Graphical User Interface Use this manual in combination with the operating guide displayed on the GUI screen.
n SAFETY PRECAUTIONS • DECLARATION DE CONFORMITE CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
n NOTE ON USE / HINWEISE ZUM GEBRAUCH / OBSERVATIONS RELATIVES A L’UTILISATION / NOTE SULL’USO / NOTAS SOBRE EL USO / ALVORENS TE GEBRUIKEN / OBSERVERA ANGÅENDE ANVÄNDNINGEN CAUTION: • The ventilation should not be impeded by covering the ventilation openings with items, such as newspapers, tablecloths, curtains, etc. No naked flame sources, such as lighted candles, should be placed on the unit. Observe and follow local regulations regarding battery disposal.
A NOTE ABOUT RECYCLING: This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with the local recycling regulations. When discarding the unit, comply with local rules or regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with the local regulations concerning battery disposal.
Contents Getting Started Accessories······················································································3 Cautions on Handling······································································3 Cautions on Installation··································································3 About the Remote Control Unit·····················································3 Inserting the Batteries································································3, 4 Operating Range of the Remot
Parameter Audio······························································································48 a Surround Parameters·······················································48 ~ 50 s Tone···················································································50, 51 d Room EQ·················································································51 f Dynamic EQ·············································································51 g RESTORER·························
• Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Getting Started (RC-1067) (RC-1070) • Cautions on using mobile phones Using a mobile phone near this unit may result in noise. If so, move the mobile phone away from this unit when it is in use. • Moving the unit Turn off the power and unplug the power cord from the power outlet.
Getting Started NOTE Connections Setup Playback Remote Control • Replace the batteries with new ones if the set does not operate even when the remote control unit is operated close to the unit. • The supplied batteries are only for verifying operation. • When inserting the batteries, be sure to do so in the proper direction, following the “q” and “w” marks in the battery compartment. • To prevent damage or leakage of battery fluid: • Do not use a new battery together with an old one.
GWith the door openH W7 W6 W5 W4 W3 W2 W1 W0 Q9 Q8 Q7 Q6 Q5 Getting Started W9 W8 Display Q4 Q3 Q8 Q7 Q6 Q5 Q4 Q3 Q2 Q0 Q1 o i u y Connections Setup w er t y u Q0 Q1 Q2 w q Input signal indicators w Input signal channel indicators These light when digital signals are input. e Information display The input source name, surround mode, setting values and other information are displayed here.
Getting Started Rear Panel Q8 u Q7 Q6 Q5 Q4 Q3 Q2 Q1 Q0 o i u Connections Setup Playback Remote Control Multi-Zone Q9 W0 W1 Information Troubleshooting q w q CONTROL LINK connector···························(11) w RS-232C connector······································ (22) e Analog audio connectors (AUDIO)············· (14) r RCA PRE OUT connectors······················(11, 21) t AC inlet (AC IN)············································ (22) y AC OUTLET···································
n Main remote control unit (RC-1067) Q5 Q6 Q7 o W2 W0 W1 HOME button········································· (31, 66) Q3 Channel buttons (CH)···························· (55, 67) Q4 Input source select / Number buttons··· (42, 54) Q5 Remote control signal transmitter··············· (4) Q6 Device select indicators (DEV1 / DEV2)···· (66) Q7 ZONE3 / ZONE4 select indicators (Z3 / Z4)························································ (76) W3 W4 W6 Q4 W7 ENTER button······························
Getting Started Preparations Connections Connections Setup Connections for all compatible audio and video signal formats are described in these operating instructions. Please select the types of connections suited for the equipment you are connecting. With some types of connections, certain settings must be made on the AVP-A1HD. For details, refer to the instructions for the respective connection items below. Cables Used for Connections Select the cables according to the equipment being connected.
ZONE3 • This function automatically converts various formats of video signals input to the AVP-A1HD into the format used to output the video signals from the AVP-A1HD to a monitor.
Getting Started Connecting to the Power Amp Speaker Layout The illustration below shows a basic example of installation of the amplifier combined with 8 speakers and a monitor. Subwoofer Center speaker Connections Surround back speakers • Connect the AVP-A1HD pre-out terminal to the power amp (sold separately). • AVP-A1HD has a RCA pre-out terminal and XLR pre-out terminal. Connect accordingly with the power amp you want to use.
Connections When using Subwoofer 2 or 3, set GUI menu “Manual Setup” – “Speaker Setup” – “Subwoofer Setup” (vpage 28). n Connecting the RCA pre-out terminal (Example : 9.3-channels) Subwoofer 3 b L : Left R : Right Subwoofer 3 */ */ Connections b L : Left R : Right Subwoofer 2 Subwoofer 1 Subwoofer with built-in amplifier */ Subwoofer 1 Subwoofer 2 Getting Started n Connecting the XLR pre-out terminal (Example : 9.
Getting Started Operations 1 Connect AVP-A1HD and POA-A1HD with the control link cable. Connections b The control link cable is included with the POA-A1HD. b AVP-A1HD can be connected and control to up to 2 POA-A1HD units. Refer to the POA-A1HD user’s manual for how to connect. Setup Playback 2 3 Set the POA-A1HD’s control selector switch to “AVP”. Connecting Equipment with HDMI connectors With HDMI connections, the video and audio signals can be transferred with a single cable.
• Connect the cables to be used (vpage 9 “Video Conversion Function”). • With HDMI connections, the video and audio signals can be transferred with a single cable. • To output the audio signals to the monitor with HDMI connections, set GUI menu “Manual Setup” – “HDMI Setup” – “Audio” to “TV” (vpage 31). Monitor 4 7*%&0 */ $0.10/&/5 7*%&0 */ : 1# 13 )%.* */ Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly.
Getting Started Record Player CD Player Turntable (MM cartridge) iPod® Connect the cables to be used. CD player "6%*0 Connections 9-3 065 3 "6%*0 065 3 $0"9*"065 Use a DENON Control Dock for iPod (ASD-1R, sold separately) to connect the iPod to the AVP-A1HD. For instructions on the Control Dock for iPod settings, refer to the Control Dock for iPod’s operating instructions.
