AV SURROUND RECEIVER AVR-1910 Owner’s Manual Manuel de l’Utilisateur b The illustrations used for explaining operations in this manual show the buttons of the remote control unit. The same operations can be performed using the buttons with the same names on the main unit panel. b Les illustrations des boutons présentes dans ce manuel servent à expliquer le fonctionnement de la télécommande. Vous pouvez contrôler l’appareil à l’aide du bouton portant le même nom sur la façade de l’appareil.
ENGLISH FRANCAIS n SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
FRANCAIS ENGLISH FCC INFORMATION (For US customers) n NOTE ON USE / OBSERVATIONS RELATIVES A L’UTILISATION 1. PRODUCT This product complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this product may not cause harmful interference, and (2) this product must accept any interference received, including interference that may cause undesired operation. 2.
ENGLISH n Contents Getting Started Flow of operations through playback··········································2 Accessories···················································································2 Cautions on Handling····································································3 Cautions on Installation································································3 About the Remote Control Unit···················································3 Inserting the Batteries·················
ENGLISH Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Connections Flow of operations through playback Getting Started Getting Started Perform the operations leading to playback on the AVR-1910 in the order shown below. Accessories Settings Connections Check that the following parts are supplied with the product.
ENGLISH Getting Started Cautions on Handling • Before turning the power switch on Check once again that all connections are correct and that there are no problems with the connection cables. Note: For proper heat dispersal, do not install this unit in a confined space, such as a bookcase or similar enclosure. Connections • Power is supplied to some of the circuitry even when the unit is set to the standby mode.
ENGLISH Getting Started Part Names and Functions Front Panel W6 W5 W4 W3 Button that function in the same way as remote control buttons W2 W1 o i For buttons not explained here, see the page indicated in parentheses ( ).
ENGLISH Getting Started Part Names and Functions Display Q5 Q4 Q3 Q2 Q1 Q0 o i u Connections Settings q w Playback q Decoder indicators The indicator for the currently operating decoder lights. Multi-Zone w Input audio signal indicators e Information display Remote Control The input source name, surround mode, setting values and other information are displayed here. r Front speaker indicator These light according to the settings of the front A and B speakers (vpage 42).
ENGLISH Rear Panel Q3 Q2 Q1 Q0 Connections Q6 Q5 Q4 Getting Started Part Names and Functions Settings Playback Multi-Zone Remote Control Information w e q HDMI connectors········································ (13) w Digital audio connectors···························· (14) r PRE OUT connector···································· (11) t y u i y REMOTE CONTROL jacks Connect a device that supports the remote control function.
ENGLISH Getting Started Part Names and Functions Remote Control Unit Front Rear Connections q w e Q6 r W0 Settings t Playback t Multi-Zone W1 W2 W3 W4 y Remote Control Q1 W5 Q7 Q2 Information u Q3 W7 Q8 i o Troubleshooting t Q0 W6 Q4 Q5 Q9 W8 q w e r t y u i o Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 Q8 Q9 W0 W1 W2 W3 W4 W5 Remote control signal transmitter Indicator······················································ (52) Power buttons············································ (17) QUICK S
ENGLISH n Connection Flow Connections for all compatible audio and video signal formats are described in this owner’s manual. Please select the types of connections suited for the equipment you are connecting. After connections are completed, certain settings must be made on the receiver. Make the settings indicated “ Set as necessary ” for the individual items.
ENGLISH Getting Started Important Information Converting Input video signals for Output (Video Conversion Function) How the on-screen display is displayed depending on the video input signal Connections Settings The AVR-1910 is equipped with four types of video input terminals (HDMI, Component video, S-Video and video) and three types of video output terminals (HDMI, Component video and video). Use the terminals according to the devices to be connected.
ENGLISH n When 7.1ch (Surround Back Speaker) Connected Front speakers 2 z1 z4 z5 Surround speakers Front speaker It is not possible to use the front height speakers and surround back speakers simultaneously.
