Instructions / Assembly
CP5995423
ROUND MIRROR INSTALLATION INSTRUCTIONS
Wear Safety Goggles
You will need:
� Tape Measure
� Level
� Pencil
� Drill
� Hammer
� Screw Driver
� 2 Plastic Anchors (included)
� 2 L-Screws (included)
For More Information or Assistance Visit:
www.deltamirrors.com or 1-800-635-2731.
Limited 1 year warranty.
1. Using a level, mark 2 points on the wall 4.5" apart.
2. If installing into solid wood or stud: Drill 3/32" pilot holes at marked points.
If installing into drywall: Drill 5/16" holes at marked points, tap anchors into holes using hammer.
For concrete or other surface installation: Use anchors designed for your application and follow all
manufacturer’s installation instructions.
3. Install L Screws in anchors or pilot holes, leaving bent end of screw pointing upwards and spaced
3/4" from wall.
4. Carefully hang mirror on the L-screws using bracket on back of mirror.