Satellite Receiver Connect the cables to be used. Connect the cables to be used. TV tuner DBS / BS tuner 7*%&0 4 7*%&0 065 $0.10/&/5 7*%&0 065 : 1# 13 7*%&0 "6%*0 015*$"065 "6%*0 065 3 7*%&0 065 4 7*%&0 065 $0.10/&/5 7*%&0 065 : 1# 13 "6%*0 )%.
Getting Started Connecting the Recording Components Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Connections Digital Video Recorder Connect the cables to be used. Digital video recorder Setup 7*%&0 7*%&0 065 4 7*%&0 065 "6%*0 $0.10/&/5 7*%&0 065 : 1# 13 )%.
CD Recorder / MD Recorder / Tape Deck Connect the cables to be used. Make analog connections if you wish to record analog audio signals, or digital connections if you wish to record digital audio signals, depending on the types of connectors on the components being used.
Getting Started Connections to Other Devices Carefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnect correctly. Video Camera / Game Console Video camera / Game console 7*%&0 Connections 4 7*%&0 065 Components Equipped with a DENON LINK connector Setup Multi-channel playback is possible with DVD-Audio discs, Super Audio CD, etc.
n Front panel USB memory device Getting Started USB Port n Rear panel USB memory device Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting • In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel. • To change the port to be used, see “USB Select” on page 46. • For instructions on playing the files on a USB memory device, see page 60, 61. NOTE • Set to the USB port you want to use.
Getting Started Required system Network Audio n Broadband Internet connection A broadband line connection to the Internet is required in order to use the AVP-A1HD’s Internet radio function and firmware update. [Wired LAN] Connections Modem Computer Internet n Modem This is a device that is connected to the broadband line to communicate with the Internet. Some are integrated with the router.
ZONE2 or ZONE3 Pre-out Connections Monitor Monitor 7*%&0 "6%*0 7*%&0 */ 4 7*%&0 */ $0.10/&/5 7*%&0 */ : 1# 13 7*%&0 "6%*0 7*%&0 */ "6%*0 */ 3 R L R L R L R "6%*0 "6%*0 015*$" */ 015*$" */ Multi-Zone L AV amplifier (ZONE4) Remote Control "6%*0 */ 3 Power amplifier AV amplifier (ZONE2) Playback ZONE3 Power amplifier The AVP-A1HD is equipped with Optical output connectors for ZONE2 and ZONE4. If a bit-stream amp is rigged-up, these zones can also be used to enjoy home theater.
Getting Started Connecting the Power Cord External Controller Wait until all connections have been completed before connecting the power cord. Connections Power cord (included) To household power outlet (AC 230 V, 50 Hz) RS-232C connector Setup This connector is used for an external controller. Playback b If you use an external controller to operate the unit via the RS-232C terminal, you must confirm the following beforehand. q Turn on the AVP-A1HD’s power.
GUI Menu Operations Switch to the next item Selected item name Example: Menus with Illustrations (Auto Setup) Operation guidance text Operation step indicators 7.1 5.1 The same operation is possible on the main unit or remote control unit. STEP1 Speaker Detection Please place the microphone at ear height at main listening position. 1 2 3 4 5 Illustration 1 Press the MENU button. The GUI menu is displayed.
Getting Started GUI Menu Map Source Select (vpage 42 ~ 46) Connections Setup Playback n DVD, HDP, TV/CBL, SAT, VCR, DVR-1, DVR-2, V.AUX, CD, TUNER • Video • Play (iPod) · Video Select • Playback Mode (iPod) · Video Convert • Assign (Excluding CD and TUNER) · HDMI · i/p Scaler · Digital · Resolution · Component · Progressive Mode · Analog (CD only) (Excluding CD and TUNER) · iPod dock · Aspect (Excluding CD and TUNER) • Input Mode • Rename • Source Level • Input Att.
1 Auto Setup Connect the included calibrated setup microphone to the SETUP MIC jack on the main unit. The “Auto Setup” screen appears automatically. Auto Setup Getting Started Preparations Optimize settings for speakers in use. F Menu tree F a Auto Setup Sound receptor s Option d Parameter Check a Auto Setup Playback 2 Place the microphone at ear height on a tripod or stand with the microphone pointing directly up towards the ceiling. Setup The settings are performed automatically.
Getting Started Start Pre-out Assign Connections Start Auto Setup. The Audyssey MultEQ XT Auto Setup process automatically calculates the size, level, distance, bass management crossover frequency, and optimal settings for each speaker and subwoofer. Audyssey MultEQ XT corrects acoustical distortions within the listening area. Before starting, connect and position all your speakers. Once started, MultEQ XT will play a series of test tones through each speaker.
s Option If the auto setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the auto setup procedure over again. Select settings for room EQ, mic, etc. Getting Started Error Messages Room EQ No microphone or speaker Cause • Included setup microphone is not connected.
Getting Started Subwoofer s Subwoofer Setup Select subwoofer use. [Selectable items] Manual Setup Connections Make detailed settings for various parameters No Surround A Configuration Select surround speakers A use and size. Select number of subwoofers and configuration. [Selectable items] Large [Selectable items] Small None Use this procedure to set the speakers manually or if you wish to change the settings made with the auto setup procedure.
f Channel Level Set distance from listening position to speakers. Before making the settings, measure the distance from the listening position to the different speakers. Adjust channel levels to obtain equal volume from all speakers. Mode [Selectable items] Auto Step Surround Select step. (smallest distance) Select surround speaker from which test tone is output. [Selectable items] [Selectable items] 0.1m 1ft 0.01m : Can be selected when “Meters” is set. 0.
Getting Started Connections Setup Playback • Please set all THX Certified speakers, set the “Speaker Configuration” for all speakers to “Small”. We recommend using with the crossover frequency set to “FIXED–THX–”, but depending on the speaker, setting it to a different frequency may improve frequency response near the crossover frequency.
Make settings for HDMI video/audio output. f Audio h HDMI Control Select HDMI audio output device. Make settings for HDMI control function. [Selectable items] Amp F Menu tree F Getting Started HDMI Setup Control TV HDMI Setup GUI menu “HDMI Control”- “Control” is “ON”, the “Amp” and “TV” will switch with the operation of any television not related to this setting. a Color Space s RGB Range Playback Make settings for HDMI monitor output.