ENGLISH Getting Started Installing/Setting the Speakers s Set the “Amp Assign” Mode According to the Speaker Layout. The signals output from the AVR-1910’s SURR. BACK/AMP ASSIGN speaker terminals can be switched to signals of the surround mode being used (vpage 25 “Amp Assign”). Connections Amp assign mode (vpage 25) SURR.
ENGLISH About bi-amp connections Carefully check the left (L) and right (R) channels and + (red) and – (black) polarities on the speakers being connected to the AVR-1910, and be sure to interconnect the channels and polarities correctly. These connections make for higher quality playback sound with no interference between the signals of the bass and treble units. When the amplifier assignment mode is set to “Front A Bi-Amp” or “Front B Bi-Amp”, connect as shown below.
ENGLISH Getting Started Connecting devices Connections The AVR-1910 allows connection of inputs from up to 4 HDMI devices and output to 1 TV. Connections DVD Player )%.* 065 Settings Playback Multi-Zone Blu-ray Disc Player )%.* 065 SAT/CABLE Tuner )%.* 065 Digital Video Recorder )%.
ENGLISH CD Player Control dock for iPod® Playback Components Use a DENON control dock for iPod (ASD-1R, ASD-11R, ASD-3N or ASD-3W sold separately) to connect the iPod to the AVR-1910. For instructions on the control dock for iPod settings, refer to the control dock for iPod’s operating instructions. Blu-ray Disc player / DVD player For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.
ENGLISH Getting Started Connecting Devices not Equipped with HDMI terminals Recording Components SAT/CABLE Tuner Select the terminal to use and connect the device. Connections Digital Video Recorder Video Cassette Recorder Select the terminal to use and connect the device. Select the terminal to use and connect the device. For instructions on HDMI connections, see “Connecting Devices Equipped with HDMI terminals” on page 12.
ENGLISH SIRIUS Connector Other Devices Video camera / Game console 7*%&0 7*%&0 065 Settings "6%*0 "6%*0 065 3 - SIRIUSConnect Home Tuner L R L Playback R Multi-Zone b When connecting digital audio Remote Control Component with Multi-channel Output connectors The video signal can be connected in the same way as a Blu-ray Disc player / DVD player (vpage 14).
ENGLISH Getting Started Connecting Devices not Equipped with HDMI terminals Antenna terminals 3 Direction of broadcasting station Connections FM antenna Return the lever. Turning the Power On NOTE 75 Ω/ohms Coaxial cable Settings AM loop antenna (supplied) FM indoor antenna (supplied) Once Connections are Completed • Do not connect two FM antennas simultaneously. • Even if an external AM antenna is used, do not disconnect the AM loop antenna.
ENGLISH Getting Started Settings With the AVR-1910, settings and operations for most functions can be performed by operating while looking at the menus displayed on the monitor screen. . MENU ⇩ Setting items Number Description Page 1-1 1-2 1-3 1-4 1-5 1-6 2-1 2-2 2-3 Surround Parameter Tone Control Audyssey Settings Manual EQ RESTORER Audio Delay Status Audio Input Signal HDMI Information Adjust surround sound parameters. Adjusts the treble and bass tone.
ENGLISH Getting Started Examples of On-screen Display and Front Display Below we describe typical examples of displays on the TV screen and on the set’s display window. On-screen Display Connections n Top menu display Front Display Description MENU w 1.Parameter q 2.Information 3.Auto Setup 4.Manual Setup 5.Input Setup Settings Playback e q : The menu items are displayed here. w : The selected line is displayed here.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) Step 1 : Connect the included Setup Microphone NOTE NOTE Connections • Do not disconnect the setup microphone until the Audyssey Auto Setup procedure is completed. • When using headphones, unplug the headphones before starting the Audyssey Auto Setup procedure. Step 2 : Audyssey Auto Setup Preparations around items indicate the settings made upon purchase.
