 second.
Contents Connections Playback Settings Tips Appendix About HDMI HDMI is an abbreviation of High-Definition Multimedia Interface, which is an AV digital interface that can be connected to a TV or amplifier. With the HDMI connection, high definition video and high quality audio formats adopted by Blu-ray Disc players (Dolby Digital Plus, Dolby TrueHD, DTS-HD, DTS-HD Master Audio) can be transmitted, which is not possible with the analog video transmission.
Contents Connections Playback Settings 0 HDMI Control 0 ARC (Audio Return Channel) If you connect the unit and an HDMI control function compatible TV or player with an HDMI cable and then enable the HDMI control function setting on each device, the devices will be able to control each other. 0 Power off link This unit power off can be linked to the TV power off step. 0 Audio output destination switching From the TV, you can switch whether to output audio from the TV or the AV amplifier.
Contents Connections Playback Settings o Supported audio formats 2-channel Linear PCM 2-channel, 32 kHz – 192 kHz, 16/20/24 bit 7.1-channel, 32 kHz – 192 kHz, 16/20/24 bit In order to play back digital video and audio such as BD video or DVD video via HDMI connection, both this unit and the TV or player must to support the copyright protection system known as HDCP (Highbandwidth Digital Content Protection System).
Contents Connections Playback Settings Tips Appendix Playing back a USB memory devices 0 This unit is compatible with MP3 ID3-Tag (Ver. 2) standard. 0 This unit can show the artwork that was embedded by using MP3 ID3-Tag Ver. 2.3 or 2.4. 0 This unit is compatible with WMA META tags. 0 If the image size (pixels) of an album artwork exceeds 500 × 500 (WMA/MP3) or 349 × 349 (MPEG-4 AAC), then music may not be played back properly.
Contents Connections Playback Settings The limits on the number of folders and files that can be displayed by this unit are as follows. Media Memory capacity USB memory device 16 levels Number of folders 99 filesz2 999 Number of This unit supports the following Bluetooth profile. 0 A2DP (Advanced Audio Distribution Profile): When a Bluetooth device that supports this standard is connected, monaural and stereo sound data can be streamed at a high quality.
Contents Connections Playback Settings Tips Personal memory plus function The most recently used settings (input mode, HDMI output mode, sound mode, tone control, channel level, Restorer and audio delay, etc.) are saved for each input source. 0 “Surr.Parameter” and “Tone” settings are stored for each sound mode. Last function memory This function stores the settings which were made before going into the standby mode.
Contents Connections Playback Settings Tips Appendix Sound modes and channel output . S This indicates the audio output channels or surround parameters that can be set. D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v p.
Contents Connections Playback Settings Tips Appendix . Sound modes and surround parameters Surr.Parameter Sound mode Direct (2-channel) Direct (Multi-channel) Stereo Multi Ch In Dolby Pro Logic g DTS Neo:6 Dolby Digital Dolby Digital Plus Dolby TrueHD DTS Surround DTS 96/24 DTS-HD DTS Express Multi Ch Stereo Virtual z1 z2 z3 z4 Mode Dynamic Comp.
Contents Connections Playback Settings Tips Appendix Types of input signals, and corresponding sound modes . F This indicates the default sound mode. S This indicates the selectable sound mode.
Contents Connections Playback Settings Tips Appendix Explanation of terms o Dolby Dolby Pro Logic g Dolby Pro Logic g is a matrix decoding technology developed by Dolby Laboratories. Regular music such as that on CDs is encoded into 5-channels to achieve an excellent surround effect.
Contents Connections Playback Settings o DTS Tips Appendix DTS-HD High Resolution Audio This is an abbreviation of Digital Theater System, which is a digital audio system developed by DTS. DTS delivers a powerful and dynamic surround sound experience, and is found in the world’s finest movie theaters and screening rooms. DTS-HD High Resolution Audio is an improved version of the conventional DTS, DTS-ES and DTS 96/24 signals formats, compatible with sampling frequencies of 96 or 48 kHz and up to 7.