Getting Started Surround Speaker Audio Setup s 2ch Direct/Stereo Select the surround speakers to use. Make settings for audio playback. [Selectable items] A B Make speaker settings for 2-channel mode playback. A+B Setting F Menu tree F Connections Manual Setup • This can be set when “Mode” is set to “Analog”. • This can be set when GUI menu “Speaker Setup” – “Speaker Configuration” – “Surround A” and “Surround B” are used (vpage 28). Audio Setup a EXT.
g Manual EQ Set dynamic range for downmix playback of Dolby Digital sources. Adjust tonal quality for each speaker using graphic equalizer. [Selectable items] ON OFF Getting Started d Downmix Option Adjust CH [Selectable items] Each [Selectable items] ON OFF 500Hz 1kHz 2kHz 4kHz 8kHz 16kHz [Variable range] –20dB ~ 0dB ~ +6dB Curve Copy Copy the Room EQ’s “Audyssey Flat” correction curve.
Getting Started Network Setup Make network settings. F Menu tree F Connections Manual Setup a Network Setup Make settings for wired or wireless LAN. Wired LAN settings Make settings for wired LAN. Network Setup Turn on the AVP-A1HD’s power. a Network Setup s Other If a Ethernet cable is connected Setup d Network Information The mode automatically switches to “Wired”.
Getting Started Wireless LAN settings Make settings for wireless LAN. Turn on the AVP-A1HD’s power. Connection Connections If no Ethernet cable is connected The mode automatically switches to “Wireless”. Display GUI menu “Manual Setup” – “Network Setup” – “Network Setup”. To enter the IP address manually Setup To acquire the IP address automatically using the DHCP function Playback Access point settings To set manually Search If searching is not possible q Input the SSID.
Getting Started s Other Make setting for amp power save mode and computer language environment. Lch Level Zone Setup Make settings for audio playback in a multi-zone system. –12dB ~ 0dB ~ +12dB Connections Manual Setup Make setting for power saving when not connected to network. ON [Selectable items] The “Lch Level“ and “Rch Level“ can be set when “Channel“ is set to “Stereo“. Zone Setup a ZONE2 OFF Setup To use the web control function, set this setting to “OFF”.
d OSD Make a setting for maximum volume. [Selectable items] OFF Set ZONE2 monitor as onscreen display Zone. –20dB –10dB : Display only ZONE2 operations. ZONE2/ZONE3 : Display ZONE2 and ZONE3 operations. Power On Level – – –dB –70dB ~ 18dB On-screen display appears only on the ZONE2 monitor.It does not appear on the ZONE3 monitor. Manual Setup Option Setup a Pre-out Assign s XLR Out Polarity d POA Setting Setup Define the volume setting that is active when the power is turned on.
Getting Started a Pre-out Assign s XLR Out Polarity Change the pre-out assignment. Set to switch the XLR pre-out terminal polarity. Setting “Free Assign” allows you to freely assign each pre-out to any channel, depending on the environment used.
Mute Level Set POA-A1HD for which the MODE select switch is set to “1” or “2”. This sets the amount of attenuation of the volume when the mute mode is set in the MAIN ZONE. [Selectable items] See the POA-A1HD operating instructions. Operating from the main unit Full –40dB –20dB Select the setup channel. [Selectable items] R1 L2 R2 L4 R4 L5 R5 L3 R3 L5/R5 R1/R2 R3/R4 BRIDGE (BTL) LINK Check h GUI [Selectable items] ON Volume Limit Wall Paper Make a setting for maximum volume.
Getting Started Setting with Respect to the Monitor k Trigger Out 1 Connections Select the conditions to turn on the trigger out 1 with respect to the zone, input source, surround mode, HDMI monitor, etc. For details about the trigger out function, see page 22. When the HDMI monitor set to on is selected, the trigger out turns on.
S0 Add New Feature This sets the function for maintenance by a DENON serviceperson or installer. (For professional use only.) Display the new functions which can be purchased for downloading to the AVP-A1HD and upgrade. This function allows a DENON serviceperson or installer to check the AVP-A1HD’s status and make settings via the Internet. When you purchase a new function and register your user information, “Registerd” is displayed on this menu and you can proceed with the upgrade.
Getting Started Operating from the main unit or main remote control unit Language Select the language displayed on the GUI screen. Source Select F Menu tree F Connections Manual Setup Use this procedure to select the input source and make the settings related to playing input sources. Language [Selectable items] Setup English Deutsch Nederlands Français Italiano Español Svenska Input Source Selection GOperation on the main unitH Turn the SOURCE SELECT knob.
F Menu tree F Source Select a Play d Assign The playback screen is displayed. Assign input sources to input connectors. [Input source] NET/USB ( iPod ) HDMI s Playback Mode (iPod)z s Playback Mode (iPod) d Assign Make settings for iPod playback. g Input Mode j Source Level [Input source] l Playback Mode A0 Still Picture HDP TUNER TV/CBL SAT VCR [Selectable items] All One g Input Mode Make settings for shuffle mode. h Rename [Input source] g Input Mode TUNER 3 4 DVR-2 5 V.
Getting Started Digital Analog Select digital input connector to assign to this source. Select the analog connector using the CD input. [Input source] [Input source] CD [Selectable items] RCA DVD HDP VCR DVR-1 DVR-2 V.AUX Press the VIDEO SELECT button, then turn the SOURCE SELECT knob until the desired picture appears. b To cancel, press the main unit’s VIDEO SELECT button, then turn the main unit’s SOURCE SELECT knob and select “SOURCE”.
Set resolution for video signal output to HDMI. [Selectable items] Auto 480p/576p 1080i 720p 1080p 480p / 576p 1080p Make input mode and decode mode settings for this source. The selectable input modes depend on the input source and “Assign” setting (vpage 43, 44). 720p Set the input mode for this source. PHONO [Input source] [Selectable items] Auto Video1 Video2 TUNER TV/CBL SAT EXT. IN DVR-1 DVR-2 V.AUX CD Normal This can be set when “i/p Scaler” is set to anything other than “OFF”.
