Installation Instructions

ManualsBrandsDelta ManualsBathClassic Two-Handle Deck-Mount Roman Tub Trim Kit with Valve

Para instalación fácil de su llave

Delta usted necesitará:

• LEER TODAS las instrucciones completamente

antes de empezar.

• LEER TODOS los avisos, cuidados, e

información de mantenimiento.

• Para completar el borde y la instalación de vál-

vulas dentro de las paredes previa a la

instalación de la llave y sus accesorios.

For easy installation of your Delta

faucet you will need:

• To READ ALL the instructions completely

before beginning.

• To READ ALL warnings, care, and mainte-

nance information.

• To complete the deck and valve rough-in prior

to installing this trim kit.

Pour installer votre robinet Delta fac-

ilement, vous devez:

• LIRE TOUTES les instructions avant de déb-

uter;

• LIRE TOUS les avertissements ainsi que toutes

les instructions de nettoyage et d’entretien;

• Installez le corps du robinet et terminez le

pourtour du bain avant de poser les accessories

de finition.

TWO HANDLE ROMAN TUB TRIM

LLAVE Y SUS ACCESORIOS

PARA BA—ERA ROMANA DE DOS

MANIJAS (MANERALES)

ACCESSOIRES DE FINITION DE

ROBINET À DEUX POIGNÉES

POUR BAIN ROMAIN

Write purchased model number here.

Escriba aquí el número del modelo comprado.

Inscrivez le numéro de modèle ici.

Models/Modelos/Modèles

T2710 Series/Series/Seria

You may need/Usted puede necesitar/

Articles dont vous pouvez avoir besoin:

SILICONE

Icons

3/32” (2.38mm)

Step D

3750017

1/8” (3.17mm)

SILICONE

3/32” (2.38mm)

1/8” (3.17mm)

07/20/2020 Rev. C

RP18356

Spout Assembly

3750018

77498

Summary of content (8 pages)

PAGE 1
77498 TWO HANDLE ROMAN TUB TRIM LLAVE Y SUS ACCESORIOS PARA BA—ERA ROMANA DE DOS MANIJAS (MANERALES) ACCESSOIRES DE FINITION DE ROBINET À DEUX POIGNÉES POUR BAIN ROMAIN Models/Modelos/Modèles T2710 Series/Series/Seria Write purchased model number here. Escriba aquí el número del modelo comprado. Inscrivez le numéro de modèle ici. You may need/Usted puede necesitar/ Articles dont vous pouvez avoir besoin: SI LI CO NE TEF LO N 1/8” (3.17mm) 3/32” (2.
PAGE 2
Cleaning and Care WARNING: Care should be given to the cleaning of this product. Although its finish is extremely durable, it can be damaged by harsh abrasives or polish. To clean, simply wipe gently with a damp cloth and blot dry with a soft towel. Scrubbing Bubbles ® Bathroom Cleaner and Lysol ® Basin Tub and Tile Cleaner must not be used on the clear knob handles and levers. Use of these cleaners can result in cracked or severely damaged handles.
PAGE 3
4 pSpecify Finish/Especifíque el Acabado/Précisez le Fini RP18543p Base w/Gasket Base con Empaque Base avec Joint RP18358p Plug Button & Set Screw Botón de Tapon y Tornillo de Ajuste Bouton avec Vis de Calage RP18395 Set Screw Tornillo de Ajuste Vis de Calage RP18360 Gasket & Clips Empaque y Presilla Joint et attaches RP18357p Stream Straightener Enderezador del Chorro Concentrateur de jet RP18359 Screw–Anti Swivel Tornillo–Antigiratorio Vis–Antipovotement RP18356 Spout Assembly 3750018 Contact your
PAGE 4
Limited Warranty on Delta® Faucets In the United States and Mexico: Delta Faucet Company Product Service 55 E. 111th Street Indianapolis, IN 46280 Attention: Customer Solutions www.deltafaucet.com/service-parts/contact-us Parts and Finish.
PAGE 5
Template/Plantilla/Gabarit CAUTION: Drill 5/16” (7.94mm) diameter hole for anti-swivel pin only on T2710 series spout models. Do not drill hole for any other series or other roman tub models since spout base will not cover the drilled hole. AVISO: Taladre un agujero con diámetro de 5/16” (7.94mm) para la clavija anti-giradora sólo en modelos de surtidores de la serie T2710.
PAGE 6
1 C. A. 2 1 1 3 4 B. 2 1 A NOTE: The deck and valve rough-in must be finished before Step installing the trim kit. 3750017 nscrew the test cap (1) and discard. A. U E. Screw anti-swivel pin (1) into spout base. Install spout (2) with gasket (3) on spout adapter (4). Note: If deck is uneven, use silicone under the gasket. B. Using template (1) on page 8, drill a 5/16” (7.94mm) hole (2) in deck for anti-swivel pin. NOTE: This hole may NOT be covered by other spouts.
PAGE 7
D. 4 1/8” (3.17 mm) 6 3 5 1 2 6 E. 2 3/32” (2.38mm) Step C 3750017 2 1 D. Install the set screw (1) and tighten to secure the spout (2). Insert the Note: I f either handle does not rotate the correct direction, do the following: plug button (3). Remove the excess sealant. Screw bases (4) with gaskets (5) over end valves (6). Note: For tile applications that use the RP18235 Thick Tile Rough-In, discard the black gaskets and use silicone under the bases. 1.
PAGE 8
2 2 1 3 2 1 4 2 1 Maintenance Remove stream straightener (1) and turn faucet handles (2) all the way on. Turn on hot and cold water supplies and flush water lines for one minute. If faucet leaks from spout outlet–Shut off water supplies–Replace Seats and Springs (1).* If leak persists–Shut off water supplies–Replace Stem Unit Assembly (2).* Important: This flushes away any debris that could cause damage to internal parts.