ENGLISH Changing the amplifier assignment (Amp Assign) The signals output from the AVR-1910’s SURR. BACK/AMP ASSIGN speaker terminals can be switched to signals of the surround mode being used. Front from the speakers connected to the SURR. BACK/AMP ASSIGN terminals. Front B Bi-Amp : The sound of the front B bi-amp channel is output Front Height : The sound of the front height channel is output from the speakers connected to the SURR. BACK/AMP ASSIGN terminals.
ENGLISH Getting Started Making the Optimum Settings for the Connected Speakers Automatically (Audyssey Auto Setup) 8 Press NOTE . This returns you to analysis results items, so repeat step 7. Front Connections Settings i to select “Next”, then 9 Press press . ui to select 10 Press “Store”, then press . Playback Multi-Zone “Storing Please wait...” is displayed on the on-screen display while the results are being stored. When storing is complete, “Storing complete. Auto Setup is now finished.
ENGLISH Error Messages If the Audyssey Auto Setup procedure could not be completed due to speaker installation, the measuring environment, etc., an error message is displayed. If this happens, check the relevant items, be sure to take the necessary measures, then perform the Audyssey Auto Setup procedure over again. Be sure to turn the power off before checking the speaker connections.
ENGLISH Getting Started Making detailed settings (Manual Setup) Connections Use this procedure to change the Audyssey Auto Setup settings or to change the various audio, video and display settings. The set can be used without changing these settings. Make these settings as necessary. For a description of “Menu map” and operating instructions, see page 18. Making the speaker settings (Speaker Setup) Default settings are underlined.
ENGLISH Setting contents Setting items Speaker Config. Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 26 Specifications Remote control operation buttons NOTE Set the difference in the distance between the speakers to less than 6.0 meters (20 feet). “Relocate Speaker” is displayed on the screen if an inappropriate distance is set. Default : Reset all distance settings to factory default. • Yes : Reset to the defaults.
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting contents Setting items Channel Level Connections Set the volume of the test tone to be the same when it is output from each speaker. Settings Test Tone Start : Output test tones. FL (Front L)/ C (Center)/ FR (Front R)/ SR (Surround R)/ SBRz (Surround Back R)/ SBLz (Surround Back L)/ SL (Surround L)/ FHL (Front Height L)/ FHR (Front Height R)/ SW (Subwoofer) : Select the speaker. z When the “S.
ENGLISH Setting items Making the HDMI settings (HDMI Setup) Default settings are underlined. Setting items Setting contents ON : Compensated. OFF : Not compensated. Playback Amp : Use speakers connected to AVR-1910 for audio playback. TV : Use speakers of TV for audio playback.
ENGLISH Getting Started Making detailed settings (Manual Setup) Making the audio settings (Audio Setup) Default settings are underlined. Connections Make settings for audio playback. Settings Playback Setting items Setting contents EXT.IN SW Level Set the playback level of the analog subwoofer signals input from the external input terminals (EXT.IN). 2ch DIRECT/STEREO Make speaker settings for 2channel mode playback. +15dB : This is the recommended level.
ENGLISH Making the ZONE2 settings (ZONE2 Setup) Making other settings (Option Setup) Default settings are underlined. Setting items –12dB ~ +12dB (0dB) –12dB ~ +12dB (0dB) Information NOTE • The currently selected input source cannot be set. • Input sources set to “Delete” cannot be selected using .
ENGLISH Getting Started Making detailed settings (Manual Setup) Setting items Setting contents Setting items Connections On-Screen Display Tuner Information : This sets the time the on-screen display is displayed Make the settings related to when a tuner operation is performed. displays on the TV screen. • Always : Show display continuously. • 30sec : Show display for 30 seconds after operation. • 10sec : Show display for 10 seconds after operation. • OFF : Turn display off.