Getting Started Input signal l Playback Mode Make settings for “NET/USB” playback. Dolby Digital Source Surround Mode [Input source] NET/USB Connections USB Select HOME THX CINEMA Select USB port to use. [Selectable items] Front THX surround sound mode to recreate the authentic sound of movie soundtracks. Rear Setup Playback Match the port to be used and the setting.
This is the standard mode for enjoying surround sound according to the program source. Surround Playback of 2-channel Sources [Selectable items] STANDARD : This mode is for decoding the input signals according to their format and playing surround sound. The display when the STANDARD mode is selected depends on the input signal and surround back output playback mode. Input signal [Selectable items] DOLBY PLgx DTS NEO:6 [Selectable items] DTS NEO:6 Cinema : This mode is suited for movie sources.
Getting Started Connections • Press the DSP SIMULATION button on the main unit or SIMU button on the main remote control unit to switch the surround mode. The mode switches each time the button is pressed. • Depending on the program source being played, it may not be possible to achieve a satisfactory surround effect. In this case, try other modes to achieve a sound field suited to your tastes. For details, see page 85.
[Selectable items] Surround Back ON Surround Back OFF THX Games Mode DRC Dimension Compress dynamic range (difference between loud and soft sounds). Shift sound image center to front or rear, to adjust playback balance. [Selectable items] Auto [Variable range] Low Middle High OFF n In the THX mode (for Multi-channel sources) THX Music Mode Surround Back OFF This can be set in the Dolby TrueHD mode. Assign center channel signal to front left and right channels for wider sound. D.
Getting Started Connections AFDM Input Channel Bass Auto-select surround mode by source. This function only works for software containing a special identification signal. If the software being played is recorded in Dolby Digital EX or DTS-ES, it is played in 6.1-channels. If not, it is played in 5.1-channels. Select channel using external input connectors (EXT. IN) for source being played. Adjust bass for all channels together.
Adjust each subwoofer channel tone. [Selectable items] Bass –6dB ~ +6dB [Variable range] OFF Audyssey Byp. L/R : Optimize frequency response of speakers except front L and R speakers. : Optimize frequency response of all speakers to flat response. Manual : Apply frequency response set with “Manual EQ” (vpage 33). : Turn equalizer off. Operating from the main unit or main remote control unit OFF OFF Audyssey Audyssey Manual Manual When “Audyssey” is selected, “ Audyssey Byp. Byp.
Getting Started j Audio Delay s Brightness Compensate for mismatched timing between video and audio. Adjust picture brightness. Delay audio. This sets the delay time for audio signals. Connections [Variable range] [Variable range] 0 ~ Information +12 ~ 200 ms 0 ms d Chroma Level Setup Operating from the main unit or the main remote control unit b The GUI menu is not displayed when carrying out this setting. Playback q Press the AUDIO DELAY button on the main unit or A.
HDMI Information Quick Select Shows information about audio input signals. Shows information about HDMI input/output signals and monitor. Shows information about “Quick Select” settings. F Menu tree F F Menu tree F F Menu tree F Information Quick Select 2 d Monitor2 Setup Quick Select 3 : The input signal type is displayed. : The input displayed. signal’s sampling frequency is : The dialogue normalization correction value is displayed.
Getting Started SOURCE SELECT MASTER VOLUME Turning Off the Sound Temporarily (Muting) Playback Connections Preparations Turning the Power On Setup 1 Playback ENTER uio p [ AMP] Remote Control [ iPod] ( Multi-Zone [POWER ON] [POWER OFF] Information MASTER VOLUME [POWER OFF] ENTER uiop Turning the Power Off Troubleshooting (AMP mode) [REPEAT] [RANDOM] (Sub remote control unit) About the button names in these explanations < > : Buttons on the main unit [ ]
The music on an iPod can be played by using the Control Dock for iPod (ASD-1R, sold separately). The operation can also be performed using the buttons on the main unit or remote control unit while watching the GUI menus. q Set the iPod in the DENON Control Dock for iPod. (vSee the Control Dock for iPod’s operating instructions.) w Assign the Control Dock for iPod’s input.
Getting Started uio p ENTER Viewing Still Pictures or Videos on the iPod Photo and video data on the iPod can be viewed on the monitor. (Only for iPod equipped with slideshow or video functions.) Connections 1 2 3 Press and hold [SEARCH] to set the Remote mode. “Remote iPod” is displayed on the AVP-A1HD’s display. Setup Watching the iPod’s screen, use ui to select “Photos” or “Videos”. Playback Press ENTER until the image you want to view is displayed.
GSlide show functionH Still picture (JPEG) files stored on USB memory devices can be played as slide shows. The time for which each picture is displayed can be set. When still picture (JPEG) files are played on the AVP-A1HD, they are played in the direction in which they are stored in the folder, so store in them in the direction in which you want them to play.
Getting Started ENTER uio p To pause Basic Operation 1 Make the necessary preparations. Connections q Check the network environment, then turn on the AVP-A1HD’s power. (vpage 20 “Network Audio”) w If settings are required, make the network settings. (vpage 34 ~ 36 “Network Setup”) e Prepare the computer. (vComputer’s operating instructions) Install “Windows Media Player ver. 11”.
The station list is displayed. Playback starts once buffering reaches “100%”. Preset Internet radio stations can be selected directly. Favorites are listed at the top of the menu screen, so when a station is registered as a favorite it can be tuned in easily. 1 2 3 While the Internet radio station you want to preset is playing, press [MEMO]. Use ui to select “Preset”, then press ENTER. Press [A ~ G], then press [1 ~ 8] to select the desired preset number. The Internet radio station is now preset.
Getting Started Playing Files Stored on a Computer Use this procedure to play music files, image files or playlists. Connections 1 2 Setup 3 4 uio p ENTER Playback Remote Control [ NET/DTU] ( Use ui to select “Media Server”, then press ENTER or p. Use ui to select the host name of the computer on which the music file you want to play is located, then press ENTER or p. Use ui to select the search item or folder, then press ENTER or p. Use ui to select the file, then press ENTER or p.
