Download app Use your phone to scan the App QR CODE printed on the front of the FlashLink BLE In-Transit Logger. Both IOS® and Android® versions are available. Register Contact DeltaTrak to register your user name and password for on-line data management. You also can use Guest to login to manage the device and data (see Figure 1). Connect BLE device In the My Device Screen click on Add a Device. There are 3 methods to find and connect to the BLE logger (see Figure 2): A. Scanning the BLE logger code B.
Start the logger Press the button for 5 seconds till both LED’s light up. The ACTIVE LED will then flash every 5 seconds indicating the logger is working. Generating the PDF report A PDF trip report can be created by using the App (see Figures 6 and 7). PDF reports created by the app will not stop the logger, allowing for continued monitoring until the end of the trip duration. A. Click “PDF Report” B. After the report creation click “Share” C.
FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.