ENGLISH DVD HDP TV SAT/CBL VCR/iPod DVR 1 2 02 2 Input Mode Decode Mode [RTN]:Back Rename [RTN]:Back Source Level iPod Playback Mode 5-5.Source Level Analog Input Digital Input : DVD : Auto : Auto 5-6.iPod Playback Mode : : 0dB 0dB Repeat Mode Shuffle Mode : : One OFF Defaulut [ ]:Up/Down [ ]:Rename [RTN]:Back [RTN]:Back Auto Preset 5-1.Auto Preset Auto Tuning Preset Station Memory Storing Preset Memory [ENT]:Start [RTN]:Back 5-2.Preset Skip Block : A Block Presets: A1 FM 87.
ENGLISH Getting Started Making the input settings (Input Setup) Changing the Input Sources Assigned to the Input Terminals (Assign) Default settings are underlined. Connections Setting items Setting contents Settings Input Assign (HDMI) TV SAT/CBL VCR DVR V.AUX input HDMI : The DVD HDP Assign input sources to input sources are assigned to the HDMI input terminals as shown below. connectors.
ENGLISH Making the video settings (Video) Default settings are underlined. Changing the Input Source’s Input Mode and Decoding mode (Input Mode) Default settings are underlined. NOTE Setting items . to select “Source”. HDP TV SAT/CBL VCR Default setting Auto HDMI Digital Auto Analog Input source DVR V.AUX CD TUNER Default setting Auto Analog Analog Analog Auto HDMI EXT.
ENGLISH Getting Started Making the input settings (Input Setup) Setting items Decode Mode Set the input decoding mode. Setting contents Connections Auto : Detect type of digital input signal and decode and play source’s automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. Settings • This can be set for input sources for which “HDMI” or “Digital” is assigned at “Assign” (vpage 33). • Normally set this to “Auto”.
ENGLISH Assign Name to a Preset Memory (Preset Name) Presetting Radio Stations (Auto Preset) Default settings are underlined. Setting contents Setting items Auto Preset This can be set when the source is set to TUNER . Use the auto preset function Start : Start the auto preset process. to program radio stations. Setting contents Preset Name This can be set when the source is set to TUNER . Assign name to a preset 1. Use ui to select the preset channel name you want to change, memory. then press . 2.
ENGLISH Getting Started Making the input settings (Input Setup) Setting Radio Reception Restrictions (Parental Lock) Default settings are underlined. Connections Setting items Lock Setting Set the channel reception limits. Check the SIRIUS Radio Reception Sensitivity (Antenna Aiming) Default settings are underlined. Setting contents radio Settings This can be set when the source is set to SIRIUS . 1. Press . 2. Using uio p, input the password (4 digits number) and press . 3.
ENGLISH n Operation Flow Playing Components (vpage 38) ① Turn on the power of the TV, subwoofer and player. ② Set the TV’s input to the AVR-1910. Front ③ Load the disc in the player. 2 r Stereo Playback (vpage 44) . the component connected to 4 Play the AVR-1910. Turn on the AVR-1910’s power. (vpage 17 “Turning the Power On”) Press to select the input source assigned in step 1w above. Front 5 Use to adjust the volume. GVariable rangeH ––– –80.0dB ~ 18.
ENGLISH Getting Started Playing Components 4 Press and hold it down for a 2 seconds or more to select the display mode. Connections There are two modes for display the contents recorded on the iPod. Browse mode :Displayed on the TV screen. Settings Playback Multi-Zone Audio file S S Video file Sz1 Sz2 n Repeat playback and shuffle Remote control unit (AVR-1910) S S iPod® A S Remote Control video file to be played. Information Playback starts. to adjust the volume.
ENGLISH to select “FM” or “AM”. Rear Listening to Preset Stations Tune in the desired broadcast station. q To tune in automatically (Auto Tuning) Press to light the “AUTO” indicator on the display, then use w To tune in manually (Manual Tuning) Press to turn off the display’s “AUTO” indicator, then use Tune in the broadcast station you want to preset. Front n Default settings to select the preset number (1 to 8). again to complete the setting. • To preset other stations, repeat steps 1 to 5.
ENGLISH Getting Started Playing Components Searching Categories Front • The channel switches continuously when The strength of both the SIRIUS and terrestrial signals can be checked at menu “Antenna Aiming” (vpage 37). is pressed and held. Connections Settings Playback Multi-Zone Remote Control 1 Press 2 Press on the main unit until “SIGNAL” appears on the display.