Operating the AVP-A1HD Using a Browser (Web control) Getting Started NOTE This function lets you operate the AVP-A1HD using Internet Explorer. 1 Check the AVP-A1HD’s IP address. 2 Input the AVP-A1HD’s IP address in Internet Explorer. Connections : “Manual Setup” – “Network Setup” – “Network Information” (vpage 36) Setup Playback • The AVP-A1HD is equipped with two USB ports, one each on the front and rear panels.
Getting Started SOURCE SELECT Surround mode INPUT MODE Other Operations and Functions Connections Other Operations Setup Playing Super Audio CD Playback 1 REC SELECT> Remote Control [ Either turn or press [SOURCE to select the input source assigned in step 1.
Convenient Functions HDMI Control Function Setup Dolby Headphone recording )%.* 065 Television compatible with HDMI control function "6%*0 "6%*0 065 3 L R L R 015*$"065 )%.* */ Select the parameters and set the desired mode. Start recording. Refer to the “Dolby Headphone” (vpage 47).
Getting Started Operations QUICK SELECT Connections Setup Playback CH SELECT uio p Remote Control Multi-Zone QUICK SELECT Information uio p Troubleshooting CH SELECT About the button names in these explanations < > : Buttons on the main unit [ ] : Buttons on the remote control unit Button name only: Buttons on the main unit and remote control unit 64 1 2 3 Connect the HDMI to the AVP-A1HD with equipment compatible with the HDMI control function.
Channel Level Quick Select Function Last Function Memory You can adjust the channel level either according to the playback sources or to suit your taste, as described below. With this function, the currently playing input source, input mode, surround mode, room EQ settings and volume can be stored in the memory. This stores the settings as they were directly before the standby mode was set.
Getting Started Operating DENON Audio Components Remote Control Unit Operations 1 Connections Main Remote Control Unit Setup Playback • On the main remote control unit, the display switches according to the device being operated and the mode. • In modes other than iPod, the mode switches between“ ” and “ ” each time the [MODE SELECTOR] is pressed.
Getting Started Functions of Buttons by Component EL Display EL Display Device operated 1 8 9 6 7 DVD (Default setting) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) CD Recorder VCR TAPE iPod Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) CD (Default setting) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse/ fast-forward) Playback Auto search (cue) Manual search (fast-reverse
Getting Started EL Display EL Display [MODE SELECTOR] Connections Setup [MENU] Playback [SETUP] MODE SELECTOR [1], [8 9], [6 7], [3], [2], [SOURCE ON], [SOURCE OFF] [ENTER] [uiop] [DISPLAY] Remote Control [CH +/–] [0 ~ 9, +10] [TV/VCR] Multi-Zone Buttons Information [MODE SELECTOR] Device operated 1 8 9 6 7 3 2 SOURCE ON SOURCE OFF TV (HITACHI) TV (SONY) SAT SAT Punch through Punch through Punch through Punch through Power on Power off Power on Power off Power on Power off MENU u
[ NET/DTU] NET/DTU AMP (MAIN) [MODE SELECTOR] iPod (Net Audio) Remote ID [ iPod] 5 1 (Default) 81001 72815 62865 2 82001 72816 62837 3 83001 72817 62838 4 84001 72818 62839 Point the main remote control units directly at each other and press and hold the button on the other device’s remote control unit that you want to learn. Once learning is completed normally, the display lights and the signal transmission indicator flashes twice.
System Call Function Getting Started Signal transmission indicator [ AMP] Connections [MODE SELECTOR] [SYSTEM CALL] This function lets you register a series of operations at a single button. For example, the amplifier can be turned on, the input source selected, the monitor’s power turned on, the source device’s power turned on and the play mode set all by pressing a single button. Up to 32 signals each can be registered at [SYSTEM CALL] (1, 2 or 3).
The signal transmission indicator flashes twice. Press [9], [7] and [3], in that order. The signal transmission indicator flashes twice and the backlight on time setting mode is set. Set the light on time. The signal transmission indicator flashes twice. GResetting button by buttonH 1 2 3 4 Press [MODE SELECTOR] for the device you want to reset. Press and hold in [RC SETUP] for at least 3 seconds. The signal transmission indicator flashes twice. Press [9], [7] and [6], in that order.
Getting Started Sub Remote Control Unit Operations Connections Setup Playback • The sub remote control unit is equipped with frequently used buttons, so it can be used for simple remote control unit operations. • The sub remote control unit can also be used for multi-zone, so you can use it to control the AVP-A1HD from other rooms. • The operations listed below can be performed with the sub remote control unit.
– – – – – File operations – – – – – – – – – – Stop Play/pause 1-track/all-track repeat play (USB / Media server) Random play (USB / Media server) b3 Stop Play/pause 1-track/all-track repeat play Song/album shuffle play b3 – – – – – b4 b4 – b5 b5 – Information Track search Multi-Zone Track search Remote Control – Z4 Playback Page forward screen / Character search iPod Z2 Z3 Zone operation mode selection Power turned off (b1) Power turned on (b1) Input source selection – Adjustment of vo
Getting Started Multi-zone indicator Connections [ZONE OFF] [ZONE SELECT] [ADVANCED SETUP] Setting the Zone for Which the Sub Remote Control Unit is Used (ZONE SELECT LOCK Mode) We recommend always using the sub remote control unit for the same room. When this is done, the unit can be set so that the zone does not switch when buttons are operated.
Getting Started Multi-Zone Connections and Operations Connections Multi-Zone Connections Audio signals Connectors for video output ZONE2 PRE OUT Stereo Bit-stream ZONE3 ZONE3 PRE OUT Stereo ZONE3 VIDEO OUT ZONE4 ZONE4 OPTICAL4 OUT Bit-stream – Remote Control ZONE2 OPTICAL OUT ZONE2 VIDEO OUT, ZONE2 S-VIDEO OUT, ZONE2 COMPONENT VIDEO OUT ZONE2 Playback Connectors for audio output Setup • For ZONE2, it is necessary to set in sequence with the signal connected to either the power amplifi
Getting Started SOURCE SELECT VOLUME Multi-Zone Operations Turning the Power On and Off GOperation on the main unitH Connections Press , or for the zone to be operated. When the power turns on, the multi-zone indicator lights on the display. GOperation on the remote control unitH Setup In the zone mode you want to operate, press [ON] or [OFF].