Contents Connections Playback Settings o Audio Tips Appendix THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
Contents Connections Playback Settings Tips Appendix MPEG (Moving Picture Experts Group), MPEG-2, MPEG-4 Speaker impedance These are the names for digital compression format standards used for the encoding of video and audio. Video standards include “MPEG-1 Video”, “MPEG-2 Video”, “MPEG-4 Visual”, “MPEG-4 AVC”. Audio standards include “MPEG-1 Audio”, “MPEG-2 Audio”, “MPEG-4 AAC”. This is an AC resistance value, indicated in Ω (ohms). Greater power can be obtained when this value is smaller.
Contents Connections Playback Settings o Others Tips Appendix Pairing Pairing (registration) is an operation that is required in order to connect a Bluetooth device to this unit using Bluetooth. When paired, the devices authenticate each other and can connect without mistaken connections occurring. When using Bluetooth connection for the first time, you need to pair this unit and the Bluetooth device to be connected.
Contents Connections Playback Settings Tips Appendix . Trademark information . The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by D&M Holdings Inc. is under license. Other trademarks and trade names are those of their respective owners. Front panel Display Rear panel .
Connections Playback Settings Tips . Contents . For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the Symbol, DTS and the Symbol together, DTS-HD, and the DTS-HD logo are registered trademarks and/or trademarks of DTS, Inc. in the United States and/or other countries. © DTS, Inc. All Rights Reserved.
Contents Connections Playback Settings Tips Specifications o Audio section 0 Power amplifier Rated output: Front: 70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 70 W + 70 W (8 Ω/ohms, 20 Hz – 20 kHz with 0.08 % T.H.D.) 90 W + 90 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.
Contents Connections o Tuner section Playback Settings [FM] Tips Appendix [AM] (Note: μV at 75 Ω/ohms, 0 dBf = 1 x 10 –15 W) Reception frequency range: 87.5 MHz – 107.9 MHz 520 kHz – 1710 kHz Effective sensitivity: 1.2 μV (12.8 dBf) 18 μV 50 dB sensitivity: MONO ― 2.8 μV (20.2 dBf) S/N ratio: MONO ― 70 dB (IHF–A weighted, Direct mode) STEREO ― 67 dB (IHF–A weighted, Direct mode) Distortion: MONO ― 0.7 % (1 kHz) STEREO ― 1.
Contents Connections Playback Settings Tips o General Power supply: AC 120 V, 60 Hz Power consumption: 310 W Power consumption in standby mode: 0.1 W Power consumption in CEC standby mode: 0.5 W Power consumption when Bluetooth standby is used: 1W For purposes of improvement, specifications and design are subject to change without notice.
Contents Connections Playback Settings Tips Appendix 1 7/8 (47) 7 7/8 (197) 1 3/4 (44) 12 5/8 (319) 3/4 (19) 11 3/8 (288) 1/2 (12) o Dimensions (Unit : in. (mm)) 2 3/8 (60) 13 5/8 (344) 6 (151) 1 7/8 (45) . 1 7/8 (45) 5/8 (15) 5 3/8 (136) 17 1/8 (434) o Weight: 16 lbs 12 oz (7.
Contents Connections Index Playback Settings vD v Numerics 3D ................................................................ 113 4K ................................................................ 113 5.1-channel .............................................. 21, 24 vA Audio settings ........................................... 67, 71 Auto Standby ................................................. 93 vH HDCP ........................................................... 115 Display ....................
Contents Connections vO Settings vS Original sound mode ...................................... 59 Pairing ...................................................... 43, 45 PCM multi-channel sound mode .................... 58 Protection circuit .......................................... 126 Setup Assistant .............................................. 69 Sleep timer ..................................................... 63 Sound mode ................................... 57, 119, 120 Speaker connection ....
. www.denon.com 135 3520 10576 00AD Copyright © 2018 D&M Holdings Inc. All Rights Reserved.