ENGLISH Operations During Playback Selecting the Surround Mode Select a surround mode to enjoy surround playback with your favorite sound field effects. Turning Off the Sound Temporarily (Muting) Front . q Playing sources according to the sources’ audio signal format/number of channels (Standard Playback) Operations The sound from the speakers and pre-out connectors is automatically cut. Press mode. to select the surround Rear Cinema : This mode is suited for movie sources.
ENGLISH Getting Started Selecting the Surround Mode Displaying the currently playing surround mode n Surround playback of multichannel sources (Dolby Digital, DTS, etc.) Connections In the case of standard playback of multi channel sources, the AVR-1910 recognizes the format of the multi-channel audio input signal and automatically operates the appropriate decoder for surround sound.
ENGLISH Adjusting the Sound Field Effects (Parameter) r Stereo Playback 1 Front Press Rear to select the “STEREO”. NOTE Some of the setting items cannot be set while playback is stopped. Set these items during playback. Adjusting the sound field effects (Surround Parameter) Default settings are underlined. Setting items t Playing the Pure Direct mode 2 Press Rear .
ENGLISH Getting Started Adjusting the Sound Field Effect (Parameter) Setting items Center Image Setting contents Setting items Setting contents AFDM (Auto Flag Detect ON : Set. OFF : Do not set. Mode) 0.0 ~ 1.0 (0.3) Connections Assign center channel signal to front left and right channels for wider sound. Panorama Settings Playback Multi-Zone Remote Control Information Troubleshooting ON : Set. Assign front L/R signal also OFF : Do not set. to surround channels, for wider sound.
ENGLISH Setting items Setting contents Making the MultEQ, Dynamic EQ and Dynamic Volume settings (Audyssey Settings) Front Height Default settings are underlined. Subwoofer ATT ON : The input from the subwoofer channel is attenuated. Attenuate subwoofer level OFF : The input from the subwoofer channel is not attenuated. Usually use in this mode. when using EXT. IN mode. Setting contents Bass –6dB ~ +6dB (0dB) Adjusts the low frequencies. Treble –6dB ~ +6dB (0dB) Adjusts the frequencies.
ENGLISH Getting Started Adjusting the Sound Field Effect (Parameter) Setting items Setting contents Setting items Dynamic EQ Connections ON : Use Dynamic EQ function. Audyssey Dynamic EQ solves OFF : Do not use Dynamic EQ function. the problem of deteriorating • W hen set to “ON”, “ ” is displayed. sound quality as volume is • W hen “MultEQ” is set to “OFF” , “Dynamic EQ” is automatically set decreased by taking into to “OFF” account human perception • This can also be set by pressing .
ENGLISH Restoring compressed audio to nearly pre-compressed conditions for playback (RESTORER) Default settings are underlined. Mode 2 (RESTORER 96) Mode 3 (RESTORER HQ) Setting contents 0ms ~ 200ms Remote control operation buttons Displaying the menu : Cancel the menu : Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu 8 Specifications • If you wish to adjust the “Audio Delay” while playing HDMI or component video signals, press u to set “OSD” to “OFF”.
ENGLISH Getting Started Convenient functions HDMI Control Function Connections When you make an HDMI connection with a TV or player compatible with AVR-1910 and HDMI control functions, you can perform the following operations by setting the HDMI control function of each device. Settings n AVR-1910 power off can be linked to the TV power off step Playback z When you set “Output audio from amp” in the TV audio output setup operation, you can switch the amp power on.
ENGLISH Saving frequently used settings (Quick Select Function) You can adjust the channel level either according to the playback sources or to suit your taste, as described below. 1 Press . Channel Volume 0.0dB 0.0dB 0.0dB 0.0dB SR SBR SBL SL 0.0dB 0.0dB 0.0dB 0.0dB ]:CH Sel. Front Press o p to adjust the volume. b In the case of a subwoofer, reducing the volume when it is at “–12 dB” will change the setting to “OFF” (none).