'- Other Information $ 4- DI '3 43 DI Surround back speakers $ '3 Number of surround back speakers 43 DI Movement of acoustic image from SR to SL With THX Surround EX, the surround back channel consists of one channel of playback signals, but we recommend using two speakers. The modes that use the new ASA technology from THX (vpage 80) are most effective when using two monopole type surround back speakers placed close together.
Getting Started Connections w Setting for primarily watching movies using diffusion type speakers for the surround speakers For the greatest sense of surround sound envelopment, diffuse radiation speakers such as bipolar (THX) types, or dipolar types, provide a wider dispersion than is possible to obtain from a direct radiating speaker (monopolar). Place these speakers at either side of the prime listening position, mounted above ear level.
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories. DTS-ES™ Discrete 6.1 DTS-ES™ Discrete 6.1 is a 6.1-channel discrete digital audio format adding a surround back (SB) channel to the DTS digital surround sound. Decoding of conventional 5.1-channel audio signals is also possible according to the decoder. DTS-ES™ Matrix 6.1 DTS-ES™ Matrix 6.1 is a 6.
Getting Started Connections Setup Playback Timbre Matching™ THX Ultra2 Cinema Boundary Gain Compensation The human ear changes our perception of a sound depending on the direction from which the sound is coming. In a movie theater, there is an array of surround speakers so that the surround information is all around you. In a home theater, only two speakers located to the side of your head are used.
Audyssey MultEQ® XT 81 Troubleshooting For more information, visit www.audyssey.com. Information Manufactured under license from Audyssey Laboratories. U.S. and foreign patents pending. Audyssey MultEQ® XT is a registered trademark of Audyssey Laboratories. Dynamic EQ™ is a trademark of Audyssey Laboratories.
Getting Started HDMI (High-Definition Multimedia Interface) Connections Setup HDMI is a digital interface standard for next generation TVs based on DVI (Digital Visual Interface) standards and optimized for use in consumer equipment. Non-compressed digital video and multi-channel audio signals are transmitted with a single connection.
Surround Mode Mode Decoder Room Size Effect Level Delay Time Subwoofer PRO LOGIC g/gx MUSIC mode only EXT. IN only Center Width Center Image Subwoofer Att.
Getting Started Differences in Surround Mode Names Depending on the Input Signals Input signals Button Surround mode Note Connections WMA (Windows LINEAR Media Audio) ANALOG PCM / / MP3 / WAV MPEG-4 AAC / FLAC DTS DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DOLBY DIGITAL DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With no (5.
Surround mode Note DTS DOLBY DIGITAL DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DOLBY DIGITAL EX (With Flag) DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With no (5.
Input signals Getting Started Button Surround mode Note LINEAR ANALOG PCM / WAV Connections WMA (Windows Media Audio) / MP3 / MPEG-4 AAC / FLAC DTS DOLBY DIGITAL DTS ES DSCRT (With Flag) DTS ES MTRX (With Flag) DTS (5.1ch) DTS 96/24 DVD-AUDIO DOLBY DOLBY DOLBY DOLBY DOLBY DVDDIGITAL EX DIGITAL EX DIGITAL DIGITAL DIGITAL Audio (With Flag) (With no Flag) (5.
Windows Media Player Ver.11 Wi-Fi® IEEE 802.11b This is one wireless LAN standard set by the 802 working group that establishes LAN technology standards at the IEEE (Institute of Electrical and Electronics Engineers) of the United States. It uses the 2.4 GHz band usable freely without a radio frequency license (ISM band), enabling communications at a maximum speed of 11 Mbps. “Infrastructure Communications” refers to networks using wireless LAN access points.
Getting Started WPA (Wi-Fi Protected Access) This is a security standard established by the Wi-Fi Alliance. In addition to the conventional SSID (network name) and WEP key (network key), it also uses a user identification function and encrypting protocol for stronger security. Connections WPA2 (Wi-Fi Protected Access 2) This is a new version of the WPA established by the Wi-Fi Alliance, compatible with more secure AES encryption.
n MAIN ZONE Video Convert b b b b b b b b b b b Monitor output COMPONENT S-VIDEO VIDEO VIDEOz1 S-VIDEOz1 S-VIDEOz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 COMPONENT COMPONENTz1 COMPONENTz1 VIDEOz1 z5 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEOz1 z5 A COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 VIDEOz1 z5 S-VIDEOz1 S-VIDEOz1 A A COMPONENTz1 VIDEO z1 z5 VIDEO COMPONENTz1 S-VIDEOz1 S-VIDEO COMPONENTz1 S-VIDEOz1 S-VIDE
Getting Started Video Convert Connections Setup OFF Input signal Monitor output (Normally) Monitor output (when GUI menu displayed) Playback Remote Control HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO HDMI COMPONENT S-VIDEO VIDEO A A A A A A A A S S S S A A A S A A A S (VIDEO) S S S S A A S A A A S (S-VIDEO) A S S S S A A S S A A S (S-VIDEO) S (VIDEO) S S S S A S A A A S (COMPONENT) A A S S S S A S A S A S (COM
Monitor output S-VIDEO VIDEO COMPONENT S-VIDEO VIDEO OFF – – – Used Not used – – – Used Not used A A A A A S S S S S A A S S S A A S S S A S A S S A S A S S A A A A A S (COMPONENT) S (COMPONENT)z1 S (COMPONENT)z2 S (COMPONENT)z2 S (COMPONENT)z1 A A S (S-VIDEO) S (S-VIDEO) – A S (VIDEO) A S (VIDEO)*2 S (VIDEO) A A S (S-VIDEO) S (S-VIDEO) – A S (VIDEO) A S (VIDEO)*2 S (VIDEO) Output present No output With On-screen display, the VIDEO signal is superimposed output.
Getting Started Symptom Power turns off suddenly and power indicator flashes red. Troubleshooting Connections Setup If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction.
