Installation Instructions

ON/OFF button
800 /1200 /1600
1.5V
20mA
Equipping the mouse with battery, insert the Nano receiver to the
USB port of your computer, pushing the ON button on the bottom
of the mouse, and the receiver will detect the device automatically,
plug and play.
The red light will flash once if you shift the DPI to the first gear,
will flash twice when you shift the DPI to the second gear, etc.
Also it will flash when the voltage is low.
Driver Instruction
1. Installation
2.Setting
These functions can be customized as below
3.Macro setting:
4.Other functions:
You can also adjust the speed of tracking , double-click and scrolling
After setting the functions please click “Apply”, if you need default
functions just click “Restore Defaults”
Basic: Cut, Copy, Paste, etc. 8 functions are available
Advanced: Switch window, close window, etc. 6 functions are
available
Media:Previous track, next track, stop, etc. 7 functions are available
Click “Assign Macro” to enter into Macro settings, click NEW and
name the macro, and click “Left click” on any blank space below
MACRO SELECT to confirm the name. Then Start Record, after
finishing the record, please click “STOP RECORD”, and click “OK”
to save the macro. After choosing certain macro, the background
of this macro will turn green, you can edit the macro.
1. 2.
3. 4. 5. 6.
Download the driver from or the CD in the
package, install the driver.
Note: Please make sure this mouse is already connected to
computer when setting the functions in the driver.
for optional
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modications not expressly approved by the
party responsible for compliance could void the user's authority to
operate the equipment.
NOTE: This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from
that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
M618MINI GX
M618mini GX海外说明书
梁莹/19.02.20
设计说明：
1、尺寸：135x90mm(公差+/-1mm)
2、材质：100g书写纸
3、颜色：单色双面印刷
4、装订方式：风琴折页