ENGLISH Getting Started Playing 2-Channel Sound in ZONE2 (multizone function) Connections 2-channel sound can be played in rooms other than the MAIN ZONE where multichannel sound is played. There are two methods to do this, as described below. Choose one of the methods.
ENGLISH Registering Preset Codes Operating Registered Devices 1 MAIN/TV : To register a TV DEVICE : To operate a Blu-ray disc player, DVD player, to the component to be registered.
ENGLISH Getting Started Operating Registered Devices TV Blu-ray Disc / DVD Player Front Connections Settings Playback 6 7 Multi-Zone CH + – TV INPUT VOLUME df Remote Control Front MUTE MENU uio p ENTER SETUP RETURN DEVICE SELECT Power on / Standby Playz Pausez Stopz Manual search z POWER OFF ON/SOURCE 1 2 SHIFT, 3 (fast-reverse / fast-forward) Channelz SKIP + Switching the input d : TV Volume (+) f : TV Volume (–) TV MUTE Calling out the menus Cursor operation Enter setting Setup Return 6 7
ENGLISH Satellite receiver/Cable TV CD Player Front Front Rear 0 ~ 9, +10 Special Remarks Front ABC (009) q 0 ~ 9, +10 Number input / Track selection Default setting (Preset code) DENON (111) Special Remarks q : Assigning satellite receiver or cable TV buttons to operate other devices 2 Switch .
ENGLISH Getting Started Other Information Surround Settings Dolby Digital Dolby Pro Logic gx DTS Digital Surround Dolby Digital is a multichannel digital signal format developed by Dolby Laboratories. A total of 5.1-channels are played: 3 front channels (“FL” , “FR” and “C”), 2 surround channels (“SL” and “SR”) and the “LFE” channel for low frequencies.
ENGLISH Audyssey Dynamic Volume™ DTS 96/24 is a digital audio format enabling high sound quality playback in 5.1-channels with a sampling frequency of 96 kHz and 24 bit quantization on DVD-Video. Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies.
ENGLISH Getting Started Surround Surround Modes and Parameters Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Center PURE DIRECT, DIRECT S D D D A D S (OFF) S (0dB) A A MULTI CH DIRECT S D D D A D A S (0dB) S (ON) S STEREO S A A A A D S (OFF) S (0dB) A EXT.
ENGLISH Signals and adjustability in the different modes Parameter (default values are shown in parentheses) Surround mode PRO LOGIC g/gx MUSIC mode only NEO:6 MUSIC mode only EXT. IN only MultEQ Dynamic EQ (NOTE5) Dynamic Volume (NOTE6) RESTORER (NOTE7) A Dimension C. Width Center Image SW ATT PURE DIRECT, DIRECT A A A A A A A A A MULTI CH DIRECT A A A A A A A A A A STEREO A A A A A S (0dB) S (OFF) S (OFF) S (OFF) S EXT.
ENGLISH Getting Started Surround Differences in Surround Mode Names Depending on the Input Signals Input signals Button PCM Connections Surround mode Note Linear ANALOG PCM (multi ch) DTS-HD Linear PCM (2ch) DTS-HD Master Audio DTS DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL EX DIGITAL (With no (5.
ENGLISH Input signals Button PCM Surround mode Note DTS Linear PCM (2ch) DTS-HD Master Audio DTS-HD High Resolution Audio DTS ES DTS ES DSCRT MTRX (With Flag) (With Flag) DOLBY DTS (5.1ch) DTS 96/24 DOLBY DIGITAL DOLBY DOLBY DIGITAL TrueHD Plus DOLBY DIGITAL EX (With Flag) DOLBY DOLBY DIGITAL DIGITAL EX (With (5.
ENGLISH Getting Started Troubleshooting Connections Settings If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other components operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malfunction. In this case, disconnect the power immediately and contact your store of purchase.