Symptom No sound is produced from center speaker. 46 ~ 48 – • Adjust the subwoofer’s volume to an appropriate level. • Set to the “STANDARD” (Dolby/ DTS Surround) or “HOME THX CINEMA” mode. – 46, 47 No picture appears with HDMI connections. – 45 • The connections between the AVP-A1HD and monitor are faulty. • The monitor’s input setting is wrong. • PURE DIRECT mode is set.
Getting Started GiPodH Symptom iPod cannot be played. Cause Countermeasure Connections • The input source assigned to • Switch to the input source “iPod dock” is not selected. assigned at “iPod dock”. • Cable is not properly connected. • Reconnect. • Control Dock for iPod’s AC • Plug the Control Dock for iPod’s adapter is not connected to AC adapter into a power outlet. power outlet.
Symptom Cannot connect to network. Page 34, 35 – • Analog Input sensitivity / Input impedance: RCA Pre output (unbalanced) : 200 mV / 47 kΩ/kohms XLR Pre output (balanced) : 400 mV / 100 kΩ/kohms 10 Hz ~ 100 kHz +1, –3 dB (DIRECT mode) Frequency response: 102 dB (IHF–A weighted, DIRECT mode) S/N: 0.005 % (20 Hz ~ 20 kHz) (DIRECT mode) Distortion: Rated output: RCA Pre output (unbalanced) : 1.2 V XLR Pre output (balanced) : 2.
Getting Started n Wireless LAN Connections Setup Network type (wireless LAN standards) : Conforming to IEEE 802.11b Conforming to IEEE 802.11g (Conforming to Wi-Fi®)z Transfer rate: DS-SS: 11 / 5.
List of preset codes / Liste von voreingestellten Codes / Liste de codes préréglés / Lista dei codici pre-regolati / Lista de códigos pre-ajustados / Lijst van vooringestelde codes / Förteckning över förinställda koder G Denon Amp D Denon 81001, 82001, 83001, 84001 Denon Tuner D Denon (Analog) 52863, 52795, 52800, 52805 Denon Digital Tuner D Denon (NET) 62865, 62837, 62838, 62839 I J Denon iPod D Denon 72815, 72816, 72817, 72818 Cable A B C D E F A-Mark ABC Accuphase Acorn Action Active AD
U V W Tascam Teac Technics Techwood Thomson Thorens Thule Audio Tokai Universum Victor Wadia Wards Y Yamaha Yorx 40393, 40420 40490, 40393, 40420 40029, 40303 40303 40053 40157 40157 40420 40157, 40053 40072 40393 40000, 40032, 40157, 40053, 40087, 40179 40490, 40868, 40032, 40036 40000 CD Recorder D J R S T Denon JVC RCA Sony Teac Thomson C D F G H I J K L M O Aiwa Akai Arcam Audiolab Carver Denon Fisher Garrard Genexxa GoldStar Grundig Harman/Kardon Inkel JVC Kenwood LG Luxman Magnavox Marant
F G H Eurocrypt EuroLine Europa Europhon Eurosky Eurostar Eutelsat Expressvu Fenner Ferguson Finlandia Finlux Flair Mate FMD Force Fortec Star 00455 01251 00863 00299 00262, 00299 00818 00713 00775, 01775 00713 00455, 01291, 01743 00455 00455 00713 01251, 01413, 01457 01101 01083 00455, 00497, 00795, 00879, Foxtel 01162, 01176, 01356 Fracapro Planet 00871 Fracarro 00125, 00871 France Telecom 00871 Freesat 00882 FTE 00863 FTEmaximal 00713, 00863 00173, 00262, 00299, 00394, Fuba 01214, 01251, 01801 Fugion
Satstation Schaub Lorenz Schneider 01083 01214 00710, 01206, 01251 00394, 00504, 00863, 01075, Schwaiger 01083, 01111, 01317, 01334, 01412, 01457 SCS 00299 Sedea Electronique 00125, 01206, 01283, 01626 SEG 01075, 01087, 01251, 01626 Seleco 00871 Septimo 01375 Serd 01412 Serino 00610 Servimat 01611 ServiSat 00713, 01251 Sharp 01517 Siemens 00173, 01334, 01429 Silva 00299 Skantin 00713 SKR 00713 00856, 00099, 00847, 00887, SKY 01014, 01175, 01662, 01693, 01847, 01848, 01850 SKY Italia 00853, 01693, 01847, 01
Akashi Akiba Akira Akito Akura Alaron Alba Albatron Alfide All-Tel Alleron Allorgan Allstar Ambassador America Action American High Amplivision Amstrad Amtron Anam Anam National Andersson Anglo Anhua Anitech Ansonic AOC Aolinpike Apex Digital AR Arc En Ciel Arcam Ardem Aristocrat Aristona ART Arthur Martin ASA Asberg Asora Astra Asuka ATD Atlantic 10009, 10860 10037, 10218, 10455 10418 10037 10171, 10009, 10037, 10163, 10218, 10264, 10668, 10714, 11037, 11498, 11556, 11982 10170 10009, 10036, 10037, 10073,
E F Easy Living Eaton Ecco ECE Edison-Minerva 11248 10060 10773 10037 10487 10037, 10217, 10218, 10362, Elbe 10610 Elcit 10163 Electroband 10000 Electrograph 11755 10154, 10000, 10463, 10150, Electrohome 10178, 10030, 10073 Elekta 10009, 10264 Elfunk 11037, 11208 ELG 10037 Elin 10009, 10037, 10361, 10548 Elite 10037, 10218 Elta 10009, 10264 Emerald 10178 10047, 10017, 10154, 10451, 10236, 10463, 10180, 10150, 10178, 10171, 11944, 11911, Emerson 11909, 10714, 10668, 10623, 10486, 10036, 10371, 10370, 1
