Installation Guide

ManualsBrandsDelta ManualsBathTrinsic 2-Handle Deck-Mount Roman Tub Faucet Trim Kit with Hand Shower in Champagne Bronze (Valve Not Included)

Para instalación fácil de su llave Delta

usted necesitará:

•LEER TODASlasinstruccionescompletamente

antesdeempezar.

•LEER TODOSlosavisos,cuidados,e

informacióndemantenimiento.

•Paracompletarelbordeylainstalaciónde

válvulasdentrodelasparedespreviaala

instalacióndelallaveysusaccesorios.

For easy installation of your Delta

faucet you will need:

•ToREAD ALLtheinstructionscompletely

beforebeginning.

•ToREAD ALLwarnings,care,andmaintenance

information.

•Tocompletethedeckandvalverough-inpriorto

installingthistrimkit.

Pour installer votre robinet Delta

facilement, vous devez:

•LIRE TOUTESlesinstructionsavantdedébuter;

•LIRE TOUSlesavertissementsainsiquetoutes

lesinstructionsdenettoyageetd’entretien;

•Installezlecorpsdurobinetetterminezle

pourtourdubainavantdeposerlesaccessories

definition.

Model/Modelo/Modéle

T2759&T4759

Series/Series/Seria

Trinsic

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:

Icons

1/8"(3.17mm)

1/8"

(3.17mm)

1/8po

3/32"

(2.38mm)

3/32po

ASMEA112.18.1/CSAB125.1

ICC/ANSIA117.1

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS

PARA BAÑERA ROMANA DE DOS

MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE

ROBINET À DEUX POIGNÉES POUR

BAIN ROMAIN

5/9/13Rev.D

72519

www.deltafaucet.com

Summary of content (8 pages)

PAGE 1
TWO HANDLE ROMAN TUB TRIM 72519 LLAVE Y SUS ACCESORIOS PARA BAÑERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN ASME A112.18.1 / CSA B125.1 ICC/ANSI A117.1 Model/Modelo/Modéle T2759 & T4759 Series/Series/Seria Trinsic® Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin: 1/8" (3.17mm) 1/8" (3.
PAGE 2
Limited Warranty on Delta® Faucets Parts and Finish All parts (other than electronic parts and batteries) and finishes of this Delta® faucet are warranted to the original consumer purchaser to be free from defects in material and workmanship for as long as the original consumer purchaser owns the home in which the faucet was first installed or, for commercial users, for 5 years from the date of purchase.
PAGE 3
Model / Modelo / Modèle T2759 ▲Specify Finish ▲ Especifíque el Acabado ▲ Précisez le Fini RP73162▲ Set Screw & Button Tornillo de Presión y Botón Vis de Calage et Bouton RP51287 Stream Straightener, Gasket & Wrench Enderezador del Chorro, Empaque y Llave Concentrateur de Jet, Joint et Clé RP73386 Set Screws & Buttons Tornillos de Ajuste y Botóns Vis de Calage et Boutons RP20368 Gasket Empaque Joint RP73161▲ Handle Base, Nut & Gasket Base de la Manija, Tuerca y Empaque Bae, écrou et joint de manette H659▲
PAGE 4
A. B. T4759 1 3 2 2 1 3 2 RP40668 Diverter Assembly Ensamble del Desviador Dérivation 1 Maintenance Cleaning and Care A. If faucet leaks from spout outlet–Shut off water supplies– Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. Replace Seats and Springs (1) - RP4993.
PAGE 5
1 T2759 2 T2759 5 8 7 1 1 3 4 1 6 2 3 T4759 T4759 5 1 7 8 2 3/32" (2.38 mm) 3/32 po 1 3 1 4 6 3 NOTE: The deck and valve rough-in must be finished before installing the trim kit. 2 Screw bases (1) with gaskets (2) over end valves (3). Option: Use silicone under the gasket if deck is uneven. Install gasket (4) and spout (5) on the spout adapter (6). Be sure spout is resting firmly on the deck. Install set screw (7) and tighten to secure the spout. Install button (8) into spout.
PAGE 6
3 A. C. T4759 T4759 1 1 2 4 3 B. D. T4759 T4759 1 1 2 For Model T4759 Only A. Install lift rod (1). Screw the lift rod until it drops down and C. Slide hose (1) through conical nut (2). Attach hose (1) to braided B. Remove and discard the test cap and gasket (1). NOTE: This is an D. Install base (1) onto nest (2) and tighten. OPTION: Use silicone metal hose (3) using gasket (4) and tighten. DO NOT install hand piece yet. rotates freely. extra gasket, one is supplied with the hose.
PAGE 7
5 4 T2759 1 1 T4759 1 1 2 2 Install handles. Be sure glide ring (1) is properly seated in bottom of handle before installing. Insert red button (hot) into handle on left side and blue button (cold) into handle on right side. If either handle does not rotate in the correct direction, do the following: 1. Be sure that the end valves are installed correctly (with the hot valve on the LEFT and both inlet tubes installed AWAY from the spout). 2.
PAGE 8
6 A. B. T4759 T4759 2 1 3 2 1 For Model T4759 Only A. Pull hose (1) to its farthest extension and point it down into the B. Attach hand piece (1) to hose (2) with gasket (3) between tub. Pull the lift rod (2) up to the full on position and flush water lines for one minute. After flushing turn off water at the bath valve handles. Return the lift rod to the down position. connection. Refer to maintenance section (page 4) for correct diverter and lift rod function.