ENGLISH 42, 43 Symptom No picture appears. 45 42 – 25 Picture cannot be recorded. 11 50 – – 35 28 DVDs cannot be copied on a DVR. The menu screen and status indicators are not displayed. Cause • The connections between the AVR-1910 and monitor are faulty. • The monitor’s input setting is wrong. • PURE DIRECT mode is set. • The player is connected using the component input connectors, the monitor is connected using the video (yellow) output connectors. Countermeasure • Check the connections.
ENGLISH Getting Started GSIRIUS Satellite RadioH GHDMIH Connections Settings Playback Multi-Zone Symptom HDMI audio signals are not output from speakers. Cause Countermeasure • The “Manual Setup” – “HDMI • Set to “Amp” Setup” – “HDMI Audio Out” setting is set to“TV” No picture appears with HDMI connections. • The connections to the HDMI connectors are faulty. • HDMI input setting is improper. • The monitor is not compatible with copyright protection (HDCP).
ENGLISH Playback Multi-Zone If in step 3 the display does not flash at intervals of about 1 second, start over from step 1. • Power amplifier Front (A, B): Rated output: (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 90 W+90 W 125 W+125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Center: 90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.) 125 W (6 Ω/ohms, 1 kHz with 0.7 % T.H.D.) Surround: 90 W+90 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.
List of preset codes / Liste de codes préréglés Contec Contec/Cony Craig Crosley Crown CTX DEVICE SELECT : TV Television A B C 3M Addison Admiral Advent Adventura Aiko Akai Albatron Alleron America Action Ampro Amtron Anam Anam National AOC Apex Apex Digital Audiovox Aventura Axion Bang & Olufsen Barco Baur Belcor Bell & Howell Benq Blue Sky Bradford Brillian Brockwood Broksonic byd:sign Candle Carnivale Carver CCE Celebrity Celera Changhong Ching Tai Chun Yun Chung Hsin Citizen Clarion Coby 100 163
Telefunken TMK Toshiba U V W Y Z Totevision Trutech Tuntex TVS US Logic Vector Research Vidikron Vidtech Viewsonic Viking Viore Vizio Wards Westinghouse White Westinghouse Yamaha Yapshe Zenith 019 012 003, 004, 005, 006, 030, 051, 156, 177 153 091 158, 163 050, 141 090 137, 151 155 012, 030, 036 061, 076, 142 041 115 061, 093, 094, 095, 126, 144 010, 012, 030, 033, 036, 039, 137, 151, 155 061, 065, 140 T W RCA Sylvania F M P T G C D G H I L M O P R S Akai Apex Axion Coby Cytron DiamondVision Dis
I J L M N P R S T iBUYPOWER JVC Linksys Media Center PC Microsoft Mind Niveus Media Northgate Panasonic Philips Proscan RCA ReplayTV Samsung Sonic Blue Sony Stack Systemax Tagar Systems Tivo U V Z Toshiba Touch UltimateTV Viewsonic Voodoo ZT Group 035 063, 076 035 035 035 035 035 035 070 063, 065, 066, 067, 068, 072 077 063, 065, 072, 077 069 065, 067, 072 069 035, 064, 074, 078 035 035 035 063, 064, 065, 068, 073, 074, 078 035, 075 035 077 035 035 035 D E F G H Video Cassette Recorder A B C A
R Pioneer Primestar Proscan Proton RadioShack RCA S T U V Z Realistic Samsung Sharp Sony Star Choice STS Tivax Tivo Toshiba UltimateTV Uniden US Digital Viewsat Voom Zenith F G H J Jerrold L M B C D E ABC Adelphia Americast Antronix Archer AT&T Bell South Cable Vision Cabletenna Cableview Clearmaster ClearMax Colour Voice Comcast Comtronics Contec Coolmax COX Daeryung Director Dumont Eastern [009]z, 010, 012, 028, 040 007 047 014, 015 015 003 047 006 014 013 046 046 016 000, 005, 033 017 018 046
www.denon.com D&M Holdings Inc.