JVC K Kaige Kaisui Kambrook Kamp Kangli Kangyi Kapsch Karcher Kathrein Kawa Kawasho KB Aristocrat KDS KEC Kendo Kennedy Kennex Kenwood Khind KIC Kiota Kioto Kiton KLH KLL Kloss Kneissel Kolin Kolster Kongque Konichi Konig Konka Kontakt Korpel Korting Kosmos Koyoda Kreisen KTV Kuaile Kulun Kunlun 10054, 10093, 10463, 10053, 10030, 10070, 10036, 10218, 10371, 10418, 10508, 10606, 10650, 10653, 10683, 10731, 11253, 11923 10009, 10264, 10817 10009, 10037, 10217, 10218, 10455 10217 10017, 10180, 10217 10001,
Panasonic Panavision Panda Pathe Cinema Pathe Marconi Pausa Paxonic PCE Penney Perdio Perfekt Petters Philco Philharmonic Philips Phocus Phoenix Phonola Pilot Pioneer Pionier Plantron Playsonic Polaroid Poppy Portland Powerpoint Prandoni-Prince Precision Premier President Prima Princeton Prinston Prinz Prism 10054, 10000, 10156, 10250, 10051, 10236, 10030, 11947, 11946, 11941, 11480, 11310, 11291, 11271, 10853, 10650, 10548, 10508, 10367, 10361, 10226, 10208, 10163, 10108, 10037, 10035 10037 10051, 1
Strong Studio Experience Stylandia Sunkai Sunstar Sunwatt Sunwood Superla Superscan Supersonic SuperTech Supra Supreme Susumu Sutron SV2000 SVA Svasa Swisstec Sydney Sylvania Symphonic Synco T Syntax Sysline T+A Tacico Tai Yi Taishan Tandberg Tandy Targa Tashiko Tatung TCL TCM Teac Tec Tech Line Techica Technica 11149, 11163 10843 10217 10218, 10455, 10487, 10610, 10865 10009, 10037, 10264, 10371 10455 10037 10217 10093, 10864, 11944 10009, 10208, 10455, 10805 10009, 10037, 10218, 10556 10178, 10009, 103
E F G H J K L M N P R S T U V Elfunk Ferguson Finlux Goodmans Hitachi JDV Jensen KLH Lenco Logik Luker Luxor Matsui Maxim Medion Mirror Naiko Narita Panasonic Philips Powerpoint Prima RCA Roadstar Saivod Samsung Schneider SEG Sova Stevison Sylvania Teac Technica Telefunken Thomson Transonic United Vestel 11037 11037 11556 10587, 11037, 11900 11960 11982 11933 11962 10587 11037 11982 11037 11037 11982 11900 11900 11982 11982 11941 11454, 10556, 11961 10698 11933 11948, 11958 11900 11982 11903 11982 11
S T Sharp Sylvania Symphonic Toshiba 11917 11944 11944 11945 b3 S Sharp 20807 Akai Emerson ESA Magnavox Panasonic RCA Sharp Superscan Sylvania Symphonic Toshiba 30899 30821 30821 30821 31362, 31462 31132 30630 30821 30821 30821 31045 b4 A E M P R S T B VCR A A-Mark ABS Admiral Adventura Aiko Aim Aiwa Akai Akura Alba Alienware Allegro Allorgan Allstar America Action American High Amoisonic Amstrad Anam Anam National Ansonic Aristona ASA Asha Astra Asuka 20037, 20240, 20000, 20278, 20046 21972
Luxor M LXI M Electronic Magnadyne Magnasonic Magnavox Magnin Magnum Manesth Marantz Mark Marta Mastec Master’s Matsui Matsushita Media Center PC Mediator Medion MEI Memorex Metronic Metz MGA MGN Technology Micormay Micromaxx Microsoft Midland Migros Mind Minolta Mitsubishi N 12 Motorola MTC MTX Multitec Multitech Murphy Myryad NAD Naiko NAP National 20048, 20047, 20104, 20043, 20046, 20106, 20315 20037, 20000, 20042, 20067 20037, 20240, 20000, 20038 20081 20037, 20240, 20000, 20278, 21278 20035, 2003
TNIX Tocom Tokai Topline Toshiba U Tosonic Totevision Touch Toyoda Tradex Triad Trix Uher Ultra Ultravox Unitech United Universum V W X Y Z Vector Vector Research Victor Video Concepts Video Technic Videomagic Videosonic Viewsonic Villain Voodoo Wards Watson Weltblick Wharfedale White Westinghouse World XR-1000 Yamaha Yamishi Yoko Zenith ZT Group ZX 20037 20240 20037, 20104, 20041 20348 20081, 20240, 20045, 20000, 20042, 20067, 20043, 20209, 20041, 20352, 20432, 20742, 20845, 21008, 21145, 21972, 219
F Entivo Enzer ESA EuroLine Fenner Ferguson Finlux Firstline G Fisher Funai Fusion Gateway GE General Electric Germatic Global Link Global Solutions Global Sphere Go Video GoldStar Goodmans GP Audio GPX Gradiente Graetz Gran Prix Grandin Greenhill Grundig Grunkel H H&B Haaz Haier Hanseatic Harman/Kardon HCM HDT HE Henss HiMAX Hitachi Hiteker Hoeher 14 30503, 30539 30784, 30770, 31228 30821, 31268 30675, 30788, 31115, 31233 30651 30651, 30695, 30713, 30884, 30898, 31695, 31730 30672, 30591, 30741, 307
Salora Sampo Samsung Sansui Sanyo Scan ScanMagic ScanSonic Schaub Lorenz Schneider Schwaiger Scientific Labs Scott Seeltech SEG Sensory Science Shanghai Sharp Sharper Image Sherwood Shinco Shinsonic Siemssen Sigmatek Siltex Silva Silva Schneider SilverCrest Simaudio Singer Sistemas Skantic Skymaster Skyworth Sliding Slim Art SM Electronic Smart Sonai Sonashi Sonic Blue Sony Sound Color Soundmaster 30741 30752, 31321, 31347 30490, 30573, 30744, 30199, 30820, 30899, 31044, 31075, 31635, 31932 30784, 30695, 3
DVD preset codes DVD-Voreinstellungscodes Codes préréglés DVD Codici di preselezione DVD Códigos de preajuste de DVD DVD-voorkeuzecodes Förinställda DVD-koder e Model No.
www.denon.com Denon Brand Company, D&M Holdings Inc.
