DN-202WR User Guide English ( 2 – 9 ) Guía del usuario Español ( 10 – 17 ) Guide d’utilisation Français ( 18 – 25 ) Guida per l’uso Benutzerhandbuch Appendix Italiano ( 26 – 33 ) Deutsch ( 34 – 41 ) English ( 42 – 46 )
User Guide (English) Introduction DN-202WR is a wireless audio receiver with professional-grade audio inputs. In conjunction with our DN-202WT wireless audio transmitter, this lets you add wireless audio transmission to your audio system—reducing cables and clutter without reducing sound quality. Please see this guide’s Setup chapter to learn how to integrate DN202WR with your audio system.
Features 5.8” (149mm) 2 3.4” (88mm) DN-202WR OUTPUT 2.4GHZ WIRELESS AUDIO RECEIVER 2 BAL. UNBAL. DC LEVEL STATUS PAIR UNBAL. 5V 3A SIGNAL L R 4 3 5 6 0dB 1 8 7 7 1.8” (45mm) 8 1. Power Input: Use the included power adapter to connect this input to a power outlet. See Setup for more information. 2. Wireless Antenna: This antenna receives the audio signal from a paired DN-202WT within range. DN-202WR has a range of 100 feet (30.5 meters). 3.
. Status Light: This LED indicates the DN-202WR’s pairing status: • Flashing slowly (approximately once per second): DN-202WR is not paired to a DN-202WT. • Flashing quickly (approximately twice per second): DN-202WR is “searching” for a DN-202WT. • Solidly lit: DN-202WR is paired to a DN-202WT. 5. Level Knob: Turn this knob to set the volume of the audio signal sent to the outputs. 6. Signal Lights: These LEDs light up when DN-202WR is receiving an incoming audio signal from DN-202WT. 7.
Setup For an example of how you could set up DN-202WR, please see the Example diagram later in this section. Items not listed under Introduction > Box Contents are sold separately. Important: For stereo operation, make sure left and right inputs are connected to left and right outputs, respectively. Make sure DN-202WR and DN-202WT are within 100 feet (30.5 meters) of each other. Do not use DN-202WR near a microwave oven, which can interfere with the reception. 1. Use XLR cables or 1/4” (6.
4. Use XLR cables or 1/4” (6.35mm) cables to connect your DN-202WR’s outputs (balanced or unbalanced) to your loudspeakers, mixer, amplifier, or other device that accepts line-level inputs (make sure this device is powered off). 5. Use the included power adapter to connect DN-202WR’s power input to a power outlet. It will power on immediately. 6. Connect your loudspeakers, mixer, amplifier, or other output device to a power outlet, but do not power it on yet. 7.
Example: PA loudspeakers Loudspeakers DN-202WT OUTPUT INPUT BAL. BAL. UNBAL. UNBAL. UNBAL. UNBAL. DN-202WR Microphones Mixer Items not listed under Introduction > Box Contents are sold separately.
Troubleshooting If you encounter a problem, try doing these things first: 8 • Make sure all cables and other connected devices are properly and securely connected. • Make sure you are using DN-202WR as described in this User Guide. • Make sure your other devices or media are working properly. • If you believe DN-202WR is not working properly, check the following table for your problem and solution. Problem: Solution: Please see: Power does not turn on.
Problem: Solution: Please see: DN-202WR does not pair to a DN-202WT or is having trouble maintaining a connection. Make sure the power inputs of the DN202WR and DN-202WT are properly connected to power outlets using the included power adapters. Setup Make sure the DN-202WR and DN202WT are within 100 feet (30.5 meters) of each other. If possible, remove any obstructions between DN-202WR and DN-202WT. If possible, power off or remove any nearby devices that transmit on a 2.4 GHz frequency.
Appendix (English) Technical Specifications Specifications are subject to change without notice. For optimal performance, place the product in the center of the room so it is unobstructed by walls, furniture, etc. Frequency Response 20 Hz – 20 KHz, +3 dB Signal-to-Noise Ratio > 80 dB THD < 0.
