Technical Specifications

Submitted Model No.: _______________________________________________
Specific Features: __________________________________________________
2711
2711-CBBRS
2711-LHP
COMPLETE VALVE COMPLIES WITH:
• ASME A112.18.1
• CSA B125
Indicates ADA compliance to
CABO/ANSI A117.1
BATH VALVES
■ Two Handle Roman Tub Faucet
■ Trim Only
■ Rough-In Kit Must Also be Ordered to
Complete Installation
■ Three Hole Installation
■ 8 9/16" (217 mm) Long Rigid
Slip-On Spout
■ Temperature and Volume
Controlled with Handles
2711/2711-LHP
2711-CBBRS
TRIM STANDARD SPECIFICATIONS:
• Trim Only for two handle Roman Tub faucet for
concealed mounting.
• Clear knob handles with red/blue indicators, brass
lever handles or LHP–Less Handle Program. See
available handle options on back.
• 8 9/16” (217 mm) long slip-on rigid spout.
• Temperature and volume controlled with handles.
NOTE: Rough-In kit must also be ordered to
complete installation. Refer to rough-in kits and
installation aids on back to determine the best kit
for your situation. There are separate specification
sheets on each rough-in kit if more details are
required.
ROUGH-IN KIT
STANDARD SPECIFICATIONS:
• Washerless.
• Three hole installation.
• 5/8” O.D. copper supply inlet/outlet tubes.
RP18227 and RP18235 outlet tubes are
corrugated copper.
• RP18227 and RP18235–Flexible widespread mount.
•
RP23601–10” (254 mm) fixed centers.
• Deck or ledge mount installation.
• Solid fabricated brass end valves and spout body.
• Control mechanism shall be of the rotating
cylinder type with stainless steel plate and 180°
rotation, with replaceable non-metallic seats
operating in stainless steel lined sockets.
• Hot and cold stems are interchangeable.
•
Temperature and volume controlled with handles.
• All operating parts shall be replaceable from the top.
2 7/8"
(73 mm)
2 7/8"
(73 mm)
3"
(76 mm)
Dia.
3"
(76 mm)
Dia.
8"–16" ❖
(203 mm–406 mm)
Centers
(Flexible)
8"–16" ❖
(203 mm–406 mm)
Centers
(Flexible)
2 7/8"
(73 mm)
3"
(76 mm)
8 9/16"
(217 mm)
8 9/16"
(217 mm)
Delta reserves the right (1) to make changes in specifications and materials, and (2) to change or discontinue models, both without notice or obligation. Dimensions are for reference only.
5
10
15
20
25
30
18.9
0
0 102030405060708090
Pressure (PSI)
Flow (U.S. Gallons Per Minute)
0 69 138 207 276 345 414 483 552 621
0
37.9
56.8
75.7
94.6
113.6
Pressure (kPa)
Flow (Liters Per Minute)
4 1/2"
(114 mm)
4 1/2"
(114 mm)
®
®
U
P
C
UL Listed to US and Canadian
Safety Standards
21PL
2.D.34
❖ For Lever Handles Use 10"-16" Centers.