Wireless Specifications Power Channel 25 Modulation GFSK Bandwidth > 1.8 MHz Receiver Frequency: 2.404 – 2.476 GHz Receiver Range: Up to 100 ft. (30.5 m) Receiver Sensitivity: 10 dBm 100–240 V AC, 50/60 Hz 5 V DC, 3 A, center-positive (adapter included) Dimensions (width x depth x height) Weight 5.8” x 4.6” x 1.8” 149 mm x 117 mm x 45 mm 1.3 lbs. 0.6 kg Trademarks and Licenses Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries.
FCC Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Warnings This device complies with Industry Canada’s licence-exempt RSSs Operation is subject to the following two conditions: (1) This device may not cause interference and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence.
This radio transmitter (identify the device by certification number, or model number if Category II) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain and required antenna impedance for each antenna type indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
47
denonpro.com Manual Version 1.
Front Back DN-202WR Wireless Audio Receiver For applications where unsightly cable runs or drilling of holes is not permissible, the DN¬202 WT and WR combination is ideal for getting stereo audio from point A to B. The DN-202WT is a wireless audio transmitter with balanced XLR and ¼-inch inputs, enabling users to send audio from a professional audio mixer or source through walls and ceilings up to 200 feet (60m) away.
World Headquarters U.K. Office Germany Office inMusic Brands, Inc. inMusic Europe, Ltd. inMusic GmbH 200 Scenic View Drive Unit ~ Nexus Park Lysons Avenue Harkortstr. 12 - 32 40880 Ratingen Ash Vale HAMPSHIRE GU12 5QE GERMANY Cumberland, RI 02864 USA Tel: 401-658-5766 Fax:401-658-3640 UNITED KINGDOM Tel: 02102 7402 20150 Fax: 02102 7402 20011 Tel: 01252 896 040 Fax: 01252 896 021 denonpro.
Denon is a trademark of D&M Holdings Inc., registered in the U.S. and other countries. Denon Professional products are produced by inMusic Brands, Inc., Cumberland, RI 02864 U.S.A. DENON NEMA• is the registered trademark and service mark of the National Electrical Manufacturers Association. All other product names, company names, t~ademarks, or trade names are those of their respective owners. Product Warranty (for products purchased in the U.S.A.) PROFESSIONAL 1.
product, and the seller's name and address. To obtain an RMA number and assistance on where to return the product, contact Denon Pro customer service at 401-658-5766. Upon receipt, Denon Pro will repair or replace the defective products. Denon Pro may, at Denon Pro's sole option, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a product with a rebuilt, reconditioned, new or comparable product.
DENON l'ROFESSIONAL Product Warranty (for products purchased outside of the U.S.A.) 1. inMusic Brands, Inc. ("inMusic") warrants to the original purchaser that Denon Professional ("Denon Pro") products are free from defects in material and workmanship under normal use and service for the period commencing upon the date of purchase from an authorized Denon Pro dealer and continuing for the following period of time after that date for (1) Year. 2.
Return Information • • • A return merchant authorization number must be obtained from your local Denon Pro representative. For your representative go to denonpro.com . • A copy of the original sales receipt must also be included for the equipment to be repaired under warranty. • The faulty equipment must be packed in its original packaging. • One additional outer layer of packaging must be included to ensure product safety.
12. Power Sources (if applicable): This product should be connected to a power supply only of the type described in these operating instructions, or as marked on the unit. 13. Internal/External Voltage Selectors (if applicable): Internal or external voltage selector switches, if any, should only be reset and re-equipped with a proper plug for alternative voltage by a qualified service technician. Do not attempt to alter this yourself. 14.
pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Disposal of Batteries (if applicable): • Never dispose of any types of batteries In fire or near excessive heat or direct sunlight. Overheated batteries can rupture or explode. DENON PROFESSIONAL Garantfa del producto (para productos adquiridos fuera de EE.UU.) • If you are unsure of how or where to dispose of a battery, refer to your local ordinances for the proper location, method, etc. • Alkaline batteries & lithium button cell batteries: You can safely dispose of alkaline